HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
200pcs 20cm Male to Male Color Breadboard Jumper Cable Dupont Wire
$16.16Electronic Accessories & SuppliesAdd to cartDescription Durable and reusable Easy to install and use A popular choice for construction or repair Be used for electronic project and Genuine product. Specification Length:20cm Quantity:five row of 40 roots 1p-1p pin male to male header Compatible with 2.54mm spacing pin headers Package includes 200 x male to male jumper wire
3pcs ESP8266 ESP-12S Remote Serial Port WIFI Transceiver Wireless Module
$29.04Smart ModuleAdd to cartDescriptionBased on ESP8266 wifi ICFully compatible with forepast versions ESP-12E, or ESP12FFCC&CE&RoHS all passedLow-power consumptionFurther improved antenna design, better signal performanceCan refer to ESP-12F for other infosPackage included3 x ESP-12S Wireless Module
96Pcs Chicken Plucker Fingers Rubber Poultry Duck Turkey Goose Feather Plucking Glue Stick
$99.21Solar CollectorsAdd to cartFeatures-The glue stick has the advantages of high wear resistance, soft texture, large elasticity, no easy breaking, good hair removal effect, low skin breaking rate and the like.-Widely used in chickens, ducks, geese and other slaughter equipment.SpecificationName:Chicken PluckerMaterial:Nat-rubberColor:Yellow or BlackSizes:20 x 65mmPackage included96 x Chicken Plucker glue stickNoteSilicone products, the edge is expected to belong …
96Pcs Chicken Plucker Fingers Rubber Poultry Duck Turkey Goose Feather Plucking Glue StickRead More
10pcs 1838T infrared Sensor Receiver Module Board Remote Controller IR Sensor with Cable
$31.47Sensor & Detector ModuleAdd to cartFeatures– Can receive standard 38KHz remote control signals by means of programming can decode the remote control signals– Strong ability to resist electromagnetic interference and light– Widely used in stereo, TV, set-top boxes, digital photo frame, car stereo, remote control toys, satellite receivers, hard disk players, air conditioner, heater, electric fan, lighting and other home …
10pcs 1838T infrared Sensor Receiver Module Board Remote Controller IR Sensor with CableRead More
3pcs CC1101-868MHz 2-3.6V RF Low Power UHF Wireless Transceiver Module 1.2K To 500kps 64 Bytes SPI
$29.02Smart ModuleAdd to cartDescriptionThe CC1101-868MHz RF module is low cost and highly integrated UHF transceiver designed for low power wireless applications. These pro certificate modules, operating in the license free 868 MHz ISM band, can be easily integrated into your application, thereby reducing development time and cost.FeaturesLow power UHF wireless transceivers @868MHzSupport FSK, GFSK, ASK/OOK and MSKConfigurable data …
Geekcreit Upgrade DIY EC1515B DS1302 Light Control Rotation LED Electronic Clock Kit Size 81x81x2mm
$13.11DIY Electronic KitsAdd to cartDesign Red digital tube+ Red & Green LED with housing / Design Red digital tube+ Red & Blue LED with housing / Design Red digital tube+ Red & Blue LED without housing / Design Red digital tube+ Red & Green LED without housing / Design Blue digital tube+ Red & G
Reviews
There are no reviews yet.