Multi-function infrared Remote Control 8 Channel Relay Module inching Switch/Self-lock Switch 5V/12V/24V Geekcreit for Arduino – products that work with official Arduino boards
$21.86
Version inching switch Voltage 5V / Version inching switch Voltage 12V / Version inching switch Voltage 24V / Version self-lock switch Voltage 5V / Version self-lock switch Voltage 12V / Version self-lock switch Voltage 24V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
1. Dual trigger design, using a dedicated bidirectional driver IC design
2. Strong anti-interference ability, using diode continuous current protection;
3. The contact part of the relay adopts double-sided thick wiring, which can pass through a large current, safe and reliable;
4. Using high-quality relays, optional 5V, 12V, 24V;
5. Both input and output adopt 5.08mm high-quality wiring terminals, making wiring more convenient and suitable for PLC control;
6. The input terminal can be set arbitrarily high and low level trigger, the control method is more flexible;
7. Each relay has a pull-in indicator light, the working status of the relay is clear at a glance;
8. Each relay output leads to two groups of normally open and normally closed electric shock, which is convenient and flexible to use;
9. With fixing screw holes for easy installation.
Specifications
Working voltage:5V / 12V / 24V DC
Dimensions:133 x 55 x 19 mm
Contact capacity:AC250V 10A DC30V 10A;
The product wiring is as follows
1.VCC:input power supply terminal
2.GND:Input power terminal ground terminal
3. CTR1-CTR8 is the signal input trigger terminal, which is valid in any mode (just set by jumper)
4. Use of the remote control:only the numeric keys work, the 1-8 keys correspond to the corresponding 1-8 channels of the relay. When pressed once, the relay works, and when pressed again, the relay turns off. When the 0 button is pressed, all work is performed, and when the 9 button is pressed, all are disconnected.
Package Included
1 x Multi-function Infrared Remote Control 8 Channel Relay Module
1 x Infrared Remote Controller
Weight | 0.125 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.