Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
MSI.SDR Panadapter Kit Broadband Software Radio MSI.SDR Receiver 10KHz-2GHz Panadapter Module Compatible with SDRPlay RSP1 Software
$112.66Electronic Accessories & SuppliesAdd to cartDescriptionMSI.SDR is a powerful broadband full-featured SDR receiver.Covers frequencies from 10KHz to 2GHz. Just connect a PC and an antenna. The function of the receiver can be provided.Compatible with all SDRPlay RSP1 software. Compatible with popular SDR software platforms You can monitor up to 10 MHz of spectrum simultaneously. Enjoy all modes of operation. Small …
5pcs JDY-18 bluetooth Module 4.2 High Speed Transmission BLE Mesh Networking Master
$30.17Other Module BoardAdd to cartProduct introductionThe JDY -18 transmission module is based on the bluetooth 4.2 protocol standard, the working band is 2.4GHZ, the debugging mode is GFSK, the maximum transmission power is 0dB, the maximum launch distance is 60 meters. The imported original chip is designed to support the user to modify the equipment name, service UUID, transmit …
5pcs JDY-18 bluetooth Module 4.2 High Speed Transmission BLE Mesh Networking MasterRead More
4 Coil Brushless Motor Fan Blade High-speed Turbine Hall Electric Machine Model
$168.87PhysicsAdd to cartDescriptionFour Coil Brushless Fan Blade High-speed Turbine Hall Electric Machine Stirling Engine Model SpecificationName:Four Coil Brushless Motor Fan ModelCoil:Four Coil DesignPrinciple Design:Electromagnetic Induction, Mechanics, Hall Sensor.Size:155*125*150mmPower:8WWorking Voltage:12VSpeed:3000r/minAdapter Input Voltage:AC100-240V 50/60HzAdapter Output Volatage:DC12V 3AType:General motor:Hall electric motorDegree of loss:carbon brush,easily consumable:brushless,durableStructure:complex:simple easy maintenanceQuality:low:highTechnology integration:low:highWorking Life:short:longTheory1.Hall effect is a semiconductor sensor, under the action of loren magnetic …
4 Coil Brushless Motor Fan Blade High-speed Turbine Hall Electric Machine ModelRead More
TA8131 Digital Luxmeter illuminance Light Meter 100000Lux Lux/FC illuminometer
$52.64Laboratory Thermostatic DevicesAdd to cartDescription* 3-1/2 digit LCD display, Max reading 1999.* Hand or Auto measuring range:0~100,000Lux.* LUX/FC Unit selection.* MAX and MIN Reading Hold Function.* Storage 50 datas and delay logging function(1 to 60 seconds selection).SpecificationsItem:Digital Lux meterModel:TA8131Brand:TASIMeasuring Range:100Lux, 1000Lux, 10000Lux, 100000Lux. (10/100/1000/10000 Fc)Resolution:0.1LuxAccuracy:±3% rdg ± 10dgts( ±4% rdg ± 10dgts(>10,000 lux)Total accuracy:for C.I.E standard illuminate A(2856K)Sample Rate:2times/SRepeatability:±2%Range …
TA8131 Digital Luxmeter illuminance Light Meter 100000Lux Lux/FC illuminometerRead More
Aluminum Alloy 100W 28KHz Ultrasonic Piezoelectric Transducer Cleaner Silvery
$51.62Electronic Accessories & SuppliesAdd to cartFeatures1. Low heat2. Good thermal stability3. Frequency and static capacitance consistency strong.4. Resonance impedance is low.5. The average length of life.6. It can be widely used in a variety of ultrasonic cleaning equipment.7. High performance:mechanical Q value, high vibration efficiency, high amplitude8. The full range (17KHZ-200KHZ), to meet the different needsParameterMaterial:Aluminum AlloyPower:100WResonant frequency:28 ± 0.5 …
Aluminum Alloy 100W 28KHz Ultrasonic Piezoelectric Transducer Cleaner SilveryRead More
10Pcs Mini DC-DC1.3A Voltage Converter Step Down Module 12V 24V to 5V 3.3V 9V with integrated inductor for 360 RC
$17.74Boost & Buck ModuleAdd to cartFeaturesThe maximum output current is 1.3A, and it is running within 1A for a long time;Non-isolated DC synchronous rectification with up to 94% conversion efficiencyOne-piece inductor, lower heat than ordinary shielded inductorUniversal, optional output voltage, spot welding directly on the boardOutput with LED indicator for easy and visual indication of voltage outputWith enable (EN) port, …
Reviews
There are no reviews yet.