Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
20Pcs Serial Port WIFI ESP8266 Module Adapter Plate with IO Lead Out for ESP-07 ESP-08 ESP-12
$12.02Smart ModuleAdd to cart20Pcs Serial Port WIFI ESP8266 Module Adapter Plate With IO Lead Out For ESP-07 ESP-08 ESP-12This Adapter Plate is for ESP-07 ESP-08 ESP-12, a test board with IO lead out.NoteNeed to solder 3V regulator by youself.ESP-07, ESP-08, ESP-12 module board are not included!!!Package included20 x Serial Port WIFI ESP8266 Module Adapter Plate40 x Pins
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220V
$35.99Relay ModuleAdd to cartFeaturesWith isolation groove in control area and load area.With power and relay action indication, bright when connect and go off when disconnects.When there is a signal in signal input, public side and common side will breakover.It can be not only used as a microcontroller development board module, but also as a home appliance control.It can …
20pcs 5V Low Level Trigger one 1 Channel Relay Module interface Board Shield DC AC 220VRead More
10pcs DC 3V Watering Small Water Pump Silent Mini Water Pump
$26.77Other Module BoardAdd to cartFeatureAmbient temperature:-20 ° C ~ 60 ° CUse ambient humidityUse medium:water, non-flammable fluid liquidUse scene:medical, fountain, etc.Life:>=200H (continuous work)Motor model:140 type 5500RPM/MINModel:Voltage Scope (DC):Current (A):Power (W):Max. Water Head (M):Max. Flow Rate (L/H):Starting Voltage:Waterproof GradeJT-DC3W-3:3V:0.12:0.36:0.35:80:1:IP68Package includes10 x Water Pump
3Pcs I2C WiiChuck Nunchuck Small Adapter Shield Module Board
$6.63Sensor & Detector ModuleAdd to cartSpecificationWiichuck is a board for Wii-Nunchuck.Use this shield to achieve communication between nunchuck with for without broking the controller for Wii Nunchuck.It is grate for DIY projects.Dimensions:1.02 in x 0.47 in x 0.28 in (2.6 cm x 1.2 cm x 0.7 cm)Package includes3 x Adapter Module
5Pcs YS-U12S5H AC to DC 5V 2A Switching Power Supply Module AC to DC Converter 10W Regulated Power Supply
$37.17Power Supply ModuleAdd to cart>>>Manual:Click here to openFeatures-Universal voltage input:AC100-265V AC-With overload, short circuit, over temperature protection function-Full load aging test-Ultra low output rippleSpecificationsModel:YS-U12S5HOutput characteristics:Output voltage:5VRated current:2000mACurrent range:0-2000mARippleOutput accuracy:÷1%Voltage regulation rate:÷1%Load regulation rate:÷1%Rated power:10WAdjustable output range:/Setup, rise, hold time:300ms、20ms、20ms/220VACInput characteristics:Input voltage range:AC100-264VInput currentFrequency range:47Hz-63HzEffectiveness:>83.5%Start impact circuit:COLD STARTLeakage currentProtection characteristics:Over power protection:150-170% rated power, automatic recovery after fault removalOver voltage …
CBB60 5Pcs 50UF 450V Water Pump Motor Run Capacitor
$64.03Module ComponentsAdd to cartFeaturesCBB60 Capacitors takes heavy-edge metallized Al/Zn PP film or web-like fuse film as dielectric. Its components are sealed with flame-retardant epoxy resin. It has cylindric outline with high reliability and stability.CBB60 capacitor has features of small size, light weight, small tangent in waste angle, and good self-concrescence. Applicable to startand operation with 50/60Hz. A. C …
CBB60 5Pcs 50UF 450V Water Pump Motor Run CapacitorRead More
20pcs ZFX-W1302 Digital thermostat Controller Temperature Controlling Temperature Meter for Automatic incubator
$172.94Test & Measuring ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsModel:ZFX-W1302Material:PVCPower Supply:DC 9-24VTemperature Measurement:-50 C – 120 CTemperature Control:0 C – 110 CTemperature Control:0.1 CDisplay Color:RedSensor:NTC B3435 10KSensor Cable Length:1MSize:99 * 43 * 22.6mmSetting Steps1. Short press the ‘Set’ key, the screen …
Reviews
There are no reviews yet.