CJMCU-MLX90614 BCC Human Body infrared thermometer Non-contact thermometer Serial Output Module
$87.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
CJMCU-90614 is a low-cost infrared temperature module.
Working voltage 3-5v Low power consumption and small size.
Its working principle is to read infrared temperature data through single chip microcomputer, serial port (TTL level)
Communication mode output (the baud rate can be set):the baud rate of the serial port is 9600bps, 57600 and 115200bps
There are two ways of continuous output and query output, which can adapt to different working environments and connect with all single chip computers and computers.
Object distance ratio:1.6:1
letter of agreement
Serial communication parameters (default baud rate value is 115200 bps, which can be set by software)
Baud rate:9600 bps Check digit:N Data bit:8 Stop bit:1
Baud rate:57600 bps Check digit:N Data bit:8 Stop bit:1
Baud rate:115200 bps Check digit:N Data bit:8 Stop bit:1
Module output format
Instruction length:9
Data output format
Byte1 frame header logo 0x66
Byte2 frame header logo 0x66
Byte3 data output mode (0x01 continuous output; 0x02 query output, default is continuous output mode)
Byte4 measurement data length (counted by Byte)
Byte5 data 1 high 8 bits
Byte6 data 1 low 8 bits
Byte7 data 2 high 8 bits
Byte8 data 2 lower 8 bits
Byte9 data parity bit (all 8 bits of data are accumulated)
Data calculation method
Temperature = 8 bits of data high
Command instruction (send to MCU, set various parameters)
Byte1 frame header logo 0x66
Byte2 frame header flag 0x66
Byte3 setting command
0x01 continuous output mode
0x02 query output mode
0x11 Set baud rate to 9600
0x12 Set the baud rate to 57600
0x13 Set the baud rate to 115200
Byte4 end of frame flag 0x56
Instructions
The module outputs data for the serial port, connect the module to the power supply, connect the serial port (the default is 115200 baud rate, continuous transmission mode), and the serial port outputs directly. If you want to change the sending method, you can send the command 66 66 02 56 to the module, and then send the command every time, the module will return the temperature data once. If you want to change the baud rate to 9600, you can send 66 66 11 56 to the module. If you want to change the baud rate to 57600, you can send 66 66 12 56 to the module.
Note:No MCU source code is provided
Package includes
1 x Sensor board with pins
Weight | 0.002 kg |
---|
Customers Also Viewed
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe Aerogenerator
$1,101.59Alternative Energy GeneratorsAdd to cartFeaturesStarting wind speed is low, high wind energy utilization, small size, good looks, low operating vibration.User-friendly design:convenient equipment installation, maintenance and repair.Using high-power tracking intelligent microprocessor control, effective regulation of current and voltage.The shell is made of aluminum alloy die-casting, with double bearing carrier, strong anti-typhoon capacity, safe and reliable operation.The wind wheel and blade …
700W 5 Nylon Fiber Blades Wind Turbine Power Generator DC 24V Safe AerogeneratorRead More
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar Panel
$39.69Smart Robot & Solar PanelAdd to cartOn the use and testing ofProducts can only be in the sun, the nominal peak power is the midday sun, the sun early in the morning one night and not the strong sun is not up to the nominal, buyers pay attention to this point and in the light! inside the room, the solar panels …
10PCS 6PCS 6V 100mA 0.6W Polycrystalline Mini Epoxy Photovoltaic Solar PanelRead More
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module Board
$6.55Power Supply ModuleAdd to cartFeatureInput voltage 0.9-5V; output voltage 5VMaximum output current:480MaStarting voltage 0.8V, output current 7MAInput 1-1.5V, output 5V 40-100MAInput 1.5-2V, output 5V 100-150MAInput 2-3V, output 5V 150-380MAInput more than 3V, output 380-480MAOperating frequency:150KHZTypical conversion efficiency:85%Pin 2.54MM spacingSize:11mm x 10.5mm x 7.5mm (very small)Weight:about 1 gNote1. the input voltage is not greater than the nominal voltage, otherwise it …
1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V To 5V DC-DC Boost Converter Module BoardRead More
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for Generator
$25.31Module ComponentsAdd to cartDescriptionAC 80-300V/30-70HZ 3in1 LCD Time Voltage Frequency Combo Meter For GeneratorVoltage and frequency can easily determine accurate display.Equipment long life, with power outage to save the cumulative time, can be stored for up to 20 years.SpecificationResolution:1VDisplay mode:LCDResolution:0.1hzWorking voltage:single phase:AC 80-300VFrequency measurement range:30-70HzWorking conditions temperature:-20 – 70→Working life:More than two yearsApplicationVoltage monitor, Generator Sets, industrial control …
AC 80-300V 3in1 LCD Time Voltage Frequency Combo Meter for GeneratorRead More
LCR-T4 Transparent Plastic Shell Clear Protective Case for Graphical Transistor LCR Tester Multifunctional Transistor Tester
$7.01Module ComponentsAdd to cartFeatureNet weight:93.6gSize:11.3*8.7*1.7cmNote:For LCR-T4 Graphical Transistor LCR Tester only (Product ID:1311439)The Tester is not includes.Package includes1 x LCR-T4 Transparent Plastic Shell kit
Reviews
There are no reviews yet.