3pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$23.57
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
3 x PWM signal generator
Weight | 0.057 kg |
---|
Customers Also Viewed
3Pcs MB102 Test Developer DIY 830 Hole Solderless PCB Breadboard
$17.32Electronic Accessories & SuppliesAdd to cart3Pcs MB102 Test Developer DIY 830 Hole Solderless PCB BreadboardDescription1 terminal Strip, tie-point 6302 Distribution Strips, tie-point 200Solderless breadboard (MB-102)Wire size:Suitabe for 29-20 AWG wiresSize:About 16.5*5.6*1 cmNote:May has different types random delivery.Package included3 x MB102 Breadboard 830 Hole Solderless PCB
Laser Ceramic Body 28mm Fiber Laser Cutting Machine Head Nozzle Holder Ceramic Ring Parts
$27.89Engraving Parts & AccessoriesAdd to cartSpecificationMaterial:CeramicDiameter:28mmHeight:12mmThe installation type:Internal thread connectionApplication:Fiber laser cutting machinePackage Included1 x Laser Ceramic
MTOLASER PCA-K Pillar Limiter Lens Frame Elevating Set Optical Adjustment Laser Module Holder
$15.27Engraving Parts & AccessoriesAdd to cartDescriptionThe PCA-K pillar limiter elevating set is designed to locate the position of the adjusting rod, which can easily realize the fine-tuning of the optical path calibration without any other optical elements.SpecificationBrand:MTOLASER Model:PCA-KMaterial:Aviation AluminumMain Color:Black + SilverInstallation Diameter:12mm ColumnSize:22mm x 12mmFeatures1. The pillar limited elevating set is designed to locate the position of the adjusting …
Metal Film Resistor Assortment kit LED Diodes Electrolytic Capacitor Ceramic Set Transistor Plastic Bag Package DIY Electronic Components Kits
$32.79Electronic Accessories & SuppliesAdd to cartLED diodes:100pcs LED Assorted KitWhite 5mm 20pcs 3V-3.2V 20mARed 5mm 20pcs 1.8V-2V 20mAGreem 5mm 20pcs 1.8V-2V 20mAYellow 5mm 20pcs 2V-2.3V 20mABlue 5mm 20pcs 3 V-3.2V 20mAWhite 3mm 20pcs 3V-3.2V 20mARed 3mm 20pcs 1.8V-2V 20mAGreem 3mm 20pcs 1.8V-2V 20mAYellow 3mm 20pcs 2V-2.3V 20mABlue 3mm 20pcs 3 V-3.2V 20mAResistance package600pcs 30 values Metal Film Resistor Kit 10R-1M …
1CH Channel Ethernet Relay Network Switch TCPUDP Module Controller with 1 Digital input
$57.38Network ModuleAdd to cartFunction descriptionControl the pull-in and release of 1 relay through the Ethernet network, with a shell. The module supports both TCP and UDP two operation modes, the instructions are simple and easy to understand, and the jog and 1-65535 seconds delay can be specified in the instruction. The module is equipped with VB, host computer …
1CH Channel Ethernet Relay Network Switch TCPUDP Module Controller with 1 Digital inputRead More
STC89C52 DIY Learning Board Kit Suit the Parts 51/AVR Microcontroller Development Board Learning Board
$13.11DIY Electronic KitsAdd to cartThis board to 51 interface designed for platform double reset circuit, the monolithic support are1, On STC series such as STC89, STC11, STC12, STC90 DIP encapsulation (40 feet). Need to download a program via a serial port (COM).2, The AT89S series such as AT89S51 and AT89S52 devices such as DIP encapsulation (40 feet). Need to …
1/2 inch Micro Water Filter Purifier Stainless Steel Front Facing Wire Mesh
$17.00Mesh & Wire ClothAdd to cartDescriptionMicro Water Filter Purifier Stainless Steel Front-facing Wire MeshSpecificationMaterial:PlasticSize:as the picture shows(Pls allow 1-3mm measurement error)FeaturesStrict processConvenient in usePackage include1 x Water Filter Parts
Reviews
There are no reviews yet.