3Pcs DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Module name:400W boost constant current module
Module nature:non-isolated boost module (BOOST)
Input voltage:DC8.5V-50V
Input current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipation
Static working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)
Output voltage:10-60V continuously adjustable (suitable for applications where the input voltage is lower than the output voltage and cannot be stepped down.)
Output current:12A MAX exceeds 7A or the module temperature exceeds 65 degrees, please strengthen heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)
Constant current range:0.2-12A
Maximum output power:= input voltage*10A, such as:input 12V*5A=60W, input 24V*5A=120W,
Input 36V*5A=180W, input 48V*5A=240W,
Working frequency:150KHz
Conversion efficiency:96% typical (efficiency is related to input, output voltage, current, and pressure difference)
Overcurrent protection:Yes (when the input exceeds 15A, the output voltage will be automatically reduced with a certain range of error.)
Installation method:4 2.5mm screw holes
Wiring mode:terminal block
Module size:length 67mm width 48mm height 28mm
Module net weight:about 65 grams
Output voltage/current adjustment method
1. Adjust the output voltage potentiometer (increase the voltage counterclockwise and decrease the voltage clockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V. (Turn the voltage up counterclockwise and turn down the voltage clockwise)
2. Adjust the output current potentiometer clockwise about 30 turns, set the output current to the minimum, connect the LED, and adjust the current potentiometer to the current you need. For battery charging, after the battery is discharged, it is connected to the output to adjust the current. (When used for charging, the discharged battery must be used for adjustment, because the more battery remaining in the battery, the lower the charging current .) (turn down clockwise current, turn up anticlockwise current)
Note
Please do not use short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.
Application range
1. DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. As a vehicle power supply, it can supply power to your laptop, PDA or various digital products.
4. DIY a high-power notebook mobile power supply:equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.
5. The solar panel voltage stabilizes.
6. Charging batteries, lithium batteries, etc.
7. Drive high-power LED lights.
Package included
3 x Power Supply Module
Weight | 0.24 kg |
---|
Customers Also Viewed
3 x 100pcs RM065 Horizontal Trimpot Potentiometer Assortment Kit with Storage Box
$33.28Electronic Accessories & SuppliesAdd to cartSpecificationsModel Number:RM065Operating Temperature:-5 °C to +70 °CTechnology:Carbon FilmType:Trimming PotentiometerRated Power:0.1WResistance Tolerance:±20%Max. Operating Voltage:50VResistance:100 ohm-1M ohm (Variable Resistor)Package included3 x 100pcs 10 Values RM065 Horizontal Trimpot Potentiometer Assortment Kit
ICE-Tower CPU Cooling Fan V2.0 Super Heat Dissipation Different Colors LEDs for Raspberry Pi 3B+/4B
$46.37Raspberry Pi & Orange PiAdd to cartDescriptions1. According to Moore’s law, the design of high-speed and high-density printed circuit board (PCB) is becoming more and more complex.2. Higher processing performance will generate more heat. 3. This super ICE Tower CPU Cooling Fan for Raspberry Pi is burned for solving heat dissipation problem! 4. Tower structure, 5mm copper tube, multi-layer heat sinks, …
20pcs WITRN-CC001 TYPE-C Male to Female Connector TYPE-C Adapter Board Test Fixture Module
$201.72Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesAll interfaces of TYPE-C adapter board are led out, all interfaces are independent, which is convenient for TYPE-C development and debugging.Package Included20 x WITRN-CC001 TYPE-C Adapter Board
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyC
$34.70Other Module BoardAdd to cartDescriptionSG90 servo is a M5Stack custom 9g servo.The angle of rotation is 0°~180°,it can be used with 8Servos HAT and PuppyC.This small servo is very easy to use for beginners. You don’t have to use a dedicated drive board with feedback control,Any common servo driver and microcontroller can easily turn it up.Compared to driving a …
3pcs M5Stack SG90 Servo 9G SERVO Plastic Teeth Work with 8Servos HAT and PuppyCRead More
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 Heads
$87.06Switch AccessoriesAdd to cartFeatures1. Perfect Multiple Cleaning Tasks — Automatic cleaning scrubber can be used indoor and outdoor, it’s great for curves, tile, sink bowls, toilets, bathtub, door slots, shower windows, it also cleans car tires and mags well.2. Harsh and Abrasive Cleaners — Our flexible bristles mold into cracks and crevices, corners, and shower tracks for a …
Wireless Electric 360 Spin Cleaning Brush Floor Kitchen Household Brush +5 HeadsRead More
Reviews
There are no reviews yet.