3pcs DC-DC 8.5-48V To 10-50V 250W Continuous Adjustable High Power Boost Power Module Step Up Board
$39.45
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Module name:250W boost static current module
Module properties:non-isolation boost module (BOOST)
Input voltage:DC 8.5-48V
Input current:10A (MAX), if exceeds 8A, please strengthen the heat dissipation
Static working current:10mA (12V up 20V, the higher the output voltage is, the higher the static current will increase)
Output voltage:10-50V continuous adjustable if necessary (default output 19V delivery)
Output current:10A MAX, if over 6A please strengthen heat dissipation. (Related to the input and output voltage difference, the larger the voltage difference is, the smaller the output current is)
Constant current range:0.2-8A
Output power = input voltage * 10A, for example:input 12V * 5A= 60W, input 24V * 5A = 120W, input 36V * 5A = 180W, input 48V * 5A= 240W
If you need more power, you can use two modules in parallel, such as the output of 10A, which can be connected in parallel with two modules, transfer the current of each module to 5A.
Working temperature:-40 – +85→ (please strengthen the heat dissipation when the ambient temperature is too high)
Work frequency:150KHz
Conversion efficiency:maximum 96% (efficiency is related to input/output voltage, current, voltage difference)
Over-current protection:yes (if more than 13A, it will automatic reduce the output voltage, a certain range of errors)
Input reverse connection protection:yes, (less than 5A if you need more reverse connection current in the input string)
Install mode:4 3mm screw holes
Connection mode:wiring output
Module size:69 x 35mm
The adjustment method of output voltage/current
1. Adjust the RV1 potentiometer according to your battery or LED, set the output voltage you need. For example, 10 series of LED voltage adjust 37V.
2. Turn the RV2 potentiometer around 30 times clockwise, and set the the minimum output current, connect the LED, and adjust the RV2 potentiometer to set the current you need.
Note:please do not adjust the current in the short circuit, the circuit structure of the boost module cannot be adjusted in the short circuit.
Application scope
1. Make a stable power supply, input 12V, and output can be adjustable 12-50v.
2. Power supply for your electronic equipment, can set output value according to your system voltage.
3. Power supply for your laptop, PDA or various digital products as the on-board power supply.
4. DIY a large power laptop mobile power supply with a large lithium battery pack of 12V capacity, let your laptop go wherever it goes.
5. Stabilized solar panels.
6. Charge battery, lithium battery, etc.
7. Drive high-power LED lights.
Package included
3 x Boost power module
Weight | 0.192 kg |
---|
Customers Also Viewed
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubator
$56.69Switch AccessoriesAdd to cartFeatures– Made of high quality ABS material, insulating, stable and durable.– LED lamp head, high power, strong light source, can clearly detect the hatching of eggs.– Using high-quality materials, safe and durable, with buttons that are easy to open and close.– Suitable for hatching eggs, but also for children and students to learn the process …
LED Cool Light Egg Candler Tester Ultra Bright Pocket Poultry Egg Lamp incubatorRead More
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle Adjustable
$34.82Other Module BoardAdd to cartProduct Introduction1. Operating Voltage:5-30V,support micro USB 5.0V power supply2. Frequency Range:1Hz~150KHz3. Frequency Precision:2%4. Signal Load Capacity:output current is within 8–30mA5. Output Range:default 5V V-pp (can be changed by external power)6. Ambient Temperature:-30 Celsius ~70 Celsius Application Fields1. As square wave generator to generate square wave for experiment development2. Used to drive steeping motor driver’s square …
5pcs 2 Channel PWM Generator Module Pulse Frequency Duty Cycle AdjustableRead More
3.7V Lithium Battery 4 Paragraph Power indicator Module
$4.36Test & Measuring ModuleAdd to cartDescription1, onboard high precision voltage detection chip and power supply voltage chip2, onboard four power indicator LED lights, three kinds of color display, red, yellow, yellow, green,representing 20%, 50%, 80%, 100% of the battery3, set aside a battery testing interface and two positioning hole4, PCB size:22.2 (mm) x17.2 (mm)Package included1 x 3.7V Lithium Battery 4 …
3.7V Lithium Battery 4 Paragraph Power indicator ModuleRead More
YAHBOOM High-quality T-shape Expansion Board + 40Pin GPIO Flat Rainbow Ribbon Cable for Raspberry 4B/3B+/ZERO/W
$10.21Raspberry Pi & Orange PiAdd to cartDescriptionThis high-quality T-shape expansion board allows you to connect the Raspberry Pi GPIO port for breadboard experiments. We will provide a 40Pin soft cable for you to connect the Raspberry Pi board to the breadboard.FeaturesSpecifically designed for Raspberry Pi 4B/3B, Raspberry Pi 2B, Raspberry Pi 1B+, Raspberry pi 1A+, Raspberry Pi zero W, Raspberry Pi …
10pcs LM3915 10-segment Audio Level indicator Kit Electronic Soldering Training experiment DIY Parts
$33.89DIY Electronic KitsAdd to cartFeatrurePower supply:DC9-12VPCB size:62*27mm1 audio cable is needed. One end is subtracted and connected to the audio input port. The red cable is connected to AUDIO +, the green cable is connected to ADUIO-, and the blue cable is subtracted, do not need to solder.Package included10 x LM3915 10-segment Audio Level Indicator Kit
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 Degree
$55.12Electronic Accessories & SuppliesAdd to cartFeatureColding side posts with the wordsHeating side is emptyRed wire to positive, black wire to the negative, it generate electricity when the temperature difference happenedSpecificationModel:SP1848-27145 Color:whiteLead Length:about 30CMSize:40MM x 40MM x 3.4MM20 degree temperature difference:open-circuit voltage 0.97V, generated current:225MA40 degree temperature difference:open circuit voltage 1.8V, generated current:368MA60 degree temperature difference:open circuit voltage 2.4V, generated current:469MA80 …
10pcs 40x40mm thermoelectric Power Generator Peltier Module TEG High Temperature 150 DegreeRead More
Reviews
There are no reviews yet.