3pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$13.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
3 x MQ-4 Gas Sensor Module
Weight | 0.021 kg |
---|
Customers Also Viewed
R103C 6GHz 5.8G Broadband Directional Antenna High Gain ads-b UAV Image Transmission Antenna
$30.90RF amplifierAdd to cartDescriptionThis directional antenna is suitable for directional radio signal transmission and reception signal source reconnaissance lateral, broadband signal testing, etc.The antenna covers the common frequencies of mobile phone communication, UWB positioning module and Wifi and other radio frequency unitsFrequency range:850MHz-6GHzDimensions:22*15CMPolarization method:linear polarizationRated gain:7dbiReturn loss:10DBPower:5WWeight:110gPackage included1 x Broadband Directional Antenna
3Pcs HY-SRF05 Ultrasonic Distance Sensor Module Measuring Sensor Module
$13.93Sensor & Detector ModuleAdd to cart3Pcs HY-SRF05 Ultrasonic Distance Sensor Module Measuring Sensor ModuleDescriptionThis module performance is stable, measure the distance accurately. Module precision, blind spots (2cm) super close.SpecificationInput voltage:5V DCQuiescent currentOutput level(high):5VOutput level(low):0VInduction angleDetection distance:2cm – 450cmAccuracy:up to 0.3cmBlind spots:2cmPackage included3 x HY-SRF05 ultrasonic distance sensor module
AC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810
$48.59RelaysAdd to cartDescriptionAC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810Features1.High strength PC flame retardancy,AC220V copper coil.2.A contactor (motor starter) is a high capacity relay that has built-in auxiliary contact to work with momentary push buttons.3.It is versatile and is often used to control a motor or as a main power switch, sometimes …
AC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810Read More
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
ZL-7903A Multifunctional Automatic Temperature and Humidity incubator Controller XM-18 100-240V AC with with ZL-SHr05J Sensor
$107.15Test & Measuring ModuleAdd to cart>>>Manual:Click here to openFeatureZL-7903A is an industrial intelligent temperature and humidity controller. Optional external SSR to realize bigger heatingpower rate, and with optional temperature PID control. With touch button and big size LCD display, convenient to operate,easy to set up. Applicable for control of incubator, climate chamber, warehouse, and so on.Main Function1. Ventilation fan control2. …
Reviews
There are no reviews yet.