5pcs XY-P40W 40Wx2 Dual Channel bluetooth 5.0 Stereo Audio Power Digital Amplifier Board DIY Amplifier DC5-24V without Shell
$53.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specifications
Product NameBluetooth stereo audio power amplifier board
Product ModelXY-P40W
Supply voltageDC:5~24V
Bluetooth version5.0
Connect distance15 meters(visible)
Output modestereo
Output power(@1KHz)20W*2 @12V 4┯
30W*2 @16V 4┯
30W*2 @21V 8┯
40W*2 @24V 8┯
Speaker selected(30W~150W)4┯(5~16V supply)
8┯(5~24V supply)
protectionPower reverse protection
Short circuit protection
Thermal protection
NOTE:If supply power is low and output power is big, noise may be caused, turn down the volume and a bigger supply will be better
Operation
Supply the module, the blue LED is on, and it goes into Bluetooth mode;Waiting for pairing after playing the audio tone; Turn on phone Bluetooth,’XY-P40W’will be searched and display; Click the ‘XY-P40W’,it will connect to the board. It connects successfully with an audio tone; After this you can play the music. The power amplifier board will prepare for the next pairing with an audio tone, When the Bluetooth is disconnected.
Note
1. Keep 2 meters away from router to avoid WIFI interference
2. 5~24VDC is recommended; upper than 26V, it will be damaged.
3. Driving 4┯ load, power supply must be under 16V; and driving 8┯ load, supply must be under 24V.
4. The supply current must be 2A at least.
5. The cable connecting speaker with module should be within one meter.
6. ESD protection, please release ESD on your hands before you contact the module.
7. 40W and upper power speakers is recommended.
Fault Check
1. Check the power supply if the LED is not bright.
2. If the LED is on, but Bluetooth device ‘XY-P40W’is not searched, check if the router is in the near, and keep away from the router.
3. The speaker tapped when power on.
Check that the speaker load is so small that the current through the speaker is enough for chip goes into DC protection. Try to lower the supply and restart.
Check that if the power supply is low that cannot drive the speaker. 2A power supply current is ok.
4. Floor noise in speaker when playing
Play another music to verify the noise is not related with music itself.
Replace the speaker to check If the noise is caused by speaker itself.
Replace the power supply to check If the noise is caused by unstable power.
5. It plays intermittently
Check if the temperature of the board is high, and it goes into thermal protection.
Check if the Bluetooth is unstable, adjust the angle between the connected device; And Check if a WIFI source is in the near.
Package Included
5 x XY-P40W bluetooth 5.0 Stereo Audio Power Digital Amplifier Board without Shell(not included remote controller)
Weight | 0.1 kg |
---|
Customers Also Viewed
DIY AC100-240V 10A Smart Home Breaker Remote Control Switch Module Support ALEXA Voice Control
$21.86Smart ModuleAdd to cartParametersInput:AC 100-240V 50/60Hzmax output:10Aoutput:AC 100-240V 50/60Hzstandby mode:0.3Woperation temp:-30~70°CFunctionsupport ALEXA voice control, APP voice controlAPP remote controlon / off statusAPP setup timer, delay switchShare config with others memberseach APP support 150 smart-home deviceSupport French, Simplified Chinese, Traditional Chinese, English, Spanish, ArabicCaution1. Please follow user guide installation2. Please keep environment without wireless frequency when it is in …
3pcs Green ST16VD 22mm Hole Size 6-100 VDC Digital Voltmeter Round Voltage Detector Tester Mini LED Voltage indicator Signal Light Monitor
$12.23Electronic Accessories & SuppliesAdd to cartDescriptionDisplay type:digital onlyMaterial:Electrical ComponentsColor:Green22 mm Digital DisplayRated Frequnency:50/60 HzMeasuring Range:6-100 V DCRated Power:0.5WMechanical life:1 million timesElectrical life:500000 timesSize:2.8*5cm /1.10inch*1.97inch (D*H)Accuracy Class:highNotePlease allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid .Due to the difference between different monitors,the picture may not reflect the actual color of the item.Package included3 …
110-250V 10A Travel Universal Adapter Plug Socket Power Adapter
$22.26SwitchesAdd to cartSpecificationsPower input:100-250VCurrent:10AMaterial:ABS PlasticColor:WhiteSize:74mm*50mm*39mm(approx.)FeaturesThis item with fit the plugs in Europe/UK/USA/China/Japan/Australia/Spain and alomost every country in th world.This universal adaptor is a compact one piece unit with 4 international adpators,and provides a child protection safety shutter,power indicator light and surge protector.Tips-This unit does not convert voltage.-Keep this away from children.-Make sure your hands are dry before …
110-250V 10A Travel Universal Adapter Plug Socket Power AdapterRead More
20pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$38.52Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued20 x …
20pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
Periscope Model Laboratory Detachable Optical Reflection School Teaching Physics Experiment
$32.39PhysicsAdd to cartFeaturesLearning PointReflection principle of lightRectilinear propagation of light– Physical optical reflection teaching tools.– 360° Rotatable lens, quick detachable, expandable. – Train your children observation capability, thinking and analytical skills.Package Included1 x Periscope Model
USB LED Light Lighting Kit ONLY for Lego 42056 911 GT3 RS Bricks Toys
$19.67DIY Electronic KitsAdd to cartDescriptionThe Product Is Just a Light Kit, Not Included The Model!!!Interface:USBColor:As the picture shownFitmentONLY For Lego 42056 911 GT3 RS Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
Reviews
There are no reviews yet.