M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
This is without watch accessories,If you like with watch accessories
>>>with watch accessories:Click here to BUY
>>>More M5Stack Item:Click here to open
Description
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features
– 5V DC power supply
– USB Type-C
– ESP32-based
– 4 MByte Flash
– 6- IMU MPU6886
– Red LED
– Buzzer
– IR transmitter
– 1 Buttons, OLED(1.3 inch), 1 Reset
– 2.4G Antenna:Proant 440
– 95 mAh Lipo Battery
– Extendable Socket
– Grove Port
– Wearable & Wall mounted
– Development Platform UIFlow, MicroPython, for
ESP32 Features
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
– Integrated dual mode Bluetooth
– Hall sensor
– 10x capactive touch interface
– 32 kHz crystal oscillator
– PWM/timer input/output available on every GPIO pin
– SDIO master/salve 50MHz
– card interface support
PinMap
RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32:GPIO10:GPIO9:GPIO37:GPIO39
RED LED:LED PIN
IR Transmitter:Transmitter Pin
Button A:Button Pin
Button B:Button Pin
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
ESP32:GPIO15:GPIO13:GPIO23:GPIO18:GPIO5
TFT LCD:TFT_MOSI:TFT_CLK:TFT_DC:TFT_RST:TFT_CS
GROVE PORT
ESP32:GPIO33:GPIO32:5V:GND
GROVE port:SCL:SDA:5V:GND
MIC (SPM1423)
ESP32:GPIO0:GPIO34
MICPHONE:SCL:SDA
6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32:GPIO22:GPIO21
6- posture sensor:SCL:SDA
power management IC:SCL:SDA
Power on / off
Power on:Click the reset button
Shutdown:Double the reset button
datasheet
ESP32-PICO
ST7735S
BM8563
MPU6886
AXP192
SPM1423
Example
Comparision Between Different Development Kits of M5
For details click here
Download chart click here
M5StickC facory test code
M5StickC Vending Machine
Description
PowerC HAT is a charging module specially designed for m5stickc, with built-in ip3005 high-precision lithium battery protection IC and ip5209 power management IC. It uses I2C communication protocol to carry out data transmission with m5stickc of the host computer, and can check the voltage, current and other information through programming. The back battery seat of the module can be installed with two 16340 batteries, which can be charged by the charging module, and can also be used as a charging treasure to provide external power through the battery In addition, the module provides an I2C interface for connecting I2C peripherals, a typec interface for power input, a usb-a bus for power output, with a voltage output of 5V / 1.5A and an input voltage of 5V. The module is equipped with an independent switch, which can be opened once and closed twice.
Product Features
Battery testing
power bank
Battery charger
IIC Address 0x75
Weight & Dimension
Dimension:55mm x 35mm
Weight:19g
Package Included
1 x M5StickC
1 x USB Type-C cable
1 x PowerC HAT(include battery 2 * 750mAh)
Weight | 0.105 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.