10pcs Dual 2 Mode PWM Square Rectangular Signal Generator Control DC Stepper Motor Driver Board Adjustable Pulse Module
$75.25
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. PWM signal generator, square rectangular signal generator
2. Used to generate square rectangular signals for controlling DC motor or stepper motor driver; used for servo motor, stepping motor, electric gripper, replacing PLC pulse, etc.
3. The supporting driver realizes dimming, speed regulation, control of solenoid , etc., but can not directly drive the load of the electric motor solenoid .
Product Highlights
1. Two modes can be selected
PWM mode – frequency (continuous), duty cycle, pulse number adjustable;
PULSE pulse mode – positive pulse width time, negative pulse width time, delay start time, and the number of pulses are adjustable.
2. With start and stop button, can control the output and stop of the signal
3. Wide voltage input 3.3-30V, with anti-reverse protection, 5.08mm terminal wiring
Technical parameters
1. Working voltage:3.3~30V, with anti-reverse protection
2. Frequency:1Hz~150KHz, accuracy about 2%
3. Duty cycle:0-100%, 1% stepping
4. Number of pulses:1-9999, or infinite (display ‘—-‘ stands for infinity)
5. Delay output time:0.000s-9999s, the can be set 1ms
6. Positive and negative pulse width length:0.000s-9999s, the can be set 1ms
7. Signal loading capacity:less than 30mA
8. Output signal amplitude:amplitude is equal to the supply voltage
9. Product size:60 x 32 x 10mm
10. Product Weight:18g
11. Packing:Anti-static bag
PWM mode (display has ‘%’ for PWM mode)
1. The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays “OUT” mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to switch to PULSE pulse mode, long-press the SET button (more than 6 seconds), do not release, you will see the screen change, ‘%’ disappears, it is PULSE mode.
2. PULSE pulse mode (No ‘%’ on the right side of the display is displayed in PULSE mode)
The P+ and P- buttons set the positive pulse width time, the LCD screen shows up, the N+ and N- buttons set the negative pulse width time, the LCD screen displays downwards, the unit is seconds; short press the STOP button to control the signal output or stop, stop output It is 0, the screen displays “OUT” mark as output, otherwise it stops output; the default factory positive pulse width is 0.5 second, and the negative pulse width is 0.5 second.
Pulse number and delay time setting – In PULSE mode, press and hold the SET button for 2 seconds and then release, enter the pulse number and delay time setting interface, the screen displays SET, it will be turned off and cleared after entering. Output pulse; P+ and P- buttons set delay time, N+ and N- buttons set pulse number, factory default delay time is 0 seconds, pulse number is infinite (display —-); Press the button for 2 seconds, automatically return to the pulse interface, press the STOP button, after the delay setting time, start to send the set number of pulses, if the number of pulses is sent, it will automatically output 0, if the period is not sent, press the STOP button. The output pulse will be turned off and cleared, and the number of pulses set will be issued each time it is started.
Application Operation Examples
1. PWM output 20KHZ, 60% duty cycle:Select PWM mode, the frequency is set to 20.00, and the duty ratio is set to 060%.
2. The output is turned on for 0.6 seconds and turned off for 0.2 seconds. Infinite loop:select PULSE mode, the positive pulse width is set to 0.600, the negative pulse width is set to 0.200, the delay time is set to 0.000, and the number of pulses is set to — -.
3. Power on or press the start button, delay 5 seconds, then the output is turned on for 0.6 seconds, off 0.2 seconds, infinite loop:select PULSE mode, positive pulse width is set to 0.600, negative pulse width is set to 0.200, delay The time is set to 5.000 and the number of pulses is set to —-.
4. Power on or press the start button, delay 5 seconds, then output high level 10ms low level 10ms pulse 100:select PULSE mode, positive pulse width is set to 0.010, negative pulse width is set to 0.010, delay The time is set to 5.000 and the number of pulses is set to 0100.
5. Power-on delay for 10 seconds, then permanently output signal:select PULSE mode, the positive pulse width is set to a number greater than 0, the negative pulse width is set to 0, the delay time is set to 10.00 seconds, and the pulse number is infinite. (—-).
6. Other applications can explore or consult customer service
All setup parameters are not lost when they are turned off.
Package includes
10 x PWM signal generator
Weight | 0.19 kg |
---|
Customers Also Viewed
JT-180 1.4W 7V Solar Panel Power Fountain Pump Outdoor Garden Pond Pool Submersible Water Pump Kit
$64.79Electrical Pump & ValveAdd to cartSpecificationsModel:JT-180Materail:Monocrystalline silicon+ABSSolar battery:7V,1.4WSolar battery:110mm*110mm/4.3inch*4.3inchThe power of pump:DC7V 1.4WMax flow pump:200L/hMax.water height of pump:75cm(Max,water-jet height:50cm)Life time:≥15000HoursFeatureThis product has the lowest rate of the power of solar battery to pump power,and it is not only very easy to operate the brushless motor under little sunshinelike the brush motor,but also, it has the much long life time than …
5pcs 220V XH-W3003 Micro Digital thermostat High Precision Temperature Control Switch Temperature Alarm
$68.61Sensor & Detector ModuleAdd to cartFeatureProduct Name:Microcomputer Temperature ControllerProduct model:XH-W3003Temperature range:-50~110°CTemperature control range:-50~110°CTemperature measurement accuracy:+-0.1 °CTemperature control accuracy:+-0.1 °CTemperature probe:1 meter waterproof probeSupply voltage:AC110-220VOutput power:AC220V:1000WOutput type:Direct outputOutput currentAppearance size:60 x 45 x 31mmOpening size:73mm (aperture 4mm)Features:Setting methodHigh temperature alarm (range:-50~110°C):For example, if you want to alarm when the temperature exceeds 20 °C, set the upper limit temperature to 20 °C …
30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2Pcs DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009 Module Suitable for Solar Panel
$8.87Boost & Buck ModuleAdd to cartDescriptionsAuto start voltage will be pulled down to 7V or less, and engine will at high speed when the voltage up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck boost module can solve this problem, regardless of the input voltage is 5V or 12V or 32V, the …
5 Pcs Blue Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$56.17Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included5* Blue Acrylic Case Kit
5pcs 0.5A 3S Synchronous Buck Li-Ion Charger DC 5-23V to 4.2V 8.4V 12.6V Power Supply Module for 3.7V 7.4V 11.1V 18650 Lithium Battery
$32.85Power Supply ModuleAdd to cartDescription3-Cell(3S) 12.6V VersionInput voltage:DC 14.8-23V(Recommend DC 14.8V/15V/18V)Charging voltage:12.6VCharging current:0.5ALed indicatorBright:Charging Off:full blinking:almost full; If the charging current is too large (or the battery capacity is small), it will quickly enter the flashing state, and the charging current should be reduced.Operating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30*15*5.5mmWeight:2gApplicationsCellular TelephonesPDA, MP3 Players, MP4 PlayersDigital CamerasBluetooth ApplicationsGame PlayersNotebookli-on …
15W 18V Semi Flexible Solar Panel with 5V USB Port & Cables
$58.36Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power (Pmax):15wMaximum Power Voltage (Vmp):18VMaximum Power Current (Imp):1.2aThe Number of Cells:36 PCSOutput:USB 5V & DC 18VSize:435 * 200 * 2.5 mmFeaturesLightweight and easy to carry.The charging temperature is -20-70 degrees Celsius.Flexible solar panel, maximum bending 30 degrees arc.Short circuit and surge technology keeps you and your equipment safe.Durable, waterproof.Packing Included1 x solar panels1 x …
15W 18V Semi Flexible Solar Panel with 5V USB Port & CablesRead More
DPX6005S Digital CNC Adjustable DC Power Supply 0-60V/32V 5A/3A 48V24V12V Step-down Board with LCD Display
$82.94Power Supply ModuleAdd to cartFeaturesIt is a fully CNC programmable step-down power supply with small size, high power, high efficiency and stable operation. It adopts a 1.8-inch TFT color liquid crystal display to provide comprehensive and clear display data. The power supply is controlled by an advanced microprocessor and can be precisely adjusted. And display voltage and current; using …
Reviews
There are no reviews yet.