HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
500pcs 0805 (2012) SMD White LED Chip Surface Mount SMT Beads Ultra Bright Light Emitting Diode LED Lamp Electronics Components
$26.89Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionQuantity:500 pieces Size:2.0 x 1.2 (mm) / 0.08 x 0.05 (inch)Emitting Color:White (6000K-9000K)Luminous Intensity:180-210mcdViewing Angle:120 DegreeForward Voltage / Current:3V-3.2V | 20mAPolarity:Refer to the Arrow on the Reverse SidePackage included500 x 0805 (2012) …
5pcs AC 100-240V to DC 12V 5A 60W Switching Power Supply Module Driver Adapter LED Strip Light
$52.97Power Supply ModuleAdd to cartFeatures1. Good anti-interference performance and high reliability.2. Low operating temperature and long service life.3. Wide input voltage range, (100-240V) in line with global usage standards.4. Good insulation performance and high electric strength.5. Full load high temperature burning machine, 100% aging test.SpecificationsModel:HS-60-12DC output voltage:12VOutput voltage tolerance:±1%Rated output current:5AOutput current range:0 – 5ARipple and noise:100mVp-pLine stability:±0.5%Load stability:±0.5%DC …
4Pcs 5mm Reusable Clear Bent Glass Drinking Straws Water Juice Straws with Cleaning Brush
$22.26Bottles & JarsAdd to cartSpecificationColor:ClearMaterial:High Borosilicate GlassTube Mouth Shape:RoundTemperature Resistance:-20~450℃Total Length:21.5cm / 8.46inchInner Diameter:0.5cmFeatures– Non-toxic environmentally friendly green borosilicate heat-resistant material, safe to use, not stain, will not fade.– Widely used, can drink water, milk, juice, coffee, coke, soda, etc.– Could put it into the microwave for sterilization.Package Included4 x Glass Drinking Straws1 x Cleaning Brush
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield Curtain
$19.83Mesh & Wire ClothAdd to cartDescriptions5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainSpecificationsSizeRear Sun Visor:50 * 100 CmThe Front Side Of The Sun Visor:36 * 44 CmThe Back Side Of The Sun Visor:36 * 44 CmMaterial:3D Photocatalyst MeshWeight:Approx.60 gFeatures– Convenient to use and take down with two suckers.– Can reflect 90% direct sunlight and …
5Pcs Car Window Sun Visor Screen Car Side Rear Window Screen Sunshade Shield CurtainRead More
5Pcs Micro USB TP4056 Charge And Discharge Protection Module Over Current Over Voltage Protection
$9.32Battery Protection ModuleAdd to cartCharacteristicOn-board TP4056 lithium battery charging management chipOn-board micro USB head, can be directly connected with most of the smart phone charger as the input side to the lithium battery chargingReserved IN+ and IN- input port, convenient user DIYOn-board charging status indicatorSupport charge discharge over current protectionChip with constant current and constant pressure, full automatic stopSupports …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header Version
$6.10Sensor & Detector ModuleAdd to cartDescriptionThis is a commonly used TEMT6000 light sensor which mainly uses TEMT6000X01 components. The component is a highly sensitive visible light sensitive (NPN) transistor. The sensor can magnify the change of the tiny light rays captured about 100 times, and is easily recognized by the microcontroller for AD conversion. Its response to visible light illumination …
Keyes Brick TEMT6000 Light Sensor(Pad hole) Analog Signal Module with Pin Header VersionRead More
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB Port
$301.75Smart Robot & Solar PanelAdd to cartFeatures– The outermost layer of the product is made of thick and breathable nylon bag. It`s easy to carry and portable coz it`s folable and has a handle, which is suitable for camping, hiking, hiking, and can be used as a backup power source for mobile phones and car batteries.– It`s equipped a USB&DC junction …
100W18V Foldable Portable Monocrystalline Solar Panel with 5V USB PortRead More
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature Sensor
$15.30Sensor & Detector ModuleAdd to cartDescriptionThe HDC1080 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The HDC1080 operates over a wide supply range, and is a low cost, low power alternative to competitive solutions in a wide range of common applications. The humidity and temperature sensors are factory calibrated.FeaturesRelative Humidity …
GY-213V-HDC1080 High Accuracy Digital Humidity Sensor with Temperature SensorRead More
Reviews
There are no reviews yet.