3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Module name:400W boost constant current module
Module nature:non-isolated boost module (BOOST)
Input voltage:DC8.5V-50V
Input current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipation
Static working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)
Output voltage:10-60V continuously adjustable (suitable for applications where the input voltage is lower than the output voltage and cannot be stepped down.)
Output current:12A MAX exceeds 7A or the module temperature exceeds 65 degrees, please strengthen heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)
Constant current range:0.2-12A
Maximum output power:= input voltage*10A, such as:input 12V*5A=60W, input 24V*5A=120W,
Input 36V*5A=180W, input 48V*5A=240W,
Working frequency:150KHz
Conversion efficiency:96% typical (efficiency is related to input, output voltage, current, and pressure difference)
Overcurrent protection:Yes (when the input exceeds 15A, the output voltage will be automatically reduced with a certain range of error.)
Installation method:4 2.5mm screw holes
Wiring mode:terminal block
Module size:length 67mm width 48mm height 28mm
Module net weight:about 65 grams
Output voltage/current adjustment method
1. Adjust the output voltage potentiometer (increase the voltage counterclockwise and decrease the voltage clockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V. (Turn the voltage up counterclockwise and turn down the voltage clockwise)
2. Adjust the output current potentiometer clockwise about 30 turns, set the output current to the minimum, connect the LED, and adjust the current potentiometer to the current you need. For battery charging, after the battery is discharged, it is connected to the output to adjust the current. (When used for charging, the discharged battery must be used for adjustment, because the more battery remaining in the battery, the lower the charging current .) (turn down clockwise current, turn up anticlockwise current)
Note
Please do not use short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.
Application range
1. DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. As a vehicle power supply, it can supply power to your laptop, PDA or various digital products.
4. DIY a high-power notebook mobile power supply:equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.
5. The solar panel voltage stabilizes.
6. Charging batteries, lithium batteries, etc.
7. Drive high-power LED lights.
Package included
3 x Power Supply Module
Weight | 0.24 kg |
---|
Customers Also Viewed
2 Channel Relay Module 12V with Optical Coupler Protection Relay Extended Board
$6.55Relay ModuleAdd to cartDescriptionDimensions:50.6 x 38.8 x 19.3mm (L x W x H)Weight:30gThe board is surrounded by four fixed screw holes with a diameter of 3.1 mm, which is convenient for installation and fixing.High quality relay, single-pole double-throw. One common end, one constant beginning, one constant closing end.Photocoupler isolation, good anti-interferenceLow level suction, high level release. The state …
2 Channel Relay Module 12V with Optical Coupler Protection Relay Extended BoardRead More
3pcs TB371 4 Key MCU Keyboard Button Board Compatible UNO MEGA2560 Pro Mini Nano Due for Raspberry Pi Teensy++ Geekcreit for Arduino – products that work with official for Arduino boards
$9.06Other Module BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description1. 4-button Common Cathode key module(When pressed output low level). 2. GND K1 K2 K3 K4′ 4 PIN OUT 2.54mm3. Working voltage:DC 0-48V 4. Size:12.7 x 33mm5. It can be inserted directly …
DC 12V/5V MP3 Decode Board LED USB AUX FM bluetooth Radio Amplifier with Remote
$15.30Amplifier BoardAdd to cartDescriptionStereo bluetooth 12V/5V lossless WAV music decoder, WMA / MP3 / FM speaker panel modules, support breakpoint memoryFeatures1. Support USB, SD, support for external signal directly switch2. Support for stereo bluetooth (bluetooth3.0EDR)3. Support USB / SD / bluetooth / FM / LINE switch automatically.4. Support MP3 / WMA / WAV lossless songs.5. Support USB / …
DC 12V/5V MP3 Decode Board LED USB AUX FM bluetooth Radio Amplifier with RemoteRead More
Professional Reflector Astronomical Telescope + Adjustable Tripod Science Education for Gift
$91.11PhysicsAdd to cartSpecificationProduct Name:TelescopeModel:E31375Size:56x74x15.7cm/22×29.1×15.7inColor:MulticolorObjective Focal length:600mmClear aperture:50mm (2 ″)Scope:4 * 18Field of View:1 degreeFinder Scope Magnification 3xEye-Piece Magnifications:F=6mm for 100x magnification and F=12mm for 50x magnificationNote:With the H6 eyepiece (100 times), you can see the craters and craters of the moon, and you can observe sunspots with special sunglasses. H12 eyepieces (50x) can be used as 50x …
TTL to RS485 Module Hardware Automatic Flow Control Module Serial UART Level Mutual Converter Power Supply Module 3.3V 5V
$4.36Converter BoardAdd to cartFeatures(1) The module is fully considered mine design, long-distance transmission signal 485 in the wild, the module inchConnected to the groundinch terminal is connected to the earth, can play a very good anti-jamming and anti- effect, more secure; it can not connect with the ground when the indoor short-distance transmission. (2) Using the standard 2.54 …
30pcs 270uF 16V 8x8mm Low ESR 16V270uF for Motherboard VGA Solid Capacitor
$10.48Electronic Accessories & SuppliesAdd to cartDescriptionLow ESR, high ripple current capabilityESR 5mΩ max (2 to 4VDC)Longer life(20000 hours at 106 Celsius)Rated voltage:2 to 16VDCCategory temperature:-55 to +105 CelsiusTolerance:+/-20%(M)Package included30 x Solid Capacitors
Reviews
There are no reviews yet.