1000*515*3MM Flexible Solar Panel Cell Module Kit for 12V/24V RV/Car/Boat Waterproof
$182.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description
Technology:ETFE Technology
Colour:Black
Single Crystal Power:200W
The Output Voltage:18V
Size:1000 * 515 * 3MM
Working Current:4.95A
Working Temperature:20 → – + 70 →
Process Material:ETFE + EVA + CELLS + EVA + TPT + EVA + TPT
Power Generation:Garage power generation 12V system (connecting 2 boards together can be used for 24V system)
Features
-Waterproof special cable, with sealing joint.
-Light and bendable, 30 bending for components.
-Imported frosted surface, more than 15 years aging life.
-Waterproof junction box with diode protection to prevent short-circuit and countercurrent lightning overpressure.
The ETFE surface is resistant to dirt and easy to clean; 3mm thickness is ultra-thin and flexible; UV-resistant and anti-aging; light transmittance is up to 95%.
Car Roof Installation Method
1. Use 3M double-sided foam adhesive with high temperature resistance and strong adhesion to the back of the solar panel, and then stick it to the position where the car roof is to be installed.
2. Paste with solar special sealing silicone (high temperature resistance, anti-aging, and stick to firm).
3. To install solar panels on the car roof, the wire should be introduced into the car. The wire can be inserted from the place where there is a gap on the outside of the car. You can enter the car from any closed place on the car roof (doors, sunroof, travel warehouse, starting compartment).
4. It can be directly connected to the battery in the starting compartment of the car.
5. Connected to the lighter. Note:Some car key switches lock the lighter and the power is turned on, and the car key cannot be charged to the battery from the lighter.
6. Just connect the bulb wire in the car or other wires connected to the battery.
Package included
1 * Flexible Solar Panel Photovoltaic Panel
Note
1.If you have any problems or concerns, please contact us.
2.Please allow 1-3cm measuring deviation due to manual measurement.Thanks for your understanding.
3.Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
4. Even if the solar panel is bendable, please do not over bend it to damage it with a rabbit
5. It is recommended to keep the solar panel clean and dry during use to achieve the best power generation efficiency.
Weight | 2.6 kg |
---|
Customers Also Viewed
5pcs DD2712SA 3.5A Mini 5V-27V to 3.7V DC DC Step Down Buck Power Converter Module Voltage Regulator
$22.52Boost & Buck ModuleAdd to cartDescriptionInput voltage:5-27VOutput voltage:5V Maximum output current:2.5AShort time maximum output current:3.5A Quiescent current:about 250uAWorking frequency:900KHz.Working efficiency:77-92% Size:25 x 15 x 6.3 mmOvertemperature shutdown, Under-Voltage Lockout (UVLO), BS-voltage protection, and short circuit protection.Note1. Input voltage can not be greater than the maximum input range.2. Output power can not be greater than the maximum load for a long …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night Vision
$34.43Raspberry Pi & Orange PiAdd to cartFeatures– This is the new version, can replace the infrared lamp or white fill light, the effect is great.– The Raspberry Pi Camera Board Features a 5 million pixels– And also supports 1080p @ 30 fps, 720p @ 60 fps and 640*480p 60/90 video recording.– OmniVision 5647 sensor in a fixed focus module.– The module …
1080P 5MP 160 Fish Eye Surveillance Camera Module for Raspberry Pi with IR Night VisionRead More
STM32H743VIT6 STM32H7 Development Board STM32 System Board M7 Core Board TFT interface with USB Cable
$58.95Motherboard & Development BoardAdd to cart>>>STM32H750VBT6 Manual:Click here to open>>>STM32H743VIT6 Manual:Click here to openhttp://myosuploads3.hobbyant.com/products/20200410/20200410051631STM32H750HAL-1909.rarhttp://myosuploads3.hobbyant.com/products/20200410/20200410020657STM32H743HAL-1909.rarSpecificationsFrequency:400M (M7 core)Package:LQFP100RAM:1024KBFlash:H750VB:128KB H743VI:2048KB (2M)OLED interface – plug and play, support 0.96 inch / 1.3 inch OLED TFT liquid crystal interfaceConnect 1.3 inch HD full color LCDConnect 2.0 inch HD full color LCD Data storage:W25Q64 (QSPI driver)High speed crystal:25MHZLow frequency crystal:32.768KPower + programmable LED lights2 users and …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car Truck
$99.21Switch AccessoriesAdd to cartSpecifications Material:Aluminum+ABS+Acrylic Power:DC(10-15V) 12V Professional Reads Range:-1~2 BAR Light Colour:White + Red Diameter:2.5 Inch /60mm Packing Size:15 x 8 x 11cm Features 270 degree sweep. Illuminated red needle display. LED Backlight display between white and red light are switched by the button. When the pressure alarm, peak light becomes red, the pressure alarm point can …
2.5 inch 60mm LED Turbo Boost Gauge Vacuum Press Pressure Bar Dials Meter for Car TruckRead More
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE Module
$28.46Other Module BoardAdd to cartDescriptionJDY-16 Version supports(WeChat, APP, Android) Transparent, IO, RTC, PWM and other functions1.BLE high speed transparent transmission supports 8K Bytes rate communication2.Send and receive data without byte limit, support 115200 baud rate often send and receive data3.Support 3 modes of work4.Support(serial port, IO, APP) sleep wake up5.Support Wechat Airsync, Wechat applet and APP communication6.Support 4 channel …
5pcs JDY-16 bluetooth 4.2 Module Low Power High Speed Data Transfer Mode BLE ModuleRead More
Reviews
There are no reviews yet.