CJMCU-35 LPS35HW Pressure Sensor Waterproof and Moisture-proof Height Sensor Module Absolute Barometer
$28.42
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Introduction
LPS35HW is an ultra-compact piezoresistive, digital pressure sensor with output barometer.
The device includes a sensing element and an IC interface. The sensing element that communicates through IIC or SPI can detect absolute pressure. This digital sensor has low power consumption, current consumption as low as 3uA, and a wide measurement range from 260hPa to 1260hPa.
Parameter
Power supply voltage:1.7V-3.6V
High overpressure capability:20 times full scale
Communication interface:SPI and I2C interface
Interrupt function:data ready, FIFO flag, pressure threshold
Embedded temperature compensation
24-bit pressure data output
16-bit temperature data output
ODR from 1Hz to 75Hz
Embedded FIFO
Pin Description
VCC:Power terminal
GND:Ground
SCL:I2C serial clock
SPI:Serial clock
SDA:12C serial data
4-wire SPI serial data input
3-wire serial data input / output
SDO:4-wire SPI serial data output
The least significant bit of the I2C device address
CS:SPI enable, I2C / SPI mode selection
(1:SPI idle mode / 12C communication is enabled; 0:SPI communication mode / 12C disabled)
INT:Interrupt pin
Package includes
1 x Pressure sensor with pins
Application tips
The power supply must be provided through the VDD line, and the power decoupling capacitor C1 (100nF) must be placed as close as possible to the power pad of the device. Depending on the application, an additional 4.7uF capacitor can be placed on VDD.
Schematic diagram:
Weight | 0.003 kg |
---|
Customers Also Viewed
LED Light Lighting Kit ONLY for LEGO 60141 City Series Police Station Bricks Toy
$54.66DIY Electronic KitsAdd to cartDescriptionThe product is just a light kit, not included the model!!!Interface:USBColor:As the picture shownFitmentONLY For LEGO 60141 City Series Police Station Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
5V 8 Channel Level Trigger Optocoupler Relay Module
$19.67Relay ModuleAdd to cartDescriptionThe module uses genuine quality relay, normally open interfacesUsing SMD optocoupler isolation, driving ability, stable performanceThe module can be high or low by a jumper setting triggerFault-tolerant design, even if the control line is broken, the relay will not operateThe power indicator (green), the relay status indicator (red)The interface design of human nature, all interfaces …
5V 8 Channel Level Trigger Optocoupler Relay ModuleRead More
Transmitter Wireless Remote Control Switch 6V 4CH Channel 315Mhz
$8.73Smart ModuleAdd to cartNoteThis product does not supply any instructions, please reference the description.This version does not support copy code function, please note about this before you order it.FeatureVoltage:6VWorking frequency:315mhzExtremely easy to set up and useLearning face to face in secondsOnly copy of a fixed code, can not be copied rolling codeCovers application ranging from simple domestic remote …
Transmitter Wireless Remote Control Switch 6V 4CH Channel 315MhzRead More
DIY D880 Transistor Series Power Supply Regulator Module Board Kit
$6.55DIY Electronic KitsAdd to cartNote:This is a DIY kit, you need to assemble it, no instruction supply.SepecificationInput voltage:AC 12-17V (No direction)Output voltage:DC 8-14V (adjustable)Output current:500mABoard size:4.9 * 3.5cmPackage includes1 x PCB board2 x 9013 transistor1 x D880 transistor1 x 15 * 10 * 20mm heatsink1 x M3 * 6 screws2 x 3.96-2P pillars4 x 1N4007 diode1 x 0.5W 6.8V …
DIY D880 Transistor Series Power Supply Regulator Module Board KitRead More
Reviews
There are no reviews yet.