10pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$75.25
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
10 x PWM signal generator
Weight | 0.19 kg |
---|
Customers Also Viewed
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel Tool
$56.69Mesh & Wire ClothAdd to cartSpecificationsColor:White+blueMaterial:ABSSize:49×31.5cm / 19×12′Deepth of net:52cm / 20′Fits for:Extension poles of the diameter of 3cm/1.2′Feature– Making cleaning and maintaining the pool simple, fast, and convenient, for safe and sanitary.– Spring-loaded locking clips on the handle to attach extension poles.– Deep bag and fine-mesh are great for grabbing dirt and small debris from the pool bottom.– Made …
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel ToolRead More
18650 Battery Box Rechargeable Battery Holder Board with Switch for 2×18650 Batteries DIY kit Case
$4.36Other Module BoardAdd to cartSpecificationsNumber of sections:2Uses:for 18650 battery (without battery)With switch:YesSize:42*22*90mmCable:15cmPackage Included1 x 18650 Battery Box Rechargeable Battery Holder
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit Breaker
$18.21Switch AccessoriesAdd to cartSpecificationsName:Overload ProtectorBrand:KUOYUHRated current:25ARated Voltage:125/250V AC, 32V DC, 50-60HZBreak capacity:1000A x 125V AC, 200A x 250V ACPressure ability:1500V AC for 1 minute, the leakage current is less than 0.5mAMinimum Voltage:less than 0.25VReset time:within 60 secondInsulation resistance:500V DC continuous for 5S, the insulation resistance will be more than 100MΩWeight:35gCertificate:UL,CSA,VDE, RoHSFeatures– When the load exceeds the rated current, …
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit BreakerRead More
Quick Charge 3.0 DIY Power Bank 18650 Battery Case QC3.0 5V 9V 12V DIY Kit Power Bank 2A 18650 Battery Fast Charger Shell
$25.14Module ComponentsAdd to cartNote1. Please Use flat-headed 18650 DIY2. If use the old battery,pls test the voltage,more than 3.5v and the Internal resistance less than 60 .3. It can’t use the flashlight 18650 battery4. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board5. Don’t close the cover until the test is …
3pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$6.87Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
Mini-Whip MF/HF/VHF SDR Antenna Miniwhip Shortwave Active Antenna for Ore V6N7
$56.85Motherboard & Development BoardAdd to cartDescriptionAccessory Type:USB To DC CableCompatible With:HackRF RTL-SDRColor:greenMaterial:metal + pcProduct DescriptionEffective bandMedium waveShortwaveUltrashort waveApplicable environmentIndoorOutdoorVoltage range:9V-15VPackage includes2 x Antenna2 x Module1 x Power cable
5pcs W1701 12V DC Digital Temperature Controller Switch thermostat Adjustable thermostat Temperature Switch Cooling Controller
$41.51Sensor & Detector ModuleAdd to cartSpecificationModel:W1701Size:Approx. 36.5×36.5×18 mm/1.44×1.44×0.71 inchInstallation screw:M3 * 2 diagonal size 39.5mmTemperature range:20-90 °Control Mode:Heating, Cooling, Heat dissipationControl Accuracy:0.1 °Hysteresis Setting:1-10 °Refresh Rate:0.5SSupply Voltage:DC 12VOutput Voltage:DC 12VOutput Power:Max 200WStatic Current:≤ 3MA, attract current ≤ 60MATemperature Probe:10K thermistorB25 = 10K 395030cm Waterproof SensorEnvironmental Requirements:-10 ~ 60 °Humidity 20% -85%Can be used in the (liquid, mold, space) and other …
Reviews
There are no reviews yet.