Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
5pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$17.37Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
MTOLASER 100mW 405nm Blue-violet Dot Laser Module Generator Variable Focus industrial Marking Position Alignment Diode Generator
$71.59Laser ModuleAdd to cartDescriptionThis variable focus 100mW 405nm Blue-violet dot laser module employs qualified 405nm red laser diode, generates the stable and reliable blue-violet laser dot applicable for various industrial alignments and positioning work. Compact size, easy to install, multi-angle adjustment of installation, easy to operate.SpecificationBrand:MTOLASERLaser Power:100mWWavelength:405nmBeam Shape:Dot Variable Focus:YESOutput Light:Visible LightWorking Voltage:DC 5VWorking Current:30-210mAOptics:Focus Lens Shell Material:Aviation …
DIY WiFi(APP Version) bluetooth Colorful Canton Tower LED Lighting Cube Music Spectrum Electronic Kit
$52.47DIY Electronic KitsAdd to cartDescription1. Offline animation increased to 20 species, 4 +1 spectrum modes, each animation has been carefully designed and debugged,the effect is very brilliant.2. The WiFi module and bluetooth module after careful PCB design and debugging, straight line transmission distance up to 10-20 meters.3. Phone bluetooth connection, available phone with the sound playback music. After using …
10pcs CJMCU-4599 Si4599 N and P Channel 40V (D -S) MOSFET Expansion Board Module
$24.37Expansion Board & ShieldAdd to cartFeaturesHalogen-freeTrenchFET power MOSFET100% UIS TestedApplicationsBackling inverter for LCD displayFull bridge converterPackage Included10 x CJMCU Expansion Board ModuleSize:8cm x 8cm x 5cm (3.15in x 3.15in x 1.97in)
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry Pi
$36.73Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesSupports any revision of Raspberry Pi (directly-pluggable)Onboard 4 ≠ 8 RGB LED (WS2812B)Control pin is configurable via jumpers (0┯ resistor)Break out control pins, easy for working with other MCUComes with development resources …
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry PiRead More
IR908-7C PT908-7C SideTransmitter and Receiver Paired Tube 1.5mm Transparent 940nm
$2.82Electronic Accessories & SuppliesAdd to cartFeaturesHigh sensitivitySmall junction capacitancePb freeDescriptionsPT908-7C is a phototransistor in miniature package which is molded in a water clear plastic with spherical top view lens.The device is spectrally matched to infrared emitting diode.ApplicationsOptoelectronic switchVCR ,Video CameraFloppy disk driveInfrared applied systemSpecificationModel:IR908-7C.PT908-7COutput form:NPN transistor typeChannel:single channelOutput wavelength:940 nmPackage included1 x IR908-7C phototransistor1 x PT908-7C phototransistor
20pcs ME2-CO-14×14 Carbon Monoxide Gas Sensor CO Sensor 0~1000 ppm for Civilian Area to Detect CO Concentration Carbon Monoxide Detector CO Alarms
$67.68Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openPrinciple IntroductionWinsen Electronics, produces Carbon monoxide sensor CO gas sensor, with low cost and fuel cell working principle.ME2-CO-14×14, fuel cell type sensor, detects gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current …
6inch/150mm Aluminum 12V DC Max Load 1000N Linear Actuator Electric Putter Motor
$111.36Switch AccessoriesAdd to cartFeatures* Wear-resistant, smooth appearance, high compressive strength.* Maximum thrust 6000N.* Easy to use.SpecificationMaterial:Aluminum + PlasticColor:SilverSize:28 x 8cmInput:12V DCStroke:6 inch/ 150mmMax load:1000NSpeed:12 /sPackage included1 x Electric putter2 x Bracket
Reviews
There are no reviews yet.