50pcs DC12V 10A 1CH 433MHz Wireless Relay RF Remote Control Switch Receiver Module
$159.00
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
1.Input Voltage:DC10-14V
2.Standby Current
3.RF Frequency:433MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity:>90dBm
6.Remote Control Distance:>100 meter(In open environment)
7.Decoding Way:MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type:Fixed code, learning code
10.Channel:1CH
11.Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage:DC12V
14.Output Current:10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
17.Dimension:3.5cm*3cm*1.6cm
Working/output way
1.Jog:Press the learning button then release, set the mode from the system automatically working mode to action mode, wait for a while, when the board LED off, said it is into the learning state, press the remote control, the system received the signal. The LED flashes 5 times and goes off again. After 3S delay, LED light marked learning success, the system automatically withdraw from the learning state.
2.Self-locking:Press the learning button, then release, press 2 times, the system automatically set to self-locking mode, wait for a while, LED off, it is into the learning state, press the remote control, LED flash 5 times Off. 3S after the delay, LED light learning success.
3.Interlock:press the learning button, then release, press 3 times in succession, the system is set to interlock mode.
4.Delay:Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Description
1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control
the indicator flash 2 times and off .it mean you learn it successfully .
2. it can learn more than 12 PCS 2262 or 1527 chip with the different code wireless 433MHz remote control
3. remove/clean:press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
Package included
50 x 12V 1CH 433MHz Wireless Relay Switch Receiver
Weight | 0.85 kg |
---|
Customers Also Viewed
M5Stack Ultra-Wideband UWB UnM5Stack Ultra-Wideband UWB Unit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Rangeit indoor Positioning Module DW1000 Low Power Consumption for indoor Wireless Tracking Range
$87.06Test & Measuring ModuleAdd to cartDescriptionUWB is a Unit which integrates the UWB(Ultra Wide Band) communication protocol which uses nanosecond pulses to locate objects and define position and orientation. The design uses the Ai-ThinkerBU01 Transceiver module which is based on Decawave’s DW1000 design. The internal STM32 chip with its integrated ranging algorithm,is capable of 10cm positioning accuracy and also supports …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer Device
$36.44Solar CollectorsAdd to cartLED Ultrasonic Dog Repeller Handheld Dog Trainer Device 3 in 1 Anti-barking Stop Bark Dog Deterrent Training ToolsFeaturesUltrasonic design-Adopts ultrasonic technology, make the dogs be quite and can effectively train your dogs to be obedient and stop some unwanted behaviors, protect you from being attacked by unfriend dogs. Multi-function deviceThe dog repeller have 3 functions, …
3 in 1 LED Ultrasonic Anti Barking Pet Dog Train Repeller Control Trainer DeviceRead More
3pcs DC 3.7-7.4V 4A 800-1000KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module
$32.59Electronic Accessories & SuppliesAdd to cartDescriptionInput parameters:3.7-7.4V/4A input, cable length:about 10 cm (red + green -)Output parameter:800-1000KV / 0.5A, cabl length:about 16 cmHigh voltage polarization discharge distance:1.5-2cm (don’t exceed)Size:3.4 x 2.3 x 1.7cmAbout input power:can use 3.7V lithium battery input (such as 18650 battery), 4V or 6V lead acid battery and so on. The input voltage current affects the output …
Semiconductor Chilling Plate Cooling fan Kit TEC1-12706 thermoelectric Peltier Cooler Refrigeration Cooling System
$37.17Module KitsAdd to cartDescriptionAdopt TEC1-12706 semiconductor chilling plate, good quality for use.Complete sealed structure, isolating the moisture in the air.Higher reliability than others.Include TEC1-12706 semiconductor cooler and other accessories, easy to install.Great DIY kit for electronic enthusiasts in semiconductor cooling applications.FeatureSemiconductor Chilling Plate:TEC1-12706Size:40 * 40 * 3.75mmInternal Resistance:2.1~2.4Max. Temperature Difference:67C AboveRated Voltage:12V(Vmax. 15V, Starting Current 5.8A)Working Current:Imax.=4~4.6A(Rated 12V)Refrigeration …
Universal 40-Pin ZIF DIP IC Test Board Socket ZIF IC Socket for DIP IC MCU
$16.19SwitchesAdd to cartFeatureThis is a universal ZIF IC test socket.Great pin contact with a leverIt’s suitable for IC with 40 pinsEasy to remove and to program ICsSpecificationColor:greenMounting Type:Through holePitch:Approx. 0.1inchinch inches (2.54mm)Pin Number:40Type:DIP, ZIFSize(L x W x H):Approx. 65mm x 2.2mm x 1.1mm(L x W x H not include the pins and lever)Package Included1 x IC socket
AUDEW Premium Tire Pressure Gauge 0-100 PSI Heavy Duty & Accurate Air Pressure Tire Gauge for Car SUV Truck Motorcycle Bicycle
$28.34Switch AccessoriesAdd to cartSPECIFICATION-Applicable type:car, truck, motorcycle, bike, etc-Operating Temp:- 20 ℃ ~ + 40 ℃-Range:0-100 psi-Unit of measurement:PSI, BAR-Resolution:0.05 kg/cm-Accuracy:+/-1%+0.5psi(relative humidity Temperature 25 ℃)FEATURES1.More than a tire pressure gauge, also can deflate overinflated tires with a built-in air bleeder valve.2.High accuracy and easy to read with 2 units of measurement.3.Made with premium heavy duty matel materials, sturdy …
Reviews
There are no reviews yet.