CJMCU-35 LPS35HW Pressure Sensor Waterproof and Moisture-proof Height Sensor Module Absolute Barometer
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Introduction
LPS35HW is an ultra-compact piezoresistive, digital pressure sensor with output barometer.
The device includes a sensing element and an IC interface. The sensing element that communicates through IIC or SPI can detect absolute pressure. This digital sensor has low power consumption, current consumption as low as 3uA, and a wide measurement range from 260hPa to 1260hPa.
Parameter
Power supply voltage:1.7V-3.6V
High overpressure capability:20 times full scale
Communication interface:SPI and I2C interface
Interrupt function:data ready, FIFO flag, pressure threshold
Embedded temperature compensation
24-bit pressure data output
16-bit temperature data output
ODR from 1Hz to 75Hz
Embedded FIFO
Pin Description
VCC:Power terminal
GND:Ground
SCL:I2C serial clock
SPI:Serial clock
SDA:12C serial data
4-wire SPI serial data input
3-wire serial data input / output
SDO:4-wire SPI serial data output
The least significant bit of the I2C device address
CS:SPI enable, I2C / SPI mode selection
(1:SPI idle mode / 12C communication is enabled; 0:SPI communication mode / 12C disabled)
INT:Interrupt pin
Package includes
1 x Pressure sensor with pins
Application tips
The power supply must be provided through the VDD line, and the power decoupling capacitor C1 (100nF) must be placed as close as possible to the power pad of the device. Depending on the application, an additional 4.7uF capacitor can be placed on VDD.
Schematic diagram:
Weight | 0.003 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.