5pcs ESP-12F AC/DC Power Supply ESP8266 AC90-250V/DC7-12V/USB5V WIFI Single Relay Module Development Board
$70.21
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. On-board mature and stable -12F WIFI module, large capacity 4M Byte Flash
2. The I / O port and UART program download port of the WiFi module are all exported, which is convenient for secondary development.
3. On-board AC-DC switching power supply module, power supply mode supports AC90-250V / DC7-12V / USB5V
4. On-board WIFI module RST reset button
5. -12F supports the use of development tools such as Eclipse / for Arduino IDE, and provides reference programs under the for Arduino development environment.
6. One 5V relay on board, output switching signal, suitable for controlling load with working voltage within AC250V / DC30V
7. Onboard power indicator, 1 programmable LED and relay indicator
Function
1. L, N:AC90-250V power supply
2. AC90-250V to DC5V switching power supply (Do not touch here directly with your hand when using AC power supply !!!)
3. VCC, GND:DC7-12V power supply;
4. USB:DC5V USB power supply;
Note:AC90-250V, DC7-12V, DC5VUSB can be selected as one of the three power supply methods.
5. 6X6mm button:8266 reset button;
6. UART program download port:GND, RX, TX, 5V of 8266 are connected to GND, TX, RX, 5V of the external TTL serial module rectively. IO0 must be connected to GND when downloading, and then disconnected connection;
7. GPIO pin out port;
8. Relay output
Normally closed end, the relay is short-circuited to COM before pull-in, and suspended after pull-in;
COM:public end;
NO:Normally open, the relay is suspended before the pull-in, and shorted to COM after the pull-in.
9. Power indication LED;
10. Programmable LED;
11. Relay Indication LED:Lights up during pull-in.
Introduction to GPIO terminal
Number:Name:Function:Number:Name:Function
1:GND:Power ground:13:IO10:GPIO10
2:Relay:The relay drive port is driven by IO5 by default. If you want to use other I / O to drive the relay, you can remove R14, and then connect the I / 0 of the drive relay to this Relay pin:14:MISO:Slave output input
3:IO2:GPIO2; UART1_TXD:15:IO13:GPIO13; HSPI_MOSI; UART0_CTS
4:IO4:GPIO4:16:IO14:GPI014; HSPI_CLK
5:RX:UART0_RXD; GPIO3:17:ADC:A / D conversion result. Input voltage 0 ~ 1V, value:0 ~ 1024
6:3V3:3.3V power supply:18:3V3:3.3V power supply
7:SCLK:clock:19:MOSI:output Slave input
8:IO15:GPIO15; MTD0; HSPICS; UART0_RTS:20:IO9:GPIO9
9:IO0:GPIO0:21:CS0:Chip Select
10:IO5:GPIO5:22:IO12:GPIO12; HSPI_MIS0
11:TX:UARTO_TXD; GPIO1:23:IO16:GPIO 16
12:5V:5V power supply:24:GND:Power ground
Package includes
5 x Development Board
Weight | 0.2 kg |
---|
Customers Also Viewed
10pcs Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp Wardrobe LED Lights
$32.97Sensor & Detector ModuleAdd to cartSpecificationsTotal power _ ≤ 72WInput voltage:5-24V (DC)Output voltage = input voltageOutput form:switch + indicatorSensing distance:30-80MMDelay time:no sweeping on/offInduction principle:infrared distanceScope of application:DC constant voltageLoad current resistance:3AStandby current:10-15mASize:142 x 12 x 7.9MPackage Included10 x Hand Sweep Wave Sensor Switch Module for 5V 12V 24V 72W Cabinet Lamp
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping Wrapping
$60.74ConnectorsAdd to cartDescriptionThe WSU 30M wire tool can be wraps, unwraps and even strips the appropriate wire diameter with a unique built-in stripper blade.SpecificationType:WSU-30MWire Gauge:30 AWG (0.25 mm)Maximum Insulation Diameter:0.021inch (0.53 mm)Terminal Hole Dia:0.036inch (0.91 mm)Terminal Hole Depth:1.50inch (38.1 mm)Outside Diameter:0.125inch (3.2mm)Wrap Post Size:0.025 Inch (0.63 mm)Weight:0.076 lbs (34.47g)Functions:Wrap, Unwrap, StripFeatures-Widely used for bench, tool kit and …
WSU 30M Wire Wrap Tool 30 AWG Strip Unwrap Hand Tools for Cable Prototyping WrappingRead More
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with Remote
$21.86Smart ModuleAdd to cartSpecificationsInput Voltage:DC10-14VStandby CurrentRF Frequency:433MHZRF Working mode:Super heterodyne receiverReceiver Sensitivity:>98dBmRemote Control Distance:>100 meter(In open environment)Decoding Way:MCU Software decodingCan store the number of remote control:50Support remote control type:Fixed code, learning codeChannel:4CHMultiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)Wiring Method:Fixed wiring terminalWorking Voltage:DC12VOutput Current:10AOutput:Normally open,Common,Normally closedSize:50x70x25mmHow to use1. Jog/Non-Latched:Press one button is Working /ON. Loosen your finger on the …
10A Relay 12V 4CH Channel 433MHZ Wireless Remote Control Switch Receiver Board with RemoteRead More
730 Holes Transparent Breadboard Protoboard DIY Kit Universal PCB Circuit Board Solderless
$8.73Electronic Accessories & SuppliesAdd to cartDescriptionSuitable for line prototypingABS plastic panel, tinned phosphor bronze contact pieceCan be used with 20-29AWG wireVoltage / current:300V / 3-5APackage included1 x 730 Holes Transparent Breadboard
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse Sensor
$41.31Sensor & Detector ModuleAdd to cartDescriptionThe pulse sensor is a sensor used to test the heart rate. Students, artists, athletes, creators, games or mobile terminal developers can develop interactive works related to heart rate. The sensor can be worn on a finger or earlobe and connected to the Ard via a wire. It also has an open source app that …
10pcs Pulsesensor Pulse Heart Rate Meter Sensor Module for Pulse SensorRead More
Geekcreit UNO R3 ATmega328P Development Board for with Housing for
$13.20Motherboard & Development BoardAdd to cartNote No USB cable version This version can not compatible with OS system Features Open the original schematic design, free development software interface download, also allow your needs to be modified, easy and convenient to download the program. Can simply use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons and …
Geekcreit UNO R3 ATmega328P Development Board for with Housing forRead More
3pcs SMA-F Receiver Mini 1:9 Antenna HF Balun G10-003 for 160m-6m Amateur Frequency Bands SGA998
$25.03Smart ModuleAdd to cartDescriptionsConnector:SMA femaleTotal size:about 39.2mmx13.0mm (including connector)Weight:about 5gMaximum input power:+28dBmFeaturesIt is mainly designed for 160m-6m amateur bands;Fully assembled, and easy to use.Excellent specifications & low insertion loss.Package Included3 x SMA-F Receiver Mini 1:9 Antenna
Reviews
There are no reviews yet.