5pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$20.68
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
5 x MQ-4 Gas Sensor Module
Weight | 0.035 kg |
---|
Customers Also Viewed
DIY LED Light Lighting Kit for LEGO 42083 Bugatti Chiron Technic Set with Remote
$37.17DIY Electronic KitsAdd to cartUpgrade LED Light Kit With Remote Control For Bugatti Chiron 42083 Technic Advanced Building Light SetFeature100% Brand new.Light Kit will turn your model into a true spectacle and really bring the supercar to life. With front and rear headlights, including our specially developed light bar that stretches across the rear of the vehicle, your model …
DIY LED Light Lighting Kit for LEGO 42083 Bugatti Chiron Technic Set with RemoteRead More
20pcs RobotDyn? DC-DC 0.9-5V to 5V 500mA Converter Step Up Boost USB Module Board
$55.11Boost & Buck ModuleAdd to cartFeatureIt is ultra-small step up booster, converting 0.9V-5V to 5V.Use for charge of smartphones, power supply for circuit boards to 5V, digital products supply.Onboard have terminal block for input and USB-A socket for output 5V.LED (green) power indicator.Technical detailsInput voltage:DC 0.9V ~ 5VOutput voltage:DC 5VOutput current:500mA(max)Conversion efficiency:96% (max)Frequency:1.0MHZPackage includes20 x Converter
AD5593 Converter ADC/DAC Configurable 12-Bit Analog-to-Digital Converter 8 Channel
$34.09Converter BoardAdd to cart>>>Manual:Click here to openSpecificationsADC offset error:±5mVADC conversion time:2usADC full power bandwidth:8.2MHz 3dBDAC offset error:±3mVDAC input full 0 error:2mVReference voltage VREF input:1 ~ VDDReference voltage VREF output:2.5VTemperature sensor accuracy:12 bitsTemperature sensor temperature range:-40 ~ 105 ° CMeasurement error:±3 °CPower supply VDD:2.7 ~ 5VIIC communication frequency:up to 400KHzPin DescriptionVCC:Positive power supplySCL:IIC clock signal lineSDA:IIC data signal lineRES:Chip …
AD5593 Converter ADC/DAC Configurable 12-Bit Analog-to-Digital Converter 8 ChannelRead More
DC 3.7V To 5V 3W Digital Audio Amplifier Board Dual Plate DIY bluetooth Speaker Modification Sound Music Module Micro USB
$10.92Amplifier BoardAdd to cartDescriptionMaterial:electrical componentsOperating voltage:DC 3.7-5VSize:40*20mmPower:3WPackage Included1 x DC 3.7-5V dual plate 3W amplifier board DIY bluetooth speaker modification moduleWiring, for reference only!
YAHBOOM AI-Motion K210 Developer Board Kit to Learn AI Vision Technology RISC-V Face Recognition Camera Deep Learning
$123.00Smart Robot & Solar PanelAdd to cartTutorialYahboom K210 Developer Kit DescriptionAl-Motion K210 Developer Kit is a small full-featured development board kit developed by Yahboom and Canaan. The RISC-V processor structure adopted by K210 is specially designed for machine vision and machine hearing multi-mode shape recognition, it can be widely used in smart home, machine vision, intelligent robots, security monitoring and other …
Aquarium Fish Tank Sand Cleaner Water Changer Cleaning Supply Maintenance Pump
$22.26Electrical Pump & ValveAdd to cartFeatures1. Made of durable plastic, beautiful design, compact structure, easy to use.2. Strong suction and large flow. This cleaner allows you to take the waste in sand away along with water easily.3. Universal. Suitable for fish tank 50-100 gallon.4. Controlling the water flow as needed with water adjuster.5. Unique pressure design allow you to simply …
Aquarium Fish Tank Sand Cleaner Water Changer Cleaning Supply Maintenance PumpRead More
Reviews
There are no reviews yet.