Robotdyn without PoE Leonardo ETH ATmega32U4 Ethernet W5500 (V2) Development Board
$80.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product Overview
If you’re looking to build a network-connected device, RobotDyn Leonardo ETH(V2) is the best solution for you!
Leonardo ETH(V2) is a fully-featured Ethernet-connected device. Depending on your use case, it can act as a server or a net member. In a server role, it will receive requests from other devices and services in local network and internet, and respond or react accordingly. In a net member role, the RobotDyn Leonardo ETH(V2) can collect data from different devices or industrial equipment and send it through the local network or Internet. It can also receive data from local network and internet, and control connected devices and equipment. The RobotDyn Leonardo ETH(V2) can also act as stand-alone unit, providing autonomous reaction based on the defined algorithm in response to network changes or other triggers.
Leonardo ETH(V2) features two devices on one board:Leonardo based on an ATmega32U4 and Ethernet controller based on WizNet W5500 TCP/IP. It also has an optional PoE function (receiving power directly through the Ethernet cable).
W5500 Ethernet
WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MACand PHY. W5500 is using a highly efficient SPI protocol, with 80 MHz clocks for high-speed connectivity to Atmega32U4. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.
Ports and buses
Leonardo ETH (V2) has 23 digital input/output ports, seven of which can be used for PWM, and 12 analog ports with 10-bits resolution (0 – 1023). 5 ports have a hardware interrupt feature. The board is equipped with an RJ45, micro USB, DC power jack, and a reset button. Unlike the other Leonardo ETH clones, Leonardo ETH(V2) has three additional digital SPI bus ports D14, D15, D16, which can be also used to communicate with other devices via SPI.
SD-card
The board also features a microSD card socket. A microSD card can be used to save and store the data, which can later be transferred over the network. Digital port D4 (CS-CS2) of the ATmega32u4 is dedicated to work with the microSD. Digital port D10 (SS-CS2) is used by WizNet W5500. The Ethernet controller and microSD card are connected through the SPI bus, which is brought out as a separate ICSP connector with ports D14, D15 and D16.
HID functions
Leonardo ETH(V2) can also act as an HID device. It can be used as a mouse or keyboard on the connected computer, in addition to the CDC sequenced/COM-port. You can program it to control an application on your PC. For example, you can set it up to turn your PC on, and then launch and control certain applications. The board itself can start an Arduin IDE, open a sketchand start the compilation/upload.
Programming in Arduin IDE
Leonardo ETH(V2) can be programmed via an IDE. Select Leonardo or Leonardo ETH in the Boards menu, and use the Ethernet2 / Ethernet3 library.
Power supply
Leonardo ETH(V2) can be powered via
USB port (5V, 500mA);
DC-IN Jack, PWC 2.1mm, (supporting 7-24V DC input voltage);
Through an Ethernet cable using PoE (Power over Ethernet) – requires a PoE-enabled switch or a PoE injector.
Note
With PoE version:Product ID 1660677, without PoE version:this item
The PoE module is optional. There are several PoE options available, depending on the PoE equipment you use.
The Active PoE is compliant with 802.3af or 802.3at. It will check the power coming in, if it doesnt meet the device requirements, it just wont power up.
The Passive PoE is a simplified version that does not perform a handshake, so it is important to know what PoE voltage your device supplies requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.
Make sure to select the correct board option with a relevant PoE module.
Specifications
Leonardo ETH V2
Input Voltage (VIN/DC jack):7~24V
Power IN (USB):5V-limit 500mA
Power IN (PoE):Optional module, 48V(Input), 9V(Output)
Digital I/O:23
PWM Output:7
Analog I/O:12
Reserved Pins:D4 is used for SD card select;
D9 is used for SD card detect;
D10 is used for W5500
D14,D15,D16 are used for SPI.
*Optional:D8 is used for W5500 interrupting, D11 is used for W5500 initialization
USB socket:Micro-USB
Ethernet socket:RJ45
PCB Size:53.3≠68.6mm
Card Reader:Micro SD card, with logiclevel convertor
Weight:41g
Leonardo MCU
Microcontroller:ATmega32u4(AVR)
Operating Voltage:5V
Flash memory:32KB of which 4KB used by bootloader
SRAM:2KB
Clock Speed:16MHz
EEPROM:1KB
Ethernet MCU
Microcontroller:Wiznet W5500
PHY compliance:10BaseT/100BaseTX Ethernet. Full and half duplex
Operating Voltage:3.3V, 5V I/O signal tolerance
Memory:Internal 32Kbytes Memory for Tx/Rx Buffers
TCP/IP Protocols:TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
PHY Clock Speed:25MHz
Documents
Dimensional drawing:Click here to open
Pinout:Click here to open
Schematic:Click here to open
Tutorial:Click here to open
Package includes
1 x Leonardo module
Weight | 0.044 kg |
---|
Customers Also Viewed
5065cm Engraving Area Laser Engraving Machine DIY Kit Desktop Laser Cutting Printer-without Laser Module
$356.97Laser Engraving MachineAdd to cart1. Benbox Software & Manual:Click to download2. Assembly Instructions, please check:http://myosuploads3.hobbyant.com/products/20190326/201903260314326550.zipDescriptionThis DIY desktop blue laser engraving machine is ideal for amateurlaser engraving usage with grayscale printing,low-light positioning and freedompositioning functions.It only need you to connect it to the computer,then you canprint any pictures your like with your own creativity.SpecificationsMaterial:stainless steel and acrylicWorking Voltage:DC 12VEngraving Area:65x50cm(maximum)Size:72x63cmControl …
3pcs 0.36 inch DC0V-32V Red LED Digital Display Voltage Meter Voltmeter Reverse Connection Protection
$10.64Test & Measuring ModuleAdd to cartFeature∵ Super high precision∵ Ultra-low startup voltage, red minimum 2.5V, green minimum 2.7V, blue minimum 3.0V. When the power supply voltage is lower than 3.5V, only the brightness is lowered, but the measurement accuracy is not affected.∵ With reverse connection protection, it will not burn.Measuring range:0.00V-32.0VPower supply range:Red DC2.50-32.0V, green DC2.70-32.0V, blue DC3.00-30.0VHighest input:DC32.0V. Note:If …
120A Amplifier Rectifier Filter Supply Power Board High Power Schottky Rectifier Filter Power Supply Board 10000uf 125V
$109.34Other Module BoardAdd to cartSpecification – Power board with double-sided tinplate PCB board, 8 H-itachi 10000uf 125V capacitor, 4 original import disassemble Schottky 30A150V equivalent to 120A bridge heap!– Schottky’s characteristics are fast, small internal resistance (pressure drop naturally low),So the original rectifier than the original power amplifier for the high demand for power.– Input power:Maxmium Double AC 60V(60V-0-60V)– …
8 inch 25W 6V USB Solar Panel Powered Iron Fan Home Cooling Ventilator Camping Laptop Fan
$153.89Solar CollectorsAdd to cartFeaturesThe fan runs when plugged to the solar panel. And it can be used alone by plugged into computer USB port.When plugged to the solar panel, how the fan works depends on the sunlight.When the sunlight is strong, the fan works fast. When the sunshine is not strong enough, the fan may work low or …
8 inch 25W 6V USB Solar Panel Powered Iron Fan Home Cooling Ventilator Camping Laptop FanRead More
10pcs DC 12V 6A 3 String Battery Protection Board Panels Solar Street Lights
$29.51Other Module BoardAdd to cartDescriptionSize:56x45x3mmContinuous working current:Within 6ACharge current:Within 6ABalance charging:YesShort circuit protection:YesFunction:Prevent overcharge, overplay, circuit protectionSuitable assembly:Nominal 3.7V electric core / three stringsPackage Included10 x 12V Battery Protection Board
Practical CPU info 1.6 inch 84×48 Matrix LCD Memory Display Module with Backlight for Raspberry Pi
$20.80Raspberry Pi & Orange PiAdd to cartFeatures∵ 1.6 inch, 84 x 48 pixels matrix LCD∵ Through the Raspberry Pi internal C programming, to Pi running on the CPU occupancy rate and memory occupancy rate display on the LCD screen, be clear at a glance∵ Can be programmed to show what you want to display∵ A backlight jumper back through the software …
Reviews
There are no reviews yet.