3pcs 2CH Channel Optocoupler Isolation Relay Module 5V SCM PLC Signal Amplifier Board
$24.29
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Structural Features
1. Use Hongfa relay, stable and reliable performance;
2. Compatible with two input modes of positive control and negative control;
3. Each channel has an LED action indicator for a more intuitive understanding of product performance;
4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;
5. At the same time, the power supply and the ‘IN’ control terminal are independently controlled;
6. The module adopts the standard ‘DIN’ rail-type installation design, which is convenient and quick to install, firm and stable.
Technical Parameters
1. Trigger signal:DC5V
2. Each trigger signal current:5mA
3. Power supply voltage:DC5V
4. Each coil current:18.8mA
5. Contact type:one normally open and one normally closed (single pole)
6. Maximum load current of each contact:10A
7. Action time:below 12ms
8. Reset time:less than 4ms
9. Maximum switching frequency:18000 times / hour
10. Mechanical life:more than 20 million times
11. Relay installation:plug-in type (No)
12:Module installation method:DIN standard rail installation
Positive control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage
IN1, IN2 are connected to positive voltage control, IN1 controls terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.
Negative control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage
IN1, IN2 are connected to negative voltage control, IN1 controls terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. , K2 means two relays work.
Package includes
3 x Relay board
Weight | 0.258 kg |
---|
Customers Also Viewed
1L Pressure Washer Snow Foam Lance Jet Car Washer for Driveways Roofs Siding Cars
$72.89Solar CollectorsAdd to cartSpecificationsMaterial:Reinforced Nylon,Brass,PEHD(High Density Polyethylene)Color:WhiteCapacity:1LPressure Range:2000 psi – 5000 psiMax.temperature:60℃Size:about 28 x 20 x 8cmFeatures-High pressure water machine body, brass fitting-Easy to use, Perfect for Driveways, Roofs, Siding, Cars, Trucks, SUVs-Save your time and energy-Rinses clean with no residue-Application:Fit For lavor Jet, accessories of pressure washers, for cleaning the car.Package Included1 x Snow Foam Lance
20pcs 3S Lithium Battery Pack Power indicator Board Electric Vehicle Battery Power
$50.94Other Module BoardAdd to cartInstructionsConnect the positive and negative terminals of the display board and connect them to the positive and negative terminals of the tested battery. The digital display shows the real-time battery power.Power parameters3S lithium battery, full charge 12.6VBattery voltage is greater than N X 3.7V, light 3 grid powerThe battery voltage is less than N X …
20pcs 3S Lithium Battery Pack Power indicator Board Electric Vehicle Battery PowerRead More
24mm Exhaust Silencer & 25mm Filter Exhaust and intake Pipe for Air Diesel Heater Accessories
$74.91Laboratory Heating EquipmentsAdd to cartSpecificationModel number:A74487Product name:Air Diesel Heater AccessoryCondition:NewQuantity:1Exhaust PipeColor:SilverMaterial:Stainless steelLength:60cm (before stretch)Diameter:24mmAir Intake PipeColor:BlackMaterial:Aluminum foilLength:50cm (before stretch)Diameter:25mmPackage Included1 x 24mm Exhaust Silencer1 x 25mm Filter1 x 24mm Exhaust Pipe1 x 25mm Air Intake Pipe4 x 25mm Clamps3 x Screws1 x Bracket
DIY Portable Battery Storage Spot Welding Machine PCB Circuit Board with Charge Control Module Welding Spot Welders Pen
$54.66Other Module BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.OverviewEquipped with 3.7-4.2V 5000mA lithium battery, discharge rate up to 70C, output capacity of about 300A, output through MOS tube, this energy is concentrated at the end of the welding pen, through …
Drip Irrigation Kits Plant Watering Kit with Distribution Tubing Hose Irrigation System Automatic Irrigation Set
$56.69SwitchesAdd to cartSpecificationOUTERDO Drip Irrigation Kits is a widely use Irrigation Set, we can use it in automatic watering flowers, plants, vegetables. It supplies the convenience to use a micro irrigation system which precisely customized watering for each plant. It can save your time, water and money. Easy to use, suitable for beginners to learn home gardening.Feature1. …
10pcs LCD1602 LCD Shell for 1602 Blue/Yellow And I2C 1602 Blue/Yellow Green Backlight LCD Module Case
$33.82Electronic Accessories & SuppliesAdd to cartDescription Screen size:2.5 inches Material:acrylic Application 1602 Blue Backlight LCD Display Module:https://www.hobbyant.com/1Pc-1602-Character-LCD-Display-Module-Blue-Backlight-p-978160.htmlrmmds=search 1602 Yellow Backlight LCD Display Module:https://www.hobbyant.com/1Pc-1602-Character-LCD-Display-Module-Yellow-Backlight-For–p-978155.htmlrmmds=search I2C 1602 Blue Backlight LCD Display Module:https://www.hobbyant.com/IIC-I2C-1602-Blue-Backlight-LCD-Display-Module-For–p-950726.htmlrmmds=search I2C 1602 Yellow Green Backlight LCD Display Module:https://www.hobbyant.com/IICI2C-1602-Yellow-Green-Backlight-LCD-Display-Module-For–p-950728.htmlrmmds=search Package included 10 x LCD1602 LCD shell
Reviews
There are no reviews yet.