3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Module name:400W boost constant current module
Module nature:non-isolated boost module (BOOST)
Input voltage:DC8.5V-50V
Input current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipation
Static working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)
Output voltage:10-60V continuously adjustable (suitable for applications where the input voltage is lower than the output voltage and cannot be stepped down.)
Output current:12A MAX exceeds 7A or the module temperature exceeds 65 degrees, please strengthen heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)
Constant current range:0.2-12A
Maximum output power:= input voltage*10A, such as:input 12V*5A=60W, input 24V*5A=120W,
Input 36V*5A=180W, input 48V*5A=240W,
Working frequency:150KHz
Conversion efficiency:96% typical (efficiency is related to input, output voltage, current, and pressure difference)
Overcurrent protection:Yes (when the input exceeds 15A, the output voltage will be automatically reduced with a certain range of error.)
Installation method:4 2.5mm screw holes
Wiring mode:terminal block
Module size:length 67mm width 48mm height 28mm
Module net weight:about 65 grams
Output voltage/current adjustment method
1. Adjust the output voltage potentiometer (increase the voltage counterclockwise and decrease the voltage clockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V. (Turn the voltage up counterclockwise and turn down the voltage clockwise)
2. Adjust the output current potentiometer clockwise about 30 turns, set the output current to the minimum, connect the LED, and adjust the current potentiometer to the current you need. For battery charging, after the battery is discharged, it is connected to the output to adjust the current. (When used for charging, the discharged battery must be used for adjustment, because the more battery remaining in the battery, the lower the charging current .) (turn down clockwise current, turn up anticlockwise current)
Note
Please do not use short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.
Application range
1. DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. As a vehicle power supply, it can supply power to your laptop, PDA or various digital products.
4. DIY a high-power notebook mobile power supply:equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.
5. The solar panel voltage stabilizes.
6. Charging batteries, lithium batteries, etc.
7. Drive high-power LED lights.
Package included
3 x Power Supply Module
Weight | 0.24 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.