4000W 85A ZVS High Frequency induction Heating Board Machine with Heating Coil Water Pump 70ml Crucible
$465.78
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Product features and functions
1. Use 2mm thickness PCB design, copper thickness 2OZ, large current, good heat dissipation;
2. 180mm 220V cooling fan;
3. The heating coil is wrapped with high-temperature insulation material to prevent short circuit during heating, and a specific heating coil is customized;
4. The input terminal uses high-current power terminals, which can be directly connected to a dedicated 100A power meter;
5. Send the matching water pump for heating ring water cooling, and send the temperature sensor to monitor the temperature of the motherboard at any time;
6. Optional external control board function, which can achieve external soft key control, control board integrated overload protection temperature protection, etc.
Product parameters
1. Overall dimensions:length * width * 220 * 180 * 150 (unit:mm);
2. Heating ring size:60 * 70 * 73 or 70 * 80 * 73mm (inner diameter * outer diameter * height);
3. Input voltage:DC48V;
4. Maximum power:4000W;
5. Maximum DC working current:85A
6. Metal iron is directly heated to a maximum temperature of 1000 degrees Celsius
7. The maximum temperature of the crucible is 1600 degrees Celsius
Precautions
1. It must be ensured that the power supply can stably output a current of more than 80A. Generally, two 50A communication power supplies are used in parallel.
2. The power-on queue should follow the power supply to the power supply, wait a few seconds for the power supply to stabilize, then connect the power supply between the power supply and the motherboard (recommended to use a 100A current switch), and finally press the red button on the green control interface . Do not make mistakes, otherwise the motherboard will be burned directly and unprotected. When shutting down, first turn off the red button, then turn off the switch between the motherboard and the power supply, and finally turn off the power switch.
3. When working, water cooling and air cooling must work at the same time. If any of them does not work, you should immediately disconnect the power and contact the manufacturer for a solution;
4. If conditional water cooling can be used, cold water can be directly discharged into the hot water without circulation, so that the heat dissipation effect is better;
5. Crucibles should be prepared for long-term use. The high temperature heating of graphite will react with oxygen to generate carbon dioxide and gradually consume the crucible;
6. Pay attention to the changes of various parameters of the display at all times, especially the voltage and current and the temperature of the main board. Once the abnormality is found, the power must be disconnected immediately.
Package includes
1 x Motherboard
1 x Heating coil
1 x Water pump
1 x Pump power supply
1 x Water pipe
1 x 70ml crucible
Weight | 4.116 kg |
---|
Customers Also Viewed
Ebyte E810-DTU(CAN-ETH) Smart Protocol Conversion GPRS Modem Modbus to TCP/IP CAN Bus Ethernet interface Modbus RTU Gateway
$96.54Smart ModuleAdd to cartSpecificationItemsDescriptionInterfaceEthernet:RJ45, 10/100MbpsCAN:1*5*3.81, ScrewingNetwork protocolIP,TCP/UDP, ARP, ICMP, IPV4Simple transparent transmissionTCP Server,TCP Client,UDP Server,UDP Client,Cloud transparent transmissionData Packing MechanismByte packing and time packingTCP Server connectionSupporting up to 6 TCP connectionsIP accessStatic IP,DHCPDNSSupportCAN Transmit baud rateA total of 15 baud rates from 6Kbps-1000KbpsCAN filtering modeUp to 8 filtration modesCAN data layoutProtocol formatParameter configurationWeb page configurationWorking current82mA@12VVoltage8V~28VDC,Over 28V may …
TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger Module
$4.36Battery Protection ModuleAdd to cartSpecificationProduct name:Lithium Battery Charging BoardInput voltage:5VMaximum charging current:1000 mACharge cut-off voltage:4.2 V + / – 1%Battery overcharge protection voltage:2.5 VBattery over-current protection current:3 AInput interface:micro USBSize:27mm x 17mmHow to Use1. Input port with micro 5pin USB female, can directly use mobile charger for input to the lithium battery,and still retain the input voltage wiring solder …
TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger ModuleRead More
10pcs 10-50W 15Wx2 Audio Power Amplifier DC 6 -18V TDA7297 Module Double Channel
$77.83Amplifier BoardAdd to cartFeatures– Working Voltage:6-18V DC– The onboard TDA7297 audio power amplifier chip, double channel 15WX15W– Speaker for European 4-8 10-50W use– Main pin has led chip, convenient external control device, the onboard– 5.08 (mm) distance between two p terminal 2 road, around a track connection output respectively– The onboard dial potentiometer, output size can adjust the …
10pcs 10-50W 15Wx2 Audio Power Amplifier DC 6 -18V TDA7297 Module Double ChannelRead More
LILYGO TTGO ESP32-Micro32 ESP-32-PICO WIFI Wireless bluetooth Control Module
$20.57Smart ModuleAdd to cartFeatureSeries:ESP32Model:ESP32-+MicroType:Regulator ICPower:1WApplication areas:household appliances, smart home, wearable devices, Internet of Things IoTDescriptionsESP32 vcc range:2.2V-3 6VVBAT:direct to battery (and charger)VUSB:direct to USB(5V)VCC:Output of regulator 3.3V/600mAUp to 250mA during RF transmissionsWirelessWifi:802.11 b/g/n/e/iWPA/WPA2/WPA2-Enterprise/SPSbluetooth:bluetooth 42BLESize:1.9×1.3cm/0.75×0.51inchNotePlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the …
LILYGO TTGO ESP32-Micro32 ESP-32-PICO WIFI Wireless bluetooth Control ModuleRead More
50Pcs 915MHz SW915-TH12 Copper Spring Antenna for Wireless Communication Module
$28.90Module ComponentsAdd to cartFeaturesSW915-TH12 copper spring antenna is a special antenna for 915MHz wireless communication system design. The antenna has good standing wave ratio, compact shape, ingenious structure, convenient installation, stable performance and good anti-vibration and aging ability.SpecificationFrequency range:915 MHz (+/-5)Standing wave ratioInput impedance:50Maximum power:5WGain:2.15 dBiWeight:1gHeight:12.5+/-1 mm (9T)Antenna color:copperInterface Form:Direct WeldingPackage included50 x Antenna
5Pcs 360 Degree Rotary Encoder Module Encoding Module
$11.83Other Module BoardAdd to cartFunctional characteristics and technical parameters 1)Nominal voltage:DC 5V 2)Wire A, B:0.5mA (Max 5mA; Min 0.5mA) 3)Common wire:1mA (Max 10mA; Min 0.5mA) 4)Temperature range:-30→ to+80→ 5)Output signal A , B phase position output square wave, when clockwise rotation, A phase position pull ahead B phase position 90 °, when anti-clockwise, B phase position pull ahead A …
5Pcs 360 Degree Rotary Encoder Module Encoding ModuleRead More
RD21F Delay Relay Module Power for Delay off Fan Module AC 100V-220V Time 0.2S-300min Adjustable Delay
$13.11Relay ModuleAdd to cartSpecificationsVoltage:100V-220V ACPower consumptionOutput:The output voltage is the same as the input voltage, and the maximum power supply capacity is 10A.Size:88* 36 * 22mmScrew hole:center distance 83mm * 31mm, aperture 3.2mmTime range:(4 files, selected by switch)First gear:range 0.2 seconds-30 seconds, accuracy:0.1 secondsSecond gear:range 0.2 seconds – 300 seconds (5 minutes), accuracy:0.3 secondsThird gear:range 0.2 seconds-30 minutes, …
Reviews
There are no reviews yet.