Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
10pcs ZF-1 ASK 315MHz Fixed Code Learning Code Transmission Module Wireless Remote Control Receiving Board
$33.80Smart ModuleAdd to cartFeatureProduct model:ZF-7 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:30~45mACoding type:fixed code (SC2262)Radiated power:30~45mWTransmission distance:1000 meters (receiver sensitivity -108dBm)Volume:40mm*20mm*10mm:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:-:Negative power supply3:+:Positive power supply4:H-L:Digital pinRated parameter:Symbol:ValueDC supply voltage:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes10 x Receiver Board
2pcs Digital DC 0-100V 0-10A 250W Tester DC7-12V LCD Digital Display Voltage Current Power Meter Voltmeter Ammeter Amp Detector Geekcreit for Arduino – products that work with official for Arduino boards
$34.98Test & Measuring ModuleAdd to cartSpecificationsSimultaneous display of voltage and currentVoltage Measurement Range:DC 0-100VCurrent Measurement Range:0-10APower Measurement Range:0-1000WVoltage Error Range:÷1% (Adjustable)Current Error Range:÷1% (Adjustable)Power Error Range:÷1% (Adjustable)Refresh Rate:300ms/TimesDisplay Method:HTN LCD 3 Rows of 3 DigitsSupply Voltage:DC 7-12VWorking CurrentWorking Temperature:-10 to 60→Package Included2 x DC Digital Voltmeter Ammeter 4 x Cable
5pcs ESP8285 Development Board Nodemcu-M Based on ESP-M3 WiFi Wireless Module Compatible with Nodemcu Lua V3
$49.76Motherboard & Development BoardAdd to cartOverview1. It is fully compatible with Nodemcu V3, but cheaper than it is. NodeMcu is an open source firmware and development tool that helps you prototype your IOT products in several Lua script lines.2. The ESP8285-based development kit integrates GPIO, PWM, IIC, 1-Wire and ADC into a single board.3. The fastest way with the NodeMCU …
Vacuum Cleaner Charger Base for iRobot Roomba 5 6 7 8 9 Serie 595 780 880 860 980 960 Charger Base Dock
$85.04Solar CollectorsAdd to cartSpecificationName:Charger Base DockModel:C04612Material:Plastic Color:Black Size:As picture shownApplication Models:For iRobot Roomba 500/600/700/800/900Features-Let the robot automatically recharge when there is no power.-A good helper for family cleaning.Package Include1 x Charger Base Dock1 x Charger Cable
DC 12V 3.5mA Microphone Pickup Audio Microphone Amplifier Module DIY Kit Dual Track Output Gain Adjustable
$4.93DIY Electronic KitsAdd to cartDescriptionProduct name:Microphone with adjustable sensitivityWorking voltage:DC9-15V, 12V recommendedWorking current:above 100mAResponse frequency:20Hz-20KHzMonitoring range:about 100 square metersFinished product size:length 56 * width 25 * height 16mmProduct net weight:15 gramsThe power input has anti-reverse protection, which can effectively prevent the module from being damaged if the power is reversed.Product descriptionThis product uses a low-noise processing chip, plus a …
3pcs 5V LED Traffic Light Display Module Electronic Building Blocks Board
$4.85Display ScreenAdd to cartFeatureSize:56 x 21 x 11mmFixing hole:3mmPitch:15mmColor:red yellow greenLED:8mm x 3Brightness:Normal brightnessVoltage:5VInput:Digital levelInterface:common cathode, red, yellow and green separate controlPlatform:, microcontrollerPackage includes3 x LED Traffic Light Module
Upgraded Version 3D Light Cube Kit 8x8x8 Blue LED MP3 Music Spectrum DIY Electronic Kit
$72.16DIY Electronic KitsAdd to cartNote1. This product does not include housing!! if you need the housing, please purchased separately (Product ID:1247731).2. This is a DIY kit, you need to have some knowledge of electronics and ability.3. Need a lot of soldering, you should have enough patience.4. 8x8x8 blue lights display version.5. APP function only supports Android6. File:Click here to …
Upgraded Version 3D Light Cube Kit 8x8x8 Blue LED MP3 Music Spectrum DIY Electronic KitRead More
Reviews
There are no reviews yet.