3pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$13.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
3 x MQ-4 Gas Sensor Module
Weight | 0.021 kg |
---|
Customers Also Viewed
Food Dehydrator Machine Electric Multi-Tier Preserver Meat/Fruit/Beef/Vegetable Dryer
$147.81ConnectorsAdd to cartFruit Dehydrator 5 Layer Household Vegetable Herb Meat Drying Machine Snacks Small Food Dryer Good Package Air DryerTechnical SpecificationsModel:JZE-R2Color:PinkProduct:Food DehydratorVoltage:220VFrequency:50HzCapacity:5 LayersPower:245WMachine size:215*245*245mm/8.5*9.6*9.6inch ( Height 300mm/11.8inch after raising the shelf) Features and Benefits 5 Interchangeable & Height adjustable trays 35 degrees to 70 degrees, different ingredients, different temperatures, eight-speed adjustmen Transparent trays allow you to check …
Food Dehydrator Machine Electric Multi-Tier Preserver Meat/Fruit/Beef/Vegetable DryerRead More
10Pcs 433Mhz Wireless RF Transmitter and Receiver Module Kit
$22.46Smart ModuleAdd to cartDescriptionThis is 433Mhz RF transmitter with receiver kit for ARM MCU wirelessApplication environmentRemote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote …
10Pcs 433Mhz Wireless RF Transmitter and Receiver Module KitRead More
3pcs Voltage Frequency Converter 0-10V To 0-10KHz Conversion Module 0-10V to 0-10KHZ Frequency Module
$17.50Converter BoardAdd to cartOverviewThe voltage to frequency module LM331_V2F is a module that can generate different frequencies depending on the input voltage. It is capable of converting 0-10V voltage into a frequency pulse signal of 0-10KHz.Features1. Input voltage, output frequency signal.2. The output signal can be fine-tuned, and the potentiometer can be adjusted to calibrate the correspondence between …
Mount in Desk Powered 4 Port USB 3.0 HUB Charging Adapter Cable Organizer
$87.06Switch AccessoriesAdd to cartSpecificationName:4 PortsUSB 3.0 HubModel:XDUH-334Color:BlackMaterial:PlasticSize:69 *24* 60mminch / 2.71inch*0.94inch*2.36inchPower plug:EUplugRated voltage:100V-240VFeature-Support for Windows and Mac operating systems;-The line length is 75CM, which can extend the USB interface from the chassis to the desktop, so you can connect any USB device on the desktop.-Equipped with an external power connector to connect to the power supply-Readable data; rechargeable; …
Mount in Desk Powered 4 Port USB 3.0 HUB Charging Adapter Cable OrganizerRead More
Catda 8GB RAM Raspberry Pi 4B + Cover Box + Power Supply + 32/64GB Memory Card +Micro HDMI DIY Kit
$238.94Raspberry Pi & Orange PiAdd to cartCapacity 32G Plug US Plug / Capacity 64G Plug US Plug / Capacity 32G Plug EU Plug / Capacity 32G Plug UK Plug / Capacity 32G Plug AU Plug / Capacity 64G Plug EU Plug / Capacity 64G Plug UK Plug / Capacity 64G Plug AU Plug /
Car Speaker Amplifier bluetooth 4.1 Audio Receiver Module Modification Accessories Motherboard Stereo
$8.73Amplifier BoardAdd to cartFeatureSupport bluetooth 4.1, support automatic connection back, support WAV+APE+FLAC+MP3 lossless decoding, stereo output.Power Supply:3.7-5VSNR:90dBTHD+N:-70dBCrosstalk:-86dBDNR:91dBSupport:A2DP / AVCTP / AVDTP / AVRCP / HFPLOS:>15MInterface detailsUSB powered:Universal Micro USB 5V powered3.7-5V power supply pad:realize external 3.7-5V lithium battery power supply modificationLED indicator:Bluetooth mode blue light is always on3.5mm stereo audio interface:standard 3.5mm interface, output stereo, can be plugged …
Reviews
There are no reviews yet.