DC12V/24V Delay Timer infinite Loop Delay Module Double Digital Display Time Relay Board 0~999 hr/min/sec
$15.30
Voltage 12V / Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Parameters
Product name:Digital time-delay relay
Product specifications:Display panel:79*43mm; Installation:71*40*24mm
Power supply:DC 24V
Timing range:0 ~ 999S/ 0 ~ 999M/ 0 ~ 999H
Functions:Timing, Delaying, Circulation, etc, 18 functions
Max. Power:Max. working current is 10A, max. power is 1500W
Using Instruction
WARM TIPS:Please wait 6 seconds after finishing setting the data. The data set will be stored automatically after 6 seconds.
Short press SET button once, then enter into time setting mode. When the red digital tube flashes, press ∧button or ∨button to adjust the time of the timing T1. When you finish the setting of T1, short press SET button again. When the green digital tube flashes, press ∧button or ∨button to adjust the time of the timing T2. When you finish the setting of T2, short press SET button again. Then the system will store the setting automatically in 6 seconds, please wait 6 second after finishing setting.
Long press SET button, then enter into parameters setting mode. There are two groups of parameters for the users to choose, P0, P1. In the current mode, short pressing SET button can switch the parameter groups between P0 and P1. In each mode, you can press ∧button or ∨button to adjust the working mode you need.
Mode
P0-0:The timing mode of T1 is second.
P0-1:The timing mode of T1 is minute.
P0-2:The timing mode of T1 is hour
P1-0:After T1 time delay, the relay pulls in.(T1 timing)
P1-1:After T1 time delay, the relay releases.(T1 timing)
P1-2:After T1 time delay, the relay pulls in (T1 timing). Then after T2 time delay, the relay releases (T2 timing).
P1-3:After T1 time delay, the relay releases (T1 timing). Then after T2 time delay, the relay pulls in (T2 timing).
P1-4:After T1 time delay, the relay pulls in (T1 timing). Then after T2 time delay, the relay releases (T2 timing) and repeat the cycle.
P1-5:After T1 time delay, the relay releases (T1 timing). Then after T2 time delay, the relay pulls in (T2 timing) and repeat the cycle.
e.g.:someone need to turn on after 10 seconds, then turn off after 20 seconds and repeat the cycle.
The setting method is as following
T1 is set to 10 and T2 is set to 20
Choose P0-0 (The timing mode of T1 is second.)
Choose P1-5 (The working mode of the relay is working firstly then stopping working and then repeating the cycle)
Product Functions
Function 1:This product can be used in timing, delaying, cycle timing, intermittent timing, etc.
Function 2:This product can be used in raft fishing machine, slow-down machine DIY.
Function 3:This product can be used in timing switch machine, timing alarm control board.
Package includes
1 x Digital time-delay relay
Weight | 0.03 kg |
---|
Customers Also Viewed
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game Toys
$16.19MathematicsAdd to cartSpecificationMaterial:PlasticColor:Random ColorWeight:90gCube:(L*W*H) approx 4*4*4cm/ 1.57*1.57*1.57 inchCylinder A:(Dia*H) approx 3*3*6cm/ 1.18*1.18*2.36 inchCone:(Dia*H) approx 3*3*5cm/ 1.18*1.18*1.96 inchSphere:(Dia) approx 3cm/ 1.18 inchFeatures1.Shapes including cubes, cylinders, pyramid, sphere, cone, and various Cross-sections model.2.Cross-section of Geometric Solids Experiment set, kids math geometry manipulatives.3.Explore shape, size, pattern, volume and measurement with these invaluable hands-on tools.4.Opened and clear plastic geometric solids, easily …
Cross-Section of Geometric Solids Exploring Geometry Manipulatives Mathematics Game ToysRead More
2Pcs 20W 16V 1.25A Monocrystalline Silicon Rear Junction Box Solar Panel + 4 x Spring + Cables
$107.51Smart Robot & Solar PanelAdd to cartFeatures– The two pieces of the product are connected in parallel. Spring connection, support multiple pieces of DIY parallel connection. Mounting holes are provided on each solar panel.– Suitable for 12V batteries. Support 12V output, suitable for 12V battery charging.– High efficiency, conversion rate of 19-20%– Flexible, suitable for surface mountingSpecificationsType:Flexible solar panelMaterial:Monocrystalline siliconExpand:420*385*2.5mmFolding:420x190x2.5mmWorking temperature:-40° …
3pcs D1 Mini Lite V1.0.0 WIFI internet of Things Development Board Based ESP8285 1MB FLASH
$23.13Smart ModuleAdd to cartFeatures11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except D0)1 analog input(3.2V max input)a Micro USB connectionCompatible with 1MB Flash500mA resettable fusePackage included3 x WEMOS D1 mini Lite3 x 2pcs Normal pin
3pcs 315MHZ Wireless Transmitter Receiving Module ASK DC 9V-12V EV1527 Remote Control Switch Board
$11.69Smart ModuleAdd to cartTechnical requestProduct model:ZF-2 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:8~10mACoding type:learning code (EV1527)Radiated power:10~15mWShooting distance:100-200 meters (receiver sensitivity -108dBm)Volume:26.3mm*23.3mm*9mmPIN:NAME:Function1:ANT:RF signal input pin, this pin needs to be connected to the antenna2:12V-:DC power supply negative input pin3:12V+:DC power supply positive input pinRated parameter:Symbol:ValueDC power supply:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes3 x Receiving …
5Pcs Geekcreit ESP8266 ESP-01 ESP-01S WS2812 RGB LED Lamp Module Support for IDE Programming
$11.37Expansion Board & ShieldAdd to cartFeatureThis is a WS2812 RGB LED control module based on ESP-01 / 01S. With it, you can easily control the WS2812 light bar / light ring. DIY own lighting control system. Support for Ard uino IDE programming.Characteristic* Master:ESP-01 / ESP-01S (This module does not include ESP-01 / ESP-01S)* Control Pin:GPIO2* Interface:3Pin PH2.0 connector* Operating Voltage:DC …
DD30CRTA 3A 12V 1-1000AH Lead-Acid Battery Accumulator Storage Cell Charger Charging for UPS Car Solar Motorcycles Electric Vehicles
$15.30Power Supply ModuleAdd to cartSpecificationsPower supply voltage:15-28VDC(Recommended 16-25VDC)Over Charge Voltage is 14.8VFloat Charge Voltage is 13.55VMaximum charge current:3AQuiescent current:about 1.8mAHigh PWM Switching Frequency:300KHzOperating Ambient Temperature:-40→ to +85→Size:66 x 20x 12mmWeight:9gApplicationsCar battery chargingSolar battery chargingMobile LoadspeakerLead-Acid Battery ChargerElectric Bicycle ChargerUPS Portable Industrial and Medical EquipmentStandalone Battery ChargersFeaturesFixed Over-Charge VoltageOvercurrent protectionAutomatic Conditioning of Deeply Discharged BatteriesAutomatic RechargeCharger Status IndicationBattery Overvoltage ProtectionSuitable …
Reviews
There are no reviews yet.