TPA3116D2 bluetooth 5.0 HIFI Digital Power Amplifier 2.1 High-power Board 12-24V Subwoofer Bass Board
$38.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:TPA3116D2 2.1 high-power HIFI digital power amplifier board
Chip type:TPA3116D2
Chip protection:overvoltage, undervoltage, overheating, DC detection and short circuit
Operating voltage range:DC 12-24V (current 4A or more)
Audio input sensitivity:500-800mV,
Frequency response range:20Hz-20KHz
Speaker Impedance
Left and right channel speakers:3.5-8 Ohm
Bass speaker Impedance:2-8 Ohm
The maximum output power:50W (left channel) +50 W (right channel) +100 W (subwoofer)
Maximum output power:100w (2 ohm speakers connected)
Number of channels:2-channel stereo
Size:101* 100 * 26mm
Packaging Included
1 x TPA3116 Digital Amplifier Board
Product Questions
1. Amplifier board has current sound and noise during use
Most of our amplifier board use DC power supply. The board itself does not produce current sound and noise.
The main causes of current acoustic noise are
A, The power supply filter used is not good; the current sound is caused by wrong input by the power or audio input.
B, The input signal quality is poor; the output of the device connected to the input is improper, and the noise is caused by the abnormal input of the audio source.
C, The input cable is of poor quality; the line is in poor connect; the wiring is damaged; the wiring is suspended
D, The input connection has other playback devices, and some devices share the power supply to cause noise.
2. No sound output, no sound in 1 channel
A, The speaker is broken, or the speaker cable is not connect well.
B, The input cable is not in good connect; the wiring is damaged; the output of the device connected to the input is improper.
3. Volume broken and breaking sound when turn loud
A, The power input is insufficient, confirm the wiring is correct first, and the supply current is sufficient,
B, The speaker itself has poor performance or damage, and the speaker power is too small or too large.
C, left and right channel speakers (+) (-) output are independent, can not be connected to each other
4. Speaker broken sound when subwoofer amplifier volume turn loud
A, The power input is insufficient, first confirm the wiring is correct, the supply current is enough
B, Whether the power of the speaker itself is too large or too small, or the bass performance of the speaker itself is poor; the structure of the speaker box; these abnormalities will cause breaks.
5.The volume power is not enough
Power and power supply voltage, the amplitude of the sound source signal, the size of the speaker impedance are all related, any kind of deficiency will affect the power
6. Will the amplifier be burnt
A, The positive and negative poles of the power supply are connected reversely; the power supply voltage is too high, exceeding the limit operating voltage of the board
B. If the board requires a DC power supply, it is not allowed to connect directly the AC transformer power supply (this can be rectified and converted to DC power before it can be used)
C. To confirm that the wiring is correct, then connect with the power supply. The wrong line connected or the short circuit both will cause damage to key parts.
Weight | 0.196 kg |
---|
Customers Also Viewed
29Pcs/Set 24/29 Laboratory Glassware Kit 25/50/100/250/500mL Flask Lab Chemistry Glass Ground Joint Distillation Separation
$261.21Lab ChemicalsAdd to cartDescription1. Be made of G3.3 borosilicate glass.This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating laboratory glassware.Annealing Point:560℃Linear Coefficient of Expansion:32*10-7/℃Softening Point:820℃2. The thickness of the flask wall is 2.5mm.3. All of the joint is 24/29,This kit has 18 kinds of parts as belowNo.:Specification:Part name:Quantity1:24/29:Claisen adapter:12:24/29:75°Distillation adapter:13:24/29:Vacuum take-off adapter:14:24/29:Inlet/Thermometer adapter:15:24/29 …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction Rotation
$10.11Other Module BoardAdd to cartDescription Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your application. These days miniature vibrating motors …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction RotationRead More
D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Module Geekcreit for Arduino – products that work with official Arduino boards
$13.11Motherboard & Development BoardAdd to cartGithub:Click here to openMore information:Click here to openDescriptionBased on the ESP-8266EX.Compatible, you can use it on IDE.NodeMcu Compatible11 Digital I/O pins1 Analog Input pinOTA — Wireless Upload(Program)On board switching power supply — Max 24V input, 5V 1A outputWhat’s new about V2.1.0Use BRT (Bias Resistor Transistor), easier into flash mode.Optimize the circuit, the system is more …
1.54 inch Electronic Flexible ink Screen Display Module Black and White Dual Color e-Parper OLED
$39.35Display ScreenAdd to cartFeatureWorking voltage:DC 5VWorking current:150mAMaximum power:0.75WDisplay color:black and whiteDisplay size:1.54 inch/2.13 inchDisplay resolution:200*200/250*122Interface type:8pin header with 2.54mm pitchOperating temperature range:-20C to +60CPositioning hole size:diameter 3mmHeight:7mmPackage includes1 x Display board
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3B
$34.43Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsSize:65*56*24mm Weight:27gPins:Raspberry Pi GPIOOutput Voltage:3.3V/5V (IO VCC:3.3V)Analog Port-Input:4 Analog inputs are converted to Digital AD input-Output:Digital input simulated to Analog DA outputDigital Port:27 Digital IOI2C:3 Way I2C(BCM2,3)Serial Port:1 Way Serial Port(BCM14,15)SPI:1 Way …
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3BRead More
Wooden Christmas Advent Calendar Christmas Elk Decoration Fits 25 Circular Chocolates Candy Stand Rack
$21.57ChemistryAdd to cartSpecificationName:Wooden Christmas CalendarSize:Approximately 40x35cm (15.7X13.8in)Material:WoodenFeatureIt is sent flat packed, simply slot the stand together and place the tree into the stand and fill with your chocolates.Package Included1 x Christmas Calendar (The Chocolate is NOT included)
3PCS USB Microphone for Raspberry Pi
$27.14Raspberry Pi & Orange PiAdd to cartFeature1. Sensitivity:-47dB ÷ 4dB2. Sensitivity reduce:-3dB at 1.5V3. Working Voltage:4.5V4. Frequency response:100 ~ 16kHz5. SNR:More than -67dB6. Cable length:0.7-0.9MThe effective distance of 2 meters or morePackage included3xUSB Microphone For Raspberry Pi
Reviews
There are no reviews yet.