3pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$13.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
3 x MQ-4 Gas Sensor Module
Weight | 0.021 kg |
---|
Customers Also Viewed
20pcs DC-DC Buck Regulator Module 9V/12V/24V to 5V USB Charging Vehicle Power Supply Buck Module
$41.78Power Supply ModuleAdd to cartDescriptionProduct size:35.5*17*8.3mmInput voltage range:6-26VThe output voltage is 5.2V (considering the loss of charging line, the output terminal is about 5.2V, and the load terminal is about 5V).The maximum output current is 3A (without the heat sink, the output current is 2A).Note 1:Positive and negative can not be reversed, and the input voltage should not exceed …
3pcs AT Firmware DT-W5G1 5G WiFi Module 2.4g/5g Dual-band Module with Antenna interface for Wireless Image Transmission
$39.69Smart ModuleAdd to cartDescriptionSOC characteristicsBuilt-in 160MHz MIPS RISC processor512K SRAMCommunication rate:72Mbps (20MHz)Optimal balance & LLR quantificationWi-Fi featuresSupport 802.11 a/b/g/n, 2.4-2.5GHz, 4.9-5.85GHz2.4GHz Rx sensitivity:-75dBm/11n HT20 MCS7, Tx Power:21dBm5GHz Rx sensitivity:-74dBm/11n HT20 MCS7, Tx Power:16.5dBmSupport Station, SoftAP modeSupport Wi-Fi Direct (P2P)Supports CCMP (CBC-MAC, counter mode), TKIP (MIC, RC4), WAPI (SMS4), WEP (RC4), CRCP2P discovery, P2P GO mode/GC mode and P2P …
Geekcreit LCR-T3 LCR-T4 Mega328 Transistor Tester Diode Triode Capacitance ESR Meter Assembled
$34.98Power Supply ModuleAdd to cartSpecificationsResistor:0.1ω-50MωCapacitor:25pF-100000uFInductance:0.01mH – 20HWorking power:DC-9VStandby current:0.02uAOperating current:25mAMaterial:Metal+PlasticSize:about 11.1cm/4.37inchx2.6cm / 1.02inchx8.5cm/3.34inch[Conversion:1cm=0.3937 inch, 1inch=2.54 cm]Description1. Add boot voltage detection function2. Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components3. Automatic test out the pin element and displayed on the LCD4. Can be detected …
1Pair IP68 SP13 6Pin Waterproof Air Plug Socket Panel Mount Wire Cable Connector Aviation Plug
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionProduct Name:13MM Waterproof Aviation ConnectorConnector Type:Plug + SocketPin Quantity:6PINWaterproof Level:IP68Rated Current / Voltage:AC 380V/25AWithstand Voltage:AC 1500VCable Range:4-6.5mmMaterial:Plastic, BrassColor:Blue, Black, Gold TonePackage included1 Pair x 13MM Waterproof Aviation Connector
5Pair IP68 SP13 6Pin Waterproof Air Plug Socket Panel Mount Wire Cable Connector Aviation Plug
$30.28Electronic Accessories & SuppliesAdd to cartDescriptionProduct Name:13MM Waterproof Aviation ConnectorConnector Type:Plug + SocketPin Quantity:6PINWaterproof Level:IP68Rated Current / Voltage:AC 380V/25AWithstand Voltage:AC 1500VCable Range:4-6.5mmMaterial:Plastic, BrassColor:Blue, Black, Gold TonePackage included5 Pair x 13MM Waterproof Aviation Connector
230W 7R DJ Disco Stage Head Light Lamp Moving Beam Ballast Power Supply Module
$45.91Power Supply ModuleAdd to cartTechnical SpecificationsMini size, compact design.sturdy and durable.Easy to use and convenient to operate.Application:Commercial, Engineering, Indoor, Outdoor, Professional, SailingFeatures and BenefitsMaterial:PCBVoltage:110-220VWattage:230WType:7R BallastLength:13cm/5inchPackage Includes1 x Power Supply ModuleNotice1. Please allow 1-3cm error due to manual measurement.Pls make sure you do not mind before you bid.2. The color may have different as the difference display,pls understand.
Emakefun DC5V Gesture Sensor Module with 4PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$15.17Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:4PIN anti-reverse connection Dupont line 12C3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x Gesture Sensor Module(the other items are not includes)
5pcs 5V 0.6A 3W Qi Standard Wireless Charging DIY Coil Receiver Module Circuit Board Wireless Charging Coil for Smart Phone
$40.93Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsOutput:5V 0.6APower:3WCircuit board size:20 x 20 x 1 mmMagnetic shield size:28 x 28 x 0.1 mmCoil size:24 x 8 x 0.5 mmCoil outer diameter:24mmCoil inner diameter:8 mmApplication:Can be used for wireless charging …
Reviews
There are no reviews yet.