HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
BG01 GPS Module GPS+BDS Beidou Dual-mode Satellite Positioning and Navigation Module Wireless Transmission
$16.15Smart ModuleAdd to cartDescriptionThe BG01 is a highly integrated GNSS SOC module, Main chip is GK9501.It is a high-integration Multi-GNSS SOC that supports BDS/GPS/GLONASS/GALILEO/QZSS/SBAS with low power consumption. It integrates DC/DC,LDO, LNA, RF receiver,Base Band, 32-bit RISC CPU, RAM, Flash, RTC and PMU,and provides kinds of interfaces like UART, I2C, SPI and GPIO.The BG01 supports crystal and TCXO …
Wareshare 5 inch VGA HDMI High Definition Display Capacitive Touch Screen Support for NVIDIA Jetson Nano Raspberry Pi
$99.13Display ScreenAdd to cartOverviewThis product is a universal 5-inch HDMI display with 800 x 480 HD resolution and a capacitive touch panel. Support for Raspberry Pi, NVIDIA Jetson Nano and various mini PCs, as well as computer monitors.FeaturesThe hardware resolution is 800*480, and the resolution can be configured by software (up to 1920*1080)Support mainstream mini PCs such as …
3pcs USB To RS232 TTL PL2303HX Cable Adapter Module Converter for
$12.46Electronic Accessories & SuppliesAdd to cartDescriptionUSB TO RS232 TTL PL2303HX Auto Converter Module Adapter 5V Output, provides the best and convenient way to connect your RS232 TTL devices or DEMO BRD. To your computer, via the usb port.SpecificationBuilt-in TTL COM PC-PL2303HX ChipStandard USB type A male and TTL 4 pin connectorCable length:1000mm (39 3/8 in)Simple and Easy way to give …
3pcs USB To RS232 TTL PL2303HX Cable Adapter Module Converter forRead More
Desktop Telephone Wireless Telephone 4G Wireless GSM Desk Phone SIM Card Desktop Telephone Machine
$66.81Switch AccessoriesAdd to cartProtable Wireless Terminal GSM Desk Phone SIM Card Mobile Desktop Telephone SpecificationOperating Frequency:GSM900MHz and GSM1800MHzOutput PowerGSM900 way:Class 4 (2W)GSM1800 mode:Class 1 (1W)Working Temperature:0 ~ 55 degreeRelative Humidity:5 % to 95%Adapter Input Voltage:AC 50Hz, 220V +10%Backup Battery:Ni-MH battery ,1000 mAhStandby Time:48-72 hours , depending on the network status may be ( battery power )Talk Time:2-6 hours, …
CBB60 5Pcs 55UF 450V Water Pump Motor Run Capacitor
$68.39Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 55UF 450V Water Pump Motor Run CapacitorRead More
3pcs 2S 10A 7.4V 8.4V 18650 Lithium Battery Protection Board Balanced Function Overcharged Protection
$8.59Power Supply ModuleAdd to cartSpecificationsModel:HX – 2S – D20 Overcharging range:4.25-4.35V ( ±0.05V)Over voltage range:2.5-3.0V (± 0.05 V)Maximum working current:13A Working temperature:- 40 – 50 →Maximum instantaneous current:20A Storage conditions:- 40 – 80 →Static current:less than 10uAResistance:less than 300 m ΩShort circuit protection:to protect and restore must chargeCharging Voltage:8.4 V – 9VBoard Size:46 x 20 x 3.6 mmWelding PointB:battery …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.