5pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$20.68
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
5 x MQ-4 Gas Sensor Module
Weight | 0.035 kg |
---|
Customers Also Viewed
HS-48B Set 600PCs Cold-pressed Assorted Crimp Terminal Para Fio Combination Plug Spring Boxed Connector Cross Wire Crimping Tool
$18.21Electronic Accessories & SuppliesAdd to cartPackage Included6.3mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female4.8mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female2.8mm:0.5 – 1.0 mm2 / AWG 22-18;50 pieces male and 50 pieces female50 pieces each protective cover for male and …
Geekcreit 315/433MHz DC12V 10A 1CH Single Channel Wireless Relay RF Switch Receiver Board with Case
$17.48Relay ModuleAdd to cartSpecification1. Input Voltage:DC10-14V2. Standby Current3. RF Frequency:315/433MHz (optional)4. RF Working mode:Super heterodyne receiver5. Receiver Sensitivity:>97dBm6. Remote Control Distance:>100 meter(In open environment)7. Decoding Way:MCU Software decoding8. Can store the number of remote control:509. Support remote control type:Fixed code, learning code10. Channel:1CH11. Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)12. Wiring Method:Fixed wiring terminal13. Working Voltage:DC12V14. Output Current:10A15. …
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
offline Version 1610 PRO 3 Axis CNC Router GRBL Control DIY Adjustable Speed Spindle Laser Motor Wood Engraving Milling Machine
$346.06Laser Engraving MachineAdd to cartThe software and instruction please:https://drive.google.com/openid=1JXQbBj-CuYee53yvQESx5HsVRhJ59VTDSpecification:Rated Voltage:24VEngraving area:16x10x4.5cmSpindle:775 spindle motorSoftwear:GRBL control systemssupport system:24V 5.6A adapterStepper motor:fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/MSpindle:775 spindle motor (12-36V) 24V:10000r / minSupported System:Windows XP / Win 7 / Win 8 / Win 10 / Linux.Drill bits:tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.clamps:4 pcs, Hold the thickness of 0-30mm,size:50 …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
$8.13Test & Measuring ModuleAdd to cart3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorFeatures1. As a square wave signal generator,generates a square wave signal used for experimental development.2. Used to drive a stepper motor for generating a square wave drive signal.3. Generate adjustable pulse for MCU.4. Generate adjustable pulse,to control circuitry associated.5. Size:31mm x 22mm6. Main chip:NE5557. …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorRead More
PiFi HIFI DAC+ Digital Audio Card Pinboard for Raspberry Pi 3 Model B /2B/B+/A+
$40.49Raspberry Pi & Orange PiAdd to cartPiFi HIFI DAC+ Digital Audio Card Pinboard For Raspberry Pi 2 Model B / B+ / A+DescripionIt’s suitable for Raspberry pi B+. You can setup a open music player by Volumio systemPackage included1 x Digital Audio Card Pinboard
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip Wire
$123.28Smart Robot & Solar PanelAdd to cart12V 20W 45CM x 35CM PolyCrystalline Solar Panel With Alligator Clip WireFeatures20W 12V PolyCrystalline Cells Solar Panel High efficiency and excellent performanceProvided with 2 alligator clips and 4m cableSuitable for a variety of equipments, emergency lights, advertising lights, traffic lights, electric fans, solar water pumps, motorbike, boat, etc..Power:20WVoltage:12VMaterial:PolyCrystalline Weight:415g Dimensions:45cm x 35cm (LxW)Cable Length:Approx. 4mPackage …
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip WireRead More
CJMCU-231 Pedometer Sensor Module Triaxial Accelerometer KX023-1025 FIFO FILO
$9.68Sensor & Detector ModuleAdd to cartInstructions:http://files.hobbyant.com/2018/06/CJMCU-23-TEST.zipChip FeatureDigital High-Pass Filter OutputsEmbedded FIFO/FILO bufferLow Power Consumption with FlexSet™ Performance OptimizationInternal voltage regulatorEnhanced integrated Directional Tap/Double-TapTM, and Device-orientation AlgorithmsUser-configurable wake-up functionDigital I2C up to 3.4 MHzDigital 3-wire and 4-wire SPI up to 10 MHzLead-free SolderabilityExcellent Temperature PerformanceHigh Shock SurvivabilityFactory Programmed Offset and SensitivitySelf-test FunctionPackage includes1 x Pedometer Sensor Module
Reviews
There are no reviews yet.