Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
10pcs TK10-1P 1 Channel Relay Module High Level 10A MCU Expansion Relay 12V
$20.90Relay ModuleAdd to cartSpecificationsVoltage:12VQuiescent current Dynamic current:25mA@24V, 45mA@12V, 85mA@5VSignal:>2V, 0.5mAResponse time:50mSFeatures– the control area and the load area and the contact are in accordance with the creepage distance requirement;– With relay action indication, the suction is bright, and the disconnection is not bright;– Can be used as a microcontroller development board module, can be used as home appliance …
10pcs TK10-1P 1 Channel Relay Module High Level 10A MCU Expansion Relay 12VRead More
DC-DC 0.9V-5V USB Output Charger Step Up Power Module
$4.04Power Supply ModuleAdd to cartDC-DC 0.9V-5V USB Output Charger Step Up Power ModuleDescriptionInput voltage:0.9V – 5VOutput voltage:5.1 – 5 .2 VOutput Current:500mA (single lithium input)Efficiency:Up to 96% (the higher the input voltage, the higher the efficiency)Switching frequency:500KHzOutput ripple:30mV (MAX) 20M bandwidth (input 4V output 5.1V 1A)Voltage indication:LED lights with load (input voltage less than 2.7V LED indicator off)Operating Temperature:Industrial …
DC-DC 0.9V-5V USB Output Charger Step Up Power ModuleRead More
AC-DC Switching Power Supply Module AC 100-240V to DC 24V 9A Power Supply Board
$30.60Power Supply ModuleAdd to cartFeatureInput voltage:AC 100-240V 50/60HZOutput voltage:DC 24VOutput current:Rated 6A, peak 9AOutput power:150W(Max 220W)Location pore zize:105.8 x 55.7mmOverall dimensions:115 x 65mmRipple noiseOvercurrent protection:YesOverload protection:YesShort circuit protection:YesPackage includes1 x AC-DC Switching Power Supply Module
21 Holes Acrylic Transparent Lollipop Stand Party Candy Cupcake Display Rack
$20.24Bottles & JarsAdd to cartSpecificationsMaterial:AcrylicColor:TransparentType:21 PolesThickness of board:2mmSize:(L)x(W)x(H) 28 x 12 x 5 cm / 11.02′ x 4.72′ x 1.97′(appr.)Features Made of acrylic material. Each plate comes with a protective film to minimize scratching during shipping. 21 poles acrylic lollipop rack, can used at party or store. Easy to disassemble for clean and storage. Easy to assemble. Whether for …
21 Holes Acrylic Transparent Lollipop Stand Party Candy Cupcake Display RackRead More
GY-SHT30-D SHT30 3.3V Digital Temperature and Humidity Sensor Module IIC I2C interface
$10.92Sensor & Detector ModuleAdd to cart*Note:Joint product & Provided by Hobbyant and Newchic.More document click to downdoad:SHT30FeaturesThe digital temperature and humidity sensor module uses the SHT30 chip, and the measurement data is factory corrected, linearized, and temperature compensated. With temperature and humidity alarm output and software and hardware reset function. Avoid use in volatile organic environments in order not to …
GY-SHT30-D SHT30 3.3V Digital Temperature and Humidity Sensor Module IIC I2C interfaceRead More
FB04-500 500mW 405nm Blue Violet Laser Module 2*2.54-2P TTL/PWM Modulation for EleksMaker Engraver
$84.23Laser ModuleAdd to cartWhat’s the diference between FB03 Series and FB04 Series Laser Module When or why do i need to have a FB04 Series Laser Module– It depends on what the interface for laser module on your controller board is like. – The controller board of EleksMaker Series Engraver is designed with a 3-Pin (12V/GND/PWM) interface for …
1Set 15cm 20cm 25cm Multifunctional PCB Ruler Measuring Tool Resistor Capacitor Chip IC SMD Diode Transistor Package 180 Degrees
$13.76Electronic Accessories & SuppliesAdd to cart15CM PCB Ruler FeaturesMaterial:PCBFont size guide, trace-width diagram, and a set of AWG-sized drillsCentimeter side:0.1cm marks20CM PCB RULER DescriptionThis versatile PCB ruler, It also integrates relevant information for PCB design such as angle gauges, devices, IC pin spacing tables, and more. Electronic enthusiasts in the design process in urgent need of a measurement tool can …
Reviews
There are no reviews yet.