XH-A374 50Wx4 4 Channel TDA7850 bluetooth 4.0 Channel HIFI Auido Power Amplifier Class-AB 4 Channels Amplifier Board for Home Car Audio
$37.17
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specifications
Power amplifier chip:TDA7850
Chip type:Class AB (A and B)
Working voltage:DC 12-14.4V
Standby current
Number of channels:4 channels (Stereo * 2 + stereo * 2)
Output power:50W*2+50W*2(4ohm)
Signal to noise ratio:88%
Size:126 x 95 x 29 mm
Installation hole distance:118×87 mm
Q&A
1. Bluetooth connection problem
Answer:The Bluetooth indicator flashes regularly when it is working normally. If it is on or off, it may be a problem with the Bluetooth module. You can contact customer service to handle it.
2. The mobile phone can be connected but the laptop or desktop cannot be connected
Answer:If the mobile phone can connect and play music, it means there is no problem with the Bluetooth amplifier board. It may be a problem with the Bluetooth driver of the computer. The version is too old or there are files missing. It is recommended to uninstall and then install the latest version of the driver.
3. When the volume is turned up, the sound appears to be stuck, intermittently, and can be played for a long time after the volume is turned down
Answer:Reason one:Because the power of the power supply is too small, the total output power of this power amplifier board is 200W. The recommended voltage for power supply selection is 12V and the current is above 18A.
Reason 2:If the power supply is okay, it may be that the power of the speaker is too small, such as outputting 200W, but connecting a 5W speaker. When the volume is turned up, there will be a stuck phenomenon, and the speaker may be burned.
4. There is too much noise when playing music, or there is noise when not playing music
Answer:The function of the power amplifier board is signal amplification. The main source of noise is the radio clutter in the environment that is amplified by the power amplifier board. Therefore, as long as the power amplifier board will have noise, it is recommended to select the audio cable with shielding function as much as possible It may be that the sound source is noisy, and normal mobile phones and MP3s will not. Most of them are on some old pre-boards, which are not compatible with our power amplifier board. You can add audio isolators or couple capacitors to test. See if you can Cannot be removed.
Package Incldued
1 x XH-A374 50Wx4 4 Channel bluetooth HIFI Auido Power Amplifier
Weight | 0.533 kg |
---|
Customers Also Viewed
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 Mesh
$13.35Mesh & Wire ClothAdd to cartDescriptionStainless Steel 304 Woven Wire Cloth Screen is widely used in acid and alkali environment screening andfiltration, barbecue nets, handicraft nets, food machinery nets, cooking nets.SpecificationMaterial:Stainless steelSize:15x15cm(6inchx6inch)Mesh:60ApplicationWidely used in acid and alkali environment screening and filtration, barbecue nets, handicraft nets, foodmachinery nets, cooking nets, can also be used for solid material classification filtering, liquid and …
15x15cm Woven Wire Cloth Screen Stainless Steel 304 60 MeshRead More
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier Board
$47.10Amplifier BoardAdd to cartDetails1. The Bluetooth core uses QCC3003 chip, supports A2DP, AVRCP, HFP, AAC, I2S, etc., and uses 16M SPI FLASH memory chip. DAC adopts imported PCM51022. The electrolytic capacitor adopts the gold word SANYO 470UF/16V electrolytic capacitor to ensure strong and continuous power support.3. High-precision chip resistors are selected for the resistors to ensure a good …
YJ-QCC3003 Bluetooth 5.0 Module for Power Amplifier BoardRead More
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM IC
$23.68Electronic Accessories & SuppliesAdd to cart10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROMFeatureSuitable for microprocessor systems requiring large data or program storage.It is organised as 2 M Words of 16 bit. The pin-out is compatible with a 32 Mbit Mask ROM.The FDIP42W has a transparent lid which allows the user to expose the chip to ultraviolet light to erase the …
10Pcs Orinigal M27C322-100F1 DIP-42 Mbit 32M EPROMs EPROM ICRead More
120pcs 2.8 4.8 6.3 insert Plug Spring Sheathed Wire Terminal Connector Cold Pressed Terminal 0.5-2.5mm2 Connector
$7.32Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionName:2.8mm Spring ConnectorsMode:DJ622-2.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:4.8mm Spring ConnectorsMode:DJ622-4.8Applied Wire Diameter:0.5-0.8mm2Material:Brass tinned(Sheath:flame retardant material)Usage:All the device switch,rocker switches,vehicles,battery and domesticuse.Name:6.3mm Spring ConnectorsMode:DJ622-6.3Applied Wire Diameter:1.0-1.5mm2Material:Brass tinned(Sheath:flame …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2A
$18.21Relay ModuleAdd to cartSpecificationInput Power Supply:12V DC Load Voltage:AC240V 2AMaximum operating current:13.8mATrigger mode:low levelInput control signal voltage(0-2.5V low state relay OFF)(3.3-5V state high relay ON)Blue KF301 terminal connection control line is more convenient.Module interfaceDC +:positive power supply (by relay voltage power supply)DC-:connect power negativeCH:Relay Module signal triggering end (Low level trigger effective)Note:Power must be DC voltage and need …
5pcs 1 Channel DC 12V Relay Module Solid State Low Level Trigger 240V2ARead More
Geekcreit ESP32 WiFi+bluetooth Development Board Ultra-Low Power Consumption Dual Cores Pins Unsoldered
$15.30Smart ModuleAdd to cartDescriptionESP32 is already integrated antenna and RF balun, power amplifier, low-noise amplifiers, filters, and power management module.The entire solution takes up the least amount of printed circuit board area.This board is used with 2.4 GHz dual-mode Wi-Fi and bluetooth chips by TSMC 40nm low power technology,power and RF properties best, which is safe, reliable, and …
RF Envelope Detector Amplitude Detection Discharge Signal Detection Module
$19.67RF amplifierAdd to cartDescriptionThis product uses a voltage doubler detector (consisting of two reverse microwave diodes), 1 time sensitive than single-tube detector(about 6dB),high sensitivity (typical -30dBm, or even to -40dBm) not ordinary 2AP9,1N60 can emulate.The envelope detection principleFeature1. Maximum input:20dBm2. Detection output:The default is positive3. Working Frequency:0.1-3200MHz4. RC Filter:R = 10K, C = 1nF; (two elements in parallel …
RF Envelope Detector Amplitude Detection Discharge Signal Detection ModuleRead More
ZPHS01 All-in-one Gas Detection Module Carbon Dioxide Dust PM2.5 Sensor PM2.5 + CO2 + VOC + Temperature + Humidity Detector
$129.99Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.NoteThis is PM2.5 + CO2 + VOC + Temperature + Humidity PM2.5 + CO2 + CH2O + Temperature + Humidity ID:1680902OverviewThis is an all-in-one module integrating VOC sensor, laser dust sensor, infrared …
Reviews
There are no reviews yet.