Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
5Pcs Aluminum Alloy Heatsink Cooling Pad for High Power LED IC Chip Cooler Radiator Heat Sink 69*69*37mm
$48.03Module ComponentsAdd to cartSpecificationMaterial:Aluminum 6063-T5Processing method:machine sawingNumber of gears:24Size:69*69*37mmlength:69mmUsed for IC ,Diode, Dynatron ,Electronic ,LED,RAM,CHIP computer’s component heat dissipation, or anywhere you need a small efficient heatsink.Package Included5 x Aluminum Alloy Heatsink
5Pcs 1002 HIFI 2x100W TPA3116 AUX+ bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater
$125.01Amplifier BoardAdd to cartThis is 1002 HIFI ,If you need other parameters, please click ID to buy.502C HIFI ID:1582750502L MINI ID:16526301002L MINI ID:1652631SpecificationsFeatures– This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.– TPA3116D2 is a type D amplifier IC launched by TI …
5Pcs STK4132 50W+50W DX-0408 2.0 Channel STK Thick Film Series Amplifier board 10HZ-20KHZ
$106.46Amplifier BoardAdd to cartFeatureModel:STK4132 (4102/4122/4132/4152/4172/4162/4182 Random delivery)Working voltage:double AC15-18VOutput power:50W + 50WOp Amp Type:4558Frequency response:10HZ-20KHZWeight:194g(1pcs)Size:13 x 10 x 6cmPackage includes5 x Amplifier board
21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test Breadboard
$15.86Electronic Accessories & SuppliesAdd to cart21pcs 7colors ZY-25 Mini Solderless PCB Circuit Test BreadboardDescriptionUsage:experiment, testing and robot.Color:Yellow, white, cyan, red, blue, green, blackSpecificationSize dimension:20mm x 15mm x 12mmMode:ZY-25Number of hole:25Single sideInsulating material:ABS plasticThickness of insulating layer:generalReinforcing material:composite materialFeatureIt can be recycled and recycling.It is easy to use this breadboardYou can piece the breadboard together in fixed unitPackage included21 x Breadboard
10ml Continuous injection Self Refill Vaccinator Poultry Syringe
$48.59Lab ChemicalsAdd to cartDescription10ml Continuous Injection Syringe is mainly used for small animals to the prevention and treatment of disease.SpecificationMaterial:PlasticSize:As shownColor:YellowFeatures Easy to use gun suitable for all drench types both oral and pour on. Rotary adjustment switch function. Infinitely adjustable dose from 0.5ml to 10ml. Unbreakable barrel for long life.Package Included1 x 0.5-10ml Continuous Drench Gun1 x …
10ml Continuous injection Self Refill Vaccinator Poultry SyringeRead More
Robotdyn RFID Reader Writer NFC Module MFRC522 Board
$17.13Card ReaderAdd to cartFeatureThis RFID module base on MFRC522 IC and that can read and write Mifare’s tags. The microcontroller and card reader uses SPI for communication. The card reader and the tags communicate using a 13.56MHz electromagnetic field. The RFID MFRC522 module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags. The RFID MFRC522 module supports contactless communication and uses …
Robotdyn RFID Reader Writer NFC Module MFRC522 BoardRead More
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5V
$25.39DIY Electronic KitsAdd to cartIntroduction to the circuit principleIC2:CD4060 is a 14-stage two-way counter with oscillator, R1, R2, RP1, C1 and IC2 9,10,11 feet circuit composed of the oscillator, the oscillation frequency can be adjusted by the RP1.Transistor Q1, Q2, Q3 play a driving role, D1, D2, D3 play a role in the cycle of reset. IC2 Q5, Q6, …
5Pcs DIY CD4060 Music LED Light Kit Electronic Training DC 3V-5VRead More
Reviews
There are no reviews yet.