600×448 5.83inch E-ink Display e-Paper HAT(B) for Raspberry Pi Red/Black/White Color SPI interface
$145.58
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600×448 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
More infor for you to know more
Features
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
Operating voltage:3.3V~5V
Interface:SPI
Outline dimension:125.40mm ≠ 99.50mm
Display size:118.80mm ≠ 88.26mm
Dot pitch:0.198 ≠ 0.197
Resolution:600 ≠ 448
Display color:red, black, white
Grey level:2
Full refresh time:14s
Refresh power:26.4mW(typ.)
Standby power
Viewing angle:>170
Interface
SYMBOL DESCRIPTION
VCC 3.3V~5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data/Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, low active
Explanation
1. Refresh time:This refers to the global refresh time, that is, the time it takes to refresh each frame of the image; if the ink screen itself supports partial refresh, the partial refresh time is about 0.3 seconds
2. Pi interface:based on the standard interface design, suitable for Raspberry Pi Zero / Zero W / Zero WH / 2B / 3B / 3B +
Package Included:(raspberry pi board not included)
5.83inch e-Paper (B) x1
e-Paper Driver HAT x1
RPi screws pack (2pcs) x1
PH2.0 20cm 8Pin x1
Weight | 0.143 kg |
---|
Customers Also Viewed
50pcs 3296W 50 ohm Trimpot Trimmer Potentiometer
$13.20Electronic Accessories & SuppliesAdd to cartSpecificationResistance:50 ohmPower (Watts):0.5W, 1/2W Tolerance:±10% Temperature Coefficient:±100ppm/°C Number of Turns:25 Adjustment Type:Top Adjustment Resistive Material:Cermet Mounting Type:Through Hole Termination Style:PC Pins Size / Dimension:9.53 x 4.83 x 10.03mmPackage included50 x Potentiometer
3pcs DC-DC 3V-35V To 4V-40V Step Up Power Module Adjustable Boost Converter Adjustable Voltage Board
$60.09Power Supply ModuleAdd to cartDescriptionInput Voltage:DC 3V-35VOutput Voltage:DC 4V-40V (continuously adjustable)Efficiency:94%(MAX)Size:L37mm*W32mm*H15mmWorking Temperature:-40-+85 degreesLoad capacity:Max 80WThe way of Connection:the connection terminal does not need to be soldered, the inchINinch is the input, and the inchOUTinch is the output.NoteWhen the output voltage is closer to the output voltage,the carrying capacity is higher,and the efficiency is also higher.Measurement reference tableInput voltage:Output voltage:Maximum …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mm
$28.42Power Supply ModuleAdd to cartParameterModel:S-120-12AC input voltage range:220VACInput current:0.5A/230VAC impulse current:Cold-start current 9A/230VDC output voltage:12VDC output power:120WRated output current:10AOutput voltage error:±1%Efficiency:85%Wave and noise:150mVp-pInlet stability:±0.5%Load stability:±0.5%Leakage currentOverload protection:105% – 150% rated power, automatically recoveryVibration:10500Hz,2G 10min./1cycle,Period for 60min,Each axesCooling method:Fan assisted cooling Working temperature and humidity:- 20 ° ~ 60 ° c / 20% ~ 90% RH (no frost)Store temperature and …
AC110V-240V to DC12V 10A 120W Switching Power Supply 187*45*35mmRead More
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool Pump
$91.11Electrical Pump & ValveAdd to cartFeatures-Small size, high energy, low noise, long life, AC / DC dual-use-With a belt buckle,easy to carry-Stable performance,strong volume-Built-in high quality rechargeable lithium battery,cycle life>=500 times-Less than 150mA ultra-low power,full power continuous supply of oxygen for more then 24 hours-External 5V power supply input,can simultaneously oxygen and charging,longer batter life-Using waterproof technology, effective protection of …
2.5W Oxygenator Air Pump Outdoor Solar Power Pond Aquarium Fish Tank Pool PumpRead More
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USB
$153.05Smart Robot & Solar PanelAdd to cartFeatures1.Using the third-generation Sunpower solar panels imported from the United States, the photoelectric conversion rate is as high as 23% ~ 25%, and there is electricity when there is light.2. Dual USB output, charging speed 5V / 2.9A.3. High light transmission, tough and aging resistant material, worry-free charging.4. The external net bag can hold mobile …
HAWEEL 28W High Power Portable Solar Folding Bag Charging Panel with Dual USBRead More
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster Demister
$113.39Temperature ControllersAdd to cartFeatures– Integrated heating and cooling, water heating system.– 4 Air outlet, 3 big fan, and 2 water pipe connections.– Use for defrosting, demisting, deicing.– Provide the comforts for travel, camping, glass defrost mist.– It can be installed at the bottom of the seat, next to the foot, or at any position on the car.– With …
12V 1500W Portable Car Truck Auto Heater Heating Cooling Fan Defroster DemisterRead More
EleksMaker EleksZAxis Z Axis & Spindle Motor Drill Chunk integrated Set DIY Upgrade Kit for Laser Engraver CNC Router
$186.29Engraving Parts & AccessoriesAdd to cartWhat’s the improvement EleksZAxis 2019 is not only a Z axis holder, but also equipped with a spindle motor and a drill chunk which means it’s a more powerful and ready-to-use integrated set.EleksMaker® 555 spindle motor gives this kit stable and qualified power source.Unlike the other loose shaft coupler, JT0 0.3-4mm drill chunk is more …
Reviews
There are no reviews yet.