DC-DC 15A Adjustable Boost Converter Constant Current Power Supply Module Car Charging Transformer LED Driver
$12.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Module name:400W boost constant current module
Module nature:non-isolated boost module (BOOST)
Input voltage:DC8.5V-50V
Input current:15A (MAX) over 8A or module temperature over 65 degrees, please strengthen heat dissipation
Static working current:about 10mA (measured when 12V rises to 20V, the higher the output voltage, the higher the quiescent current will increase)
Output voltage:10-60V continuously adjustable (suitable for applications where the input voltage is lower than the output voltage and cannot be stepped down.)
Output current:12A MAX exceeds 7A or the module temperature exceeds 65 degrees, please strengthen heat dissipation (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)
Constant current range:0.2-12A
Maximum output power:= input voltage*10A, such as:input 12V*5A=60W, input 24V*5A=120W,
Input 36V*5A=180W, input 48V*5A=240W,
Working frequency:150KHz
Conversion efficiency:96% typical (efficiency is related to input, output voltage, current, and pressure difference)
Overcurrent protection:Yes (when the input exceeds 15A, the output voltage will be automatically reduced with a certain range of error.)
Installation method:4 2.5mm screw holes
Wiring mode:terminal block
Module size:length 67mm width 48mm height 28mm
Module net weight:about 65 grams
Output voltage/current adjustment method
1. Adjust the output voltage potentiometer (increase the voltage counterclockwise and decrease the voltage clockwise), according to your load requirements, set the output voltage to the voltage value you need. For example, the voltage of 10 LED strings is adjusted to 37V. (Turn the voltage up counterclockwise and turn down the voltage clockwise)
2. Adjust the output current potentiometer clockwise about 30 turns, set the output current to the minimum, connect the LED, and adjust the current potentiometer to the current you need. For battery charging, after the battery is discharged, it is connected to the output to adjust the current. (When used for charging, the discharged battery must be used for adjustment, because the more battery remaining in the battery, the lower the charging current .) (turn down clockwise current, turn up anticlockwise current)
Note
Please do not use short circuit to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.
Application range
1. DIY a regulated power supply, input 12V, output can be adjusted from 12-50V.
2. To supply power to your electronic equipment, you can set the output value according to your system voltage.
3. As a vehicle power supply, it can supply power to your laptop, PDA or various digital products.
4. DIY a high-power notebook mobile power supply:equipped with a large-capacity 12V lithium battery pack, so that your books can be bright wherever you go.
5. The solar panel voltage stabilizes.
6. Charging batteries, lithium batteries, etc.
7. Drive high-power LED lights.
Package included
1 x Power Supply Module
Weight | 0.08 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.