5pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$20.68
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
5 x MQ-4 Gas Sensor Module
Weight | 0.035 kg |
---|
Customers Also Viewed
5Pcs MQ135 MQ-135 Air Quality Sensor Hazardous Gas Detection Module for Detect Ammonia Sulfides Benzene Vapors
$15.90Sensor & Detector ModuleAdd to cartnullOverview1. The gas sensitive material used in the MQ135 gas sensor is tin dioxide (SnO2) with lower conductivity in clean air. When there is a polluting gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of the polluting gas in the air increases. The change in …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
Fuel Pump Holder Mount Rubber for Eberspacher Webasto Heater D2 D4 D5
$20.24Laboratory Heating EquipmentsAdd to cartSpecification1. Material:Rubber+Metal2. Color:Black3. Contains fuel pump holder, mounting bolts, nut and fixing screw.4. High-quility, stable characteristics, high reliability.5. Suitable for Eberspacher Webasto heater D2/D4/D5.Package Included1 x Fuel pump holder Set
20pcs TB293 7W USB DC to DC 5V to 6V 9V 12V 15V Adjustable Output Converter Step Up Boost Module for LED Motor Fan
$88.78Boost & Buck ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionInput voltage:3~6VOutput voltage:6-15.5VMaximum input current:1.4ALong-term work Current:1AConversion efficiency:79-90% Input Interface:USB MaleOuput Interface:2 PIN XH2.54 Power:Maximum 7WWorking frequency:1.0MHzOperating temperature:-40 to +85 →Size:47.5 x 16mmApplications6-15V Low Power Motor6-15V LED LightingHard drive power supply9V 12V …
CBB61 3Pcs 18UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$22.48Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 18UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
42V 2A Adapter Charger for 2 Wheel Smart Self Balance Schooter 36V Li-ion Lithium Battery
$36.44Electrical DC Power SupplyAdd to cartSpecificationsName:Lithium Battery ChargerModel:JC4202Charging battery type:Li-ion Material:Plastic and MetalColor:BlackCharger size:117 x 52 x 33mm(L*W*H)Input voltage:AC100-240VInput voltage range(V):50/60HzOutput voltage(V):DC 42V 2000mAOutput terminal:DC socket, 5.5/2.1mmPolarity:Inside:“+ Inch, Outside:“- InchFeaturesHigh security, retardant. More energy, lower standby power consumption.Universal 6.5inch, 7inch, 8inch, 10inch two-wheel balance car.Two models can not be charged:millet balance car, wheelbarrow.Longer life, widely used in Electronic products,digital products,optical …
42V 2A Adapter Charger for 2 Wheel Smart Self Balance Schooter 36V Li-ion Lithium BatteryRead More
Reviews
There are no reviews yet.