LC55B01 AC/DC 12V 30A Water Level Automatic Controller Aquarium Liquid Switch Relay Board for Solenoid Valve Motor Pump
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Features
1. AC / DC12V power supply, common voltage, convenient and practical.
2. Automatsc trigger, set the highest and lowest water level at will.
3. Widely used, can be matched with automatic control of solenoid valve pump motor.
4. With stable function and excellent quality.
5. Maxmum Load:30A / 250VAC, 30A / 120VAC, 30A / 30VDC.
Working Principle
1. The water level rises:When the water level is lower than the inchLow levelinch, the water pump starts to supply water to the water tower; when the water level is higher than the inchHigh levelinch, the water pump stops supplying water.
2. Water level reduction:When the water level is lower than the inchHigh levelinch, the water pump does not work and the water level continues to decrease. When the water level is lower than the inchLow water levelinch, the water pump starts to supply water to the water tower.
Specification
Item Type:Water Level Automatic Controller
Working Voltage:DC 12-15V (AC 9-12V)
Standby current 11MA
Working current 82MA
Size:Approx. 67 x 33 x 25mm / 2.6 x 1.3 x 1in
Weight:43 g / 1.5 oz(approx.)
Maxmum Load:30A / 250VAC, 30A / 120VAC, 30A / 30VDC
Application
Domestic water tower
Aquarium fish tank water change system
Automatic control of conductive liquid
Livestock automatic feeding system
Farm automatic water supply system
And other places requiring automatic water supply and water exchange.
Interface Description
HIGH:Upper limit probe
OUT:Output probe
LOW:Lower limit probe
IN+:Power terminal 1 (regardless of positive and negative)
IN-:Power terminal 2 (regardless of positive and negative)
NC:Relay normally closed contact
COM:Relay common contact
NO:Relay normally open contact
Note
1. The probe (wire) is not included in the package, no special probe is needed, and the probe can be made with household wire.
2. For safety, please use a well-isolated AC / DC power supply.
Package Included
1 x Water Level Automatic Controller Relay Board
Weight | 0.045 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.