Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
220V-240V 300W Adjustable Submersible External Heater for Aquarium Fish Tank
$91.11Laboratory Heating EquipmentsAdd to cartDescription220V-240V 300W Adjustable Submersible External Heater For Aquarium Fish TankSpecificationsProduct Name::Aquarium External HeaterModel:EH-300:Color:BlackMaterial:ABS(Acrylonitrile Butadiene Styrene) PlasticPower:300WVoltage::220-240V, 50-60HzLength::31cmCable Length::130cmSuitable Tank:80-120cmPlug::US PlugFeatures-Easy installing and using.-Exquisite and compact design-save more space for you.-LCD display, Adjustable temperature between 20 to 35 degree.-External desigh, work together with filter bucket.-Automatically power off when no water flow inside, save on electricity costs …
220V-240V 300W Adjustable Submersible External Heater for Aquarium Fish TankRead More
10pcs 40 Pin 2.54mm Single Row Pin Header Curved Needle for Arduino – products that work with official Arduino boards
$6.55Electronic Accessories & SuppliesAdd to cartSpecificationPitch:2.54mmGender of connector:maleNumber of pin:40 PinType of row:SingleType of connector:CurvedPackage included10 x Single row curved header
10pcs CJMCU-3247 Current Turn Voltage Module 0/4mA-20mA Development Board
$58.04Expansion Board & ShieldAdd to cartDescriptionBrand:CJMCUSupply voltage:7 – 30 V DCInput current:0/4mA – 20mAOutput voltage:0 -24V MAX(Adjustable) Temperature drift:100ppm/CPackage included10 x CJMCU-3247 Current Turn Voltage Module 0/4mA-20mA Development Board
3pcs LC-EWL-1R-D80 WiFi Remote Relay Module Mobile APP Remote Control
$45.97Relay ModuleAdd to cartDescriptionWIFI module of on-board intelligent Internet of things is simple in configuration and powerful in function.Supports the remote control of incheasy micro-linkinch mobile phone APP through WIFI and 4G/3G/2G network.App control with mobile phone supports a variety of control modes such as timing, delay, device sharing, intelligent scene and so on.Real-time feedback of switching state …
3pcs LC-EWL-1R-D80 WiFi Remote Relay Module Mobile APP Remote ControlRead More
Reviews
There are no reviews yet.