Tone Version 50W*2 bluetooth 5.0 Audio Power Amplifier Board Module High and Low Bass Adjustment Subwoofer Dual Channel Stereo ZK-502T Hi-Fi
$41.54
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
Product name:50W Bluetooth audio power amplifier module with tone
Product model:ZK-502T
Bluetooth version:5.0 (unobstructed, 10 meters)
Signal to noise ratio:> 90dB
Input method:AUX + Bluetooth
Channel:Left and right dual channels (stereo)
Amplifier chip:TPA3116D2 (with AM interference suppression function)
Adaptable power supply:DC9 ~ 24V / 2A or more (the higher the voltage, the greater the output power)
Adaptable speakers:15 ~ 100W, 4 ~ 8┯
Output power:15W * 2 @ 12V, 8┯ / 30W * 2 @ 24V, 8┯ / 20W * 2 @ 19V, 8┯ / 30W * 2 @ 12V, 4┯ / 40W * 2 @ 19V, 4┯ / 50W * 2 @ 24V, 4┯
Protection mechanism:overvoltage, undervoltage, overheat, DC detection, short circuit protection
Product size:110mm * 70mm * 21mm
Product weight:154g (including packaging)
Prompt
Only when the audio input is sufficient and the power supply voltage / current is sufficient, will there be enough output power!
The higher the power supply voltage, the greater the output power, the smaller the speaker impedance, the greater the output power!
Please make sure that the power of the adapted power supply is greater than the actual working power of the amplifier!
Package includes
1 x Audio Power Amplifier Board kit
Question & Answer
Q1. How to choose the power supply
A:The power supply of the board is very important. The higher the voltage, the higher the current, and the greater the output power. If you only have 12V 1A, you can use a 3-4 inch speaker. If you are above 19V 5A, there is no problem with 8-10 inch speaker, the power supply must be highly valued. If the voltage is too low, the sound will be easily distorted after the sound is amplified. If the current is too small, the speaker will pull down the voltage, and will not work properly or the sound quality will deteriorate.
It is recommended to use 18V/19V/24V power supply, the current is more than 3A. If you only have a 9V/12V or 1A, 2A power supply, it can also be used but the power is small. Note that the maximum volume during use may be distorted and affect the sound quality.
Q2. How to choose speakers
A:The commonly used speakers are generally 8 ohms, and the positive and negative polarities can be distinguished. The effect is the same. 4 ohm speakers can also be used. If your speaker power is small, it may be usable between 10W-30W. The supply voltage is lower to prevent the speaker from being burned after the sound is amplified. For example, choose a power supply below 15V. If you are a 50W-100W speaker, you don’t need to worry about the problem of speaker burnout, you can choose a 12-24V power supply, the higher the voltage, the greater the output sound or power. Speaker power should not exceed 100W, otherwise it will affect the sound quality.
Q3. How to select the audio input mode
A:This audio power amplifier module follows the principle of hardware connection priority. USB connection is successful in USB mode, AUX plug-in is in AUX mode. If USB is not connected and AUX is not plugged in, it is Bluetooth mode, Bluetooth mode supports automatic connection back. There is a mode prompt tone when the mode is switched. When selecting the USB audio input mode, it should be noted that USB can be directly connected to devices such as computers with USB audio output, without installing a driver. USB input is lossless input, good sound quality, no interference, no noise.
Q4. The sound is okay. When the sound becomes louder, does the sound appear muddy
A:The sound is distorted. Please change the power supply of the adapter with higher voltage level.
Q5. It’s okay when the sound is small, but when the sound becomes louder, the sound freezes
A:There may be two reasons:1. Insufficient input power, intermittent power-off protection of the power supply itself, please replace with a larger power supply; 2. Too much power, the power amplifier board heats up seriously, and thermal protection occurs. Should reduce the use of power or strengthen heat dissipation.
Weight | 0.154 kg |
---|
Customers Also Viewed
3pcs 6mA 3-100CM Adjustable infrared Digital Obstacle Avoidance Sensor Module
$20.45Sensor & Detector ModuleAdd to cartSpecificationsWorking voltage:DC 3.8V-5.5VWorking current (5V):typical current 6mAInput and output signals (3 lines):GND, VCC is power, and VCC is 3.8V-5.5VObstacle detection time (range from obstacle-free to obstacle-free or obstacle-free to obstacle-free)Working Principle:Sensors actively emit infrared light, according to reflected light detection, if detected obstacles, OUT foot output 0, otherwise 1.Detection distance (test environment, indoor, maximum power, …
3pcs 6mA 3-100CM Adjustable infrared Digital Obstacle Avoidance Sensor ModuleRead More
60x90cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 4 Mesh
$74.87Mesh & Wire ClothAdd to cartDescriptionStainless Steel Woven Wire is widely used in stainless steel mesh screen filter and protectivedecorative, scope throughout the mining, petroleum, chemical, food, medicine, machinerymanufacturing, construction, decoration, electronics, aerospace and other industries.SpecificationMaterial:Stainless steelSize:60x90cmMesh:4Features– Acid and alkali resistance, good corrosion performance; high strength, tensile, toughness and wear resistance, durable;– High temperature oxidation– Normal processing, plastic processing that …
60x90cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 4 MeshRead More
5Pcs 2381BS 0.28 inch LED Digital Tube 3-digit Common Anode Bright Red Light
$5.18Electronic Accessories & SuppliesAdd to cartSpecificationType:0.28inch Three-digit digital tubeDimensions:22.53mm*10mm*7mm (length * width * thickness)Color:Red lightQuantity:5PcsPackage included5Pcs LED Digital Tube
3Pcs 15W TDA7297 Dual-Channel Amplifier Board
$22.42Amplifier BoardAdd to cart3Pcs 15W TDA7297 Dual-Channel Amplifier Board For Features AC / DC, 2.0 / dual channel / stereo,12V/2A when using, the output power of 15W +15 W, peak up 25W +25 W Can be accessed by two 4-8Ω 10-50W speakers A large volume of small size High signal to noise ratio Upgraded version of the radiator, …
5pcs 4S 16.8V BMS PCB 18650 Lithium Battery Charger Protection Board Balanced Current 100mA
$19.95Battery Protection ModuleAdd to cartFeatureName:Lithium battery balancing boardScope of application:3.7V Nominal voltage, 4.2V full voltage lithium battery (including 18650, 26650, polymer lithium battery)Size:20 x 30 x 2.4mmAdaptable voltage:16.8VBalanced current:100mA, suitable for 2000-4000 mah batteryNote:this product cannot be used instead of lithium battery protection board (not overcharge protection and discharge protection function)Package included5 x Lithium battery balancing board
UWB Ultra Wideband Antenna 2.4Ghz – 10.5Ghz Pulse PCB Antenna Module
$17.48Motherboard & Development BoardAdd to cartFeaturesThis is an improved UWB antenna, mainly used for ultra-wideband positioning, communication and so on.The antenna coverage frequency is 2.4GHz-10.5GHz, and the standing wave is usually less than 2.5.The antenna is characterized by small size and high efficiency.Ultra-wideband UWB antenna, high transmission rate.UWB pulse forming technology, a worthwhile antenna for you.SpecificationMaterial:PCBColor:as picture shownWorking frequency:2.4GHz-10.5GHzPolarization mode:vertical …
UWB Ultra Wideband Antenna 2.4Ghz – 10.5Ghz Pulse PCB Antenna ModuleRead More
Reviews
There are no reviews yet.