5pcs XY-P40W 40Wx2 Dual Channel bluetooth 5.0 Stereo Audio Power Digital Amplifier Board DIY Amplifier DC5-24V without Shell
$53.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specifications
Product NameBluetooth stereo audio power amplifier board
Product ModelXY-P40W
Supply voltageDC:5~24V
Bluetooth version5.0
Connect distance15 meters(visible)
Output modestereo
Output power(@1KHz)20W*2 @12V 4┯
30W*2 @16V 4┯
30W*2 @21V 8┯
40W*2 @24V 8┯
Speaker selected(30W~150W)4┯(5~16V supply)
8┯(5~24V supply)
protectionPower reverse protection
Short circuit protection
Thermal protection
NOTE:If supply power is low and output power is big, noise may be caused, turn down the volume and a bigger supply will be better
Operation
Supply the module, the blue LED is on, and it goes into Bluetooth mode;Waiting for pairing after playing the audio tone; Turn on phone Bluetooth,’XY-P40W’will be searched and display; Click the ‘XY-P40W’,it will connect to the board. It connects successfully with an audio tone; After this you can play the music. The power amplifier board will prepare for the next pairing with an audio tone, When the Bluetooth is disconnected.
Note
1. Keep 2 meters away from router to avoid WIFI interference
2. 5~24VDC is recommended; upper than 26V, it will be damaged.
3. Driving 4┯ load, power supply must be under 16V; and driving 8┯ load, supply must be under 24V.
4. The supply current must be 2A at least.
5. The cable connecting speaker with module should be within one meter.
6. ESD protection, please release ESD on your hands before you contact the module.
7. 40W and upper power speakers is recommended.
Fault Check
1. Check the power supply if the LED is not bright.
2. If the LED is on, but Bluetooth device ‘XY-P40W’is not searched, check if the router is in the near, and keep away from the router.
3. The speaker tapped when power on.
Check that the speaker load is so small that the current through the speaker is enough for chip goes into DC protection. Try to lower the supply and restart.
Check that if the power supply is low that cannot drive the speaker. 2A power supply current is ok.
4. Floor noise in speaker when playing
Play another music to verify the noise is not related with music itself.
Replace the speaker to check If the noise is caused by speaker itself.
Replace the power supply to check If the noise is caused by unstable power.
5. It plays intermittently
Check if the temperature of the board is high, and it goes into thermal protection.
Check if the Bluetooth is unstable, adjust the angle between the connected device; And Check if a WIFI source is in the near.
Package Included
5 x XY-P40W bluetooth 5.0 Stereo Audio Power Digital Amplifier Board without Shell(not included remote controller)
Weight | 0.1 kg |
---|
Customers Also Viewed
1pcs AS15-G AS15G TQFP-48 Chip IC
$4.36Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionType:AS15-GQuantity:1Package included1 x AS15-G AS15G QFP48 Chip IC
18W 1PCS Aquarium Filter Aquarium internal Filter Oxygen Submersible Water Pumps for Fish Tank Pond Aquarium Filters
$48.59MathematicsAdd to cartSpecificationsModel:1280FMaterial:ABSFlow 1300 L/H ,Cable length:1.1MMaximum lift:1.2mOxygen tube length:0.34MFit For fish tank:≤80cmColor:As Picture ShowPower Consumption:18WWeight:639gFeatures-Removable filter box, easy to replace the filter material.-Adopt high quality and firm ABS shell, durable, freshwater and sea water are suitable.-Small size, easy to hide, at the same time filtering, oxygen, pumping and other functions.-With biological filtration cotton in the filter …
4 Channels 4-20mA Current Signal Generator Module Board with 12864 Digital LCD Display
$55.43Other Module BoardAdd to cartDescriptionThis module is a multichannel current signal generator that generates 4 channels 4~20mA current signal. The module is simple to use and input data by keystroke operation, and the output signal is updated immediately.FeaturesUse 12864 LCD displayVoltage:15-24VActive output current 0~20mA. Display resolution 0.01mA and control accuracy 0.1mAPolarity protection of input voltageCan analog transmitter outputCompatible for …
4 Channels 4-20mA Current Signal Generator Module Board with 12864 Digital LCD DisplayRead More
20pcs LM393 DC 5V Optoelectronic Sensor PIR Sensor Module with LED instruction Slot Single Signal
$23.96Sensor & Detector ModuleAdd to cartSpecificationsThe distance between PCB two circular hole (point to point center) is 1.5cm, and the aperture is 0.3cm.Slot type optocoupler slot width:10mmMain chip:LM393, slot type optocoupler H2010Working voltage:DC 5VSize:32mm x11mm x 20mmCharacteristic1. There is a signal output indication.2. Single signal output.3. When the object is blocked, the output is high level (LED lights out), and …
DIY Digital Display LED Logic Pen Electronic Kit High and Low Level Test Circuit Soldering Practice Board Kit
$4.36DIY Electronic KitsAdd to cartDescriptionPower supply:DC 4.5-5VBoard size:3.5 * 5.5cmLow-level judgment voltage:0.0-0.4VHigh-level judgment voltage:3.3-5VPackage included1 x DIY Digital Display LED Logic Pen Electronic Kit
Reviews
There are no reviews yet.