Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
10Pcs 50cm Fishing Lures 316 Stainless Steel Wire Trace Leader Spinner Swivel Line
$14.16Switch AccessoriesAdd to cartSpecificationMaterial:316 Stainless steel & nylonColor:RedLength:50cmQuantity:10pcs/setFeatures-With black nickel rolling swivel and cross lock snap-Durable enough to prevent breakage of the wire when the fish is fighting-Capable to handle up to 50kgPackage Includes10x trace wires
5pcs 12-60V Car Lead Acid Battery Charge Level indicator Battery Tester Lithium Battery Capacity Meter Dual Red LED Tester Digital Voltmeter
$22.60Electronic Accessories & SuppliesAdd to cartDescriptionThis power meter is suitable for 12V, 24V, 36V, 48V, 60V, battery cars (not waterproof). It can also measure lithium batteries, polymer batteries, nickel-metal hydride batteries. Can also be used for other power / voltage measurement purposes.How to use:Connect the positive and negative terminals of the display board to the positive and negative terminals of …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI Express
$19.22Electronic Accessories & SuppliesAdd to cartDescriptionConnect any graphics card to a single 6-pin PCI-Express Power Cable. The 6+2-pin maleconnectors offer maximum versatility.Warning:Do not overload your power supply or the 6-pin power cable, running more than 300Wover a single 6-pin 18AWG PCI-Express cable is a fire hazard.Connectors:6-pin PCIe Female, 5x 6+2-pin PCIe MaleLength:8 inches / 20cmWire:18 AWG copperPackage included5 x PCI-e …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI ExpressRead More
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHz
$19.67Smart ModuleAdd to cartFeaturesIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable …
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHzRead More
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC Base
$83.13Electronic Accessories & SuppliesAdd to cartFeaturesPEB – 1 extension board, supporting RT809F use, support notebook IT8586E/IT8580E models such as EC, support the notebook, computer motherboards commonly used 32/40/48 feet BIOS chips (29/39/49/50 series FWH/LPC / 8 bit / 16 bit NOR flash), contact with pin detection, automatic identification of short circuit protection and unique features, to read and write speed …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC BaseRead More
Smart Robot Chassis Car Kit with 2Pcs Motor+ Speed Encoder + Battery Box for Arduino – products that work with official Arduino boards
$26.57Smart Robot & Solar PanelAdd to cartFeaturesMechanical structure is simple, it is easy to install.This car is the tachometer encoder.Can be used for distance measurement.Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.Download:www.uctronics.com/download/U3800.zipMotor ParametersVoltage:DC 3V:DC6V:DC 7.2VCurrent:160mA:220mA:250mANo-load Speed:120 rpm/min:200 rpm/min:250 rpm/minLoad Speed:100 rpm/min:175 rpm/min:210 rpm/minTorque:0.45 kg.cm:1.0 kg.cm:1.5 kg.cmReduction Ratio:1:48Noise:65dBMotor Size:65mm x 18mm …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover Kit
$21.65DIY Electronic KitsAdd to cartDescriptionHigh and low sound two-way, can be used for home audio, or car audio. High-quality components, fine workmanship. The four modes of high and low sound are adjustable, the whole process is free of welding, the use is simple and convenient, and the distribution of high and low sounds is more precise.Size:45*28mmPackage included3 x Two-way …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover KitRead More
Reviews
There are no reviews yet.