4000W 85A ZVS High Frequency induction Heating Board Machine with Heating Coil Water Pump 70ml Crucible
$465.78
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product features and functions
1. Use 2mm thickness PCB design, copper thickness 2OZ, large current, good heat dissipation;
2. 180mm 220V cooling fan;
3. The heating coil is wrapped with high-temperature insulation material to prevent short circuit during heating, and a specific heating coil is customized;
4. The input terminal uses high-current power terminals, which can be directly connected to a dedicated 100A power meter;
5. Send the matching water pump for heating ring water cooling, and send the temperature sensor to monitor the temperature of the motherboard at any time;
6. Optional external control board function, which can achieve external soft key control, control board integrated overload protection temperature protection, etc.
Product parameters
1. Overall dimensions:length * width * 220 * 180 * 150 (unit:mm);
2. Heating ring size:60 * 70 * 73 or 70 * 80 * 73mm (inner diameter * outer diameter * height);
3. Input voltage:DC48V;
4. Maximum power:4000W;
5. Maximum DC working current:85A
6. Metal iron is directly heated to a maximum temperature of 1000 degrees Celsius
7. The maximum temperature of the crucible is 1600 degrees Celsius
Precautions
1. It must be ensured that the power supply can stably output a current of more than 80A. Generally, two 50A communication power supplies are used in parallel.
2. The power-on queue should follow the power supply to the power supply, wait a few seconds for the power supply to stabilize, then connect the power supply between the power supply and the motherboard (recommended to use a 100A current switch), and finally press the red button on the green control interface . Do not make mistakes, otherwise the motherboard will be burned directly and unprotected. When shutting down, first turn off the red button, then turn off the switch between the motherboard and the power supply, and finally turn off the power switch.
3. When working, water cooling and air cooling must work at the same time. If any of them does not work, you should immediately disconnect the power and contact the manufacturer for a solution;
4. If conditional water cooling can be used, cold water can be directly discharged into the hot water without circulation, so that the heat dissipation effect is better;
5. Crucibles should be prepared for long-term use. The high temperature heating of graphite will react with oxygen to generate carbon dioxide and gradually consume the crucible;
6. Pay attention to the changes of various parameters of the display at all times, especially the voltage and current and the temperature of the main board. Once the abnormality is found, the power must be disconnected immediately.
Package includes
1 x Motherboard
1 x Heating coil
1 x Water pump
1 x Pump power supply
1 x Water pipe
1 x 70ml crucible
Weight | 4.116 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.