3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Module name:400W boost constant current module
Module nature:non-isolated boost module (BOOST)
Input voltage:DC8.5V-50V
Input current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipation
Static working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)
Output voltage:10-60V continuously adjustable (suitable for applications where the input voltage is lower than the output voltage and cannot be stepped down.)
Output current:12A MAX exceeds 7A or the module temperature exceeds 65 degrees, please strengthen heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)
Constant current range:0.2-12A
Maximum output power:= input voltage*10A, such as:input 12V*5A=60W, input 24V*5A=120W,
Input 36V*5A=180W, input 48V*5A=240W,
Working frequency:150KHz
Conversion efficiency:96% typical (efficiency is related to input, output voltage, current, and pressure difference)
Overcurrent protection:Yes (when the input exceeds 15A, the output voltage will be automatically reduced with a certain range of error.)
Installation method:4 2.5mm screw holes
Wiring mode:terminal block
Module size:length 67mm width 48mm height 28mm
Module net weight:about 65 grams
Output voltage/current adjustment method
1. Adjust the output voltage potentiometer (increase the voltage counterclockwise and decrease the voltage clockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V. (Turn the voltage up counterclockwise and turn down the voltage clockwise)
2. Adjust the output current potentiometer clockwise about 30 turns, set the output current to the minimum, connect the LED, and adjust the current potentiometer to the current you need. For battery charging, after the battery is discharged, it is connected to the output to adjust the current. (When used for charging, the discharged battery must be used for adjustment, because the more battery remaining in the battery, the lower the charging current .) (turn down clockwise current, turn up anticlockwise current)
Note
Please do not use short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.
Application range
1. DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. As a vehicle power supply, it can supply power to your laptop, PDA or various digital products.
4. DIY a high-power notebook mobile power supply:equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.
5. The solar panel voltage stabilizes.
6. Charging batteries, lithium batteries, etc.
7. Drive high-power LED lights.
Package included
3 x Power Supply Module
Weight | 0.24 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.