Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
Food Dehydrator Machine Electric Multi-Tier Preserver Meat/Fruit/Beef/Vegetable Dryer
$147.81ConnectorsAdd to cartFruit Dehydrator 5 Layer Household Vegetable Herb Meat Drying Machine Snacks Small Food Dryer Good Package Air DryerTechnical SpecificationsModel:JZE-R2Color:PinkProduct:Food DehydratorVoltage:220VFrequency:50HzCapacity:5 LayersPower:245WMachine size:215*245*245mm/8.5*9.6*9.6inch ( Height 300mm/11.8inch after raising the shelf) Features and Benefits 5 Interchangeable & Height adjustable trays 35 degrees to 70 degrees, different ingredients, different temperatures, eight-speed adjustmen Transparent trays allow you to check …
Food Dehydrator Machine Electric Multi-Tier Preserver Meat/Fruit/Beef/Vegetable DryerRead More
10Pcs 433Mhz Wireless RF Transmitter and Receiver Module Kit
$22.46Smart ModuleAdd to cartDescriptionThis is 433Mhz RF transmitter with receiver kit for ARM MCU wirelessApplication environmentRemote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote …
10Pcs 433Mhz Wireless RF Transmitter and Receiver Module KitRead More
3pcs Voltage Frequency Converter 0-10V To 0-10KHz Conversion Module 0-10V to 0-10KHZ Frequency Module
$17.50Converter BoardAdd to cartOverviewThe voltage to frequency module LM331_V2F is a module that can generate different frequencies depending on the input voltage. It is capable of converting 0-10V voltage into a frequency pulse signal of 0-10KHz.Features1. Input voltage, output frequency signal.2. The output signal can be fine-tuned, and the potentiometer can be adjusted to calibrate the correspondence between …
Mount in Desk Powered 4 Port USB 3.0 HUB Charging Adapter Cable Organizer
$87.06Switch AccessoriesAdd to cartSpecificationName:4 PortsUSB 3.0 HubModel:XDUH-334Color:BlackMaterial:PlasticSize:69 *24* 60mminch / 2.71inch*0.94inch*2.36inchPower plug:EUplugRated voltage:100V-240VFeature-Support for Windows and Mac operating systems;-The line length is 75CM, which can extend the USB interface from the chassis to the desktop, so you can connect any USB device on the desktop.-Equipped with an external power connector to connect to the power supply-Readable data; rechargeable; …
Mount in Desk Powered 4 Port USB 3.0 HUB Charging Adapter Cable OrganizerRead More
Catda 8GB RAM Raspberry Pi 4B + Cover Box + Power Supply + 32/64GB Memory Card +Micro HDMI DIY Kit
$238.94Raspberry Pi & Orange PiAdd to cartCapacity 32G Plug US Plug / Capacity 64G Plug US Plug / Capacity 32G Plug EU Plug / Capacity 32G Plug UK Plug / Capacity 32G Plug AU Plug / Capacity 64G Plug EU Plug / Capacity 64G Plug UK Plug / Capacity 64G Plug AU Plug /
Car Speaker Amplifier bluetooth 4.1 Audio Receiver Module Modification Accessories Motherboard Stereo
$8.73Amplifier BoardAdd to cartFeatureSupport bluetooth 4.1, support automatic connection back, support WAV+APE+FLAC+MP3 lossless decoding, stereo output.Power Supply:3.7-5VSNR:90dBTHD+N:-70dBCrosstalk:-86dBDNR:91dBSupport:A2DP / AVCTP / AVDTP / AVRCP / HFPLOS:>15MInterface detailsUSB powered:Universal Micro USB 5V powered3.7-5V power supply pad:realize external 3.7-5V lithium battery power supply modificationLED indicator:Bluetooth mode blue light is always on3.5mm stereo audio interface:standard 3.5mm interface, output stereo, can be plugged …
Reviews
There are no reviews yet.