Robotdyn with POE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$91.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an ARDUN0 IDE, open a sketchand start the compilation/upload.
Programming in ARDUN0 IDE
Leonardo ETH(V2) can be programmed via an ARDUN0 IDE. Select ARDUN0 Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:this item, without PoE version:Product ID 1660664
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14, D15, D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half-duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Passive PoE (optional)
Ethernet Power (IN):12~48V DC
Output:DC 9V
PoE type:Passive PoE
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.062 kg |
---|
Customers Also Viewed
5PCS Cake Stand Set for Wedding Decorations White Table Kit Decorating Party Suppliers for Fondant Dessert Metal Cupcake Stand
$159.44Lab Clamp & StandAdd to cart5Pcs Metal Cupcake Stand Cake Dessert Wedding Event Party Display Tower Plate Features※ Ideal cake stand, widely used for personal birthday party, birthday, celebrations, banquets, marriage, graduation ceremony. ※ Used to display merchandise, play a very good decorative effect.※ This is also perfect for afternoon tea session. ※ High quality raw iron material, rejecting waste …
Robotdyn Digital Tilt Sensor Module Tilt Switch Angle
$8.73Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureDigital tilt sensor, have simple function, if the sensor are not placed on a strict flat surface, the little steel ball in the green tube will slip to one end of it, …
Robotdyn Digital Tilt Sensor Module Tilt Switch AngleRead More
20pcs LM317 DC-DC 1.5A 1.2-37V Adjustable Power Supply Board DC Converter Buck Step Down Module
$41.11Boost & Buck ModuleAdd to cartSpecificationsOutput Current:1.5A (minimum), 2.2A (typical value)Input-output voltage difference (VI-VO):40Vdc (max)Adjustable output voltage range:1.2 – 37VWorking temperature:-55 ° C to + 150 ° CCurrent output:1.5AVoltage Input:4.2 – 40 VOperating temperature:0 ° C – 125 ° CCharacteristic frequency:100 (MHz)Module size:35.6 (mm) x 16.8 (mm)Output mode:VOUT output positive, GND output negativePackage included20 x LM317 DC-DC 1.5A 1.2-37V adjustable …
4-way Switch Module Ewelink Phone Remote Control Small Voice DIY SCM Development Modified Board
$13.11Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Power supply descriptionThis module uses 5V DC power supply, usable with USB power supply equipment such as mobile phone charger, charging treasure, computer and so on.Enter descriptionIt can be connected with four …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development Board
$8.73Sensor & Detector ModuleAdd to cartDescriptionThis is a breakout board for Freescale’s MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface.The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be …
MPR121-Breakout-v12 Proximity Capacitive Touch Sensor Controller Keyboard Development BoardRead More
DG7512 75V 12A High Current Ideal Diode Solar Energy Anti-backflow Charging Anti-backflow Protection Low Resistance
$7.64Electronic Accessories & SuppliesAdd to cartSpecificationModule name:DG7512 anti-backflow ideal diodeWorking voltage:DC5-75VWorking current:12A (MAX) (without heat dissipation for a long time working within 10A,Can be used in parallel to increase operating current)Static operating current:0.7mAInput reverse connection protection:None (do not reverse the positive and negative poles, otherwise the chip will be burned)Working temperature:-40→~125→Connection method:welding outputModule size:25 *14*3.8mmPackage included1 x High Current Ideal …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash Light
$28.42Other Module BoardAdd to cartSpecificationsModel No.:HBV-1610Model Size:86.11mm ≠ 21mm ≠ 5.03mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:AutoObject distance:30CM-infinityResolution:600LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:730 mWOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:GT2005 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:1600*1200Sensitivity:33000mv /(lux-sec)Pixel Size:1.75m x 1.75┢m Maximum Image Transfer Rate:MJPEG 640×480 …
HBV-1610 2MP Auto Focus Micro Mini USB2.0 Camera Module with Flash LightRead More
Reviews
There are no reviews yet.