1000*515*3MM Flexible Solar Panel Cell Module Kit for 12V/24V RV/Car/Boat Waterproof
$182.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description
Technology:ETFE Technology
Colour:Black
Single Crystal Power:200W
The Output Voltage:18V
Size:1000 * 515 * 3MM
Working Current:4.95A
Working Temperature:20 → – + 70 →
Process Material:ETFE + EVA + CELLS + EVA + TPT + EVA + TPT
Power Generation:Garage power generation 12V system (connecting 2 boards together can be used for 24V system)
Features
-Waterproof special cable, with sealing joint.
-Light and bendable, 30 bending for components.
-Imported frosted surface, more than 15 years aging life.
-Waterproof junction box with diode protection to prevent short-circuit and countercurrent lightning overpressure.
The ETFE surface is resistant to dirt and easy to clean; 3mm thickness is ultra-thin and flexible; UV-resistant and anti-aging; light transmittance is up to 95%.
Car Roof Installation Method
1. Use 3M double-sided foam adhesive with high temperature resistance and strong adhesion to the back of the solar panel, and then stick it to the position where the car roof is to be installed.
2. Paste with solar special sealing silicone (high temperature resistance, anti-aging, and stick to firm).
3. To install solar panels on the car roof, the wire should be introduced into the car. The wire can be inserted from the place where there is a gap on the outside of the car. You can enter the car from any closed place on the car roof (doors, sunroof, travel warehouse, starting compartment).
4. It can be directly connected to the battery in the starting compartment of the car.
5. Connected to the lighter. Note:Some car key switches lock the lighter and the power is turned on, and the car key cannot be charged to the battery from the lighter.
6. Just connect the bulb wire in the car or other wires connected to the battery.
Package included
1 * Flexible Solar Panel Photovoltaic Panel
Note
1.If you have any problems or concerns, please contact us.
2.Please allow 1-3cm measuring deviation due to manual measurement.Thanks for your understanding.
3.Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
4. Even if the solar panel is bendable, please do not over bend it to damage it with a rabbit
5. It is recommended to keep the solar panel clean and dry during use to achieve the best power generation efficiency.
Weight | 2.6 kg |
---|
Customers Also Viewed
5x 10x USB 8 LED Lights Handheld Stand Desktop Reading Magnifier
$24.29PhysicsAdd to cart5x 10x USB Eight 8 LED Lights Handheld Stand Desktop Reading Maintenance Multipurpose Magnifier 75RCDescription1. [2 In 1 Design]:It is not only a handheld magnifier, but also a desktop stand magnifier. It can be used as a desk magnifier by pulling its stand and placing it on a table. It can also be folded up …
5x 10x USB 8 LED Lights Handheld Stand Desktop Reading MagnifierRead More
DALY BMS 16S 48V 30A 40A 60A 3.2V 18650 Bluetooth 485 to USB Device NTC UART Software Togther Lion LiFepo4 Battery BMS
$12.14Battery Protection ModuleAdd to cartType 30A com UART BT / Type 30A com UART 485 / Type 30A com UART 485 CAN / Type 40A com UART BT / Type 40A com UART 485 / Type 40A com UART 485 CAN / Type 60A com UART BT / Type 60A com UART 485 / Type 60A com UART 485 CAN / Type USB to CAN box / Type USB to RS485
5Pcs Geekcreit 328P Multifunction Expansion Board V3.0 for NANO UNO
$24.26Expansion Board & ShieldAdd to cartDescriptionThe extension board specifically for the NANO , welding on two rows of pins, can be used in the duemilanove 2009, U N O R1Package included5 x 328P Multifunction Expansion Board V3.0
20pcs LilyPad MCP9700 Temperature Sensor Module
$55.07Sensor & Detector ModuleAdd to cartDescriptionDetecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to digital conversion on the signal line will allow you to establish the local ambient temperature. Detect physical …
IO22C04 4 Channel Pro Mini Relay Module Expansion Board Multi-function Delay Relay PLC Power
$24.04Relay ModuleAdd to cart>>>Manual:Click here to openFeatures– Operating voltage:power supply 1,DC 6.5-25V; power supply 2,DC 5V– Operating Current:Standby current (all relays closed) 15mA, 1 relay open 45mA, 2 relays open 77mA, 3 relays open 109mA, 4 relays open 140mA– Size:80x66x19mm– Weight:79g- On-board resources:4x opto-isolated inputs (low level trigger, NPN type), 4x buttons, 1 4 bit digital tube display, …
1-1000M 3W HF FM VHF UHF FM Shortwave Broadband Amplifier Upgrade Improved Version
$30.60Other Module BoardAdd to cartApplicationsBroadband RF power amplification, suitable for HF FM VHF UHF FM transmission of various radio applications, short-wave FM remote control toys, radio walkie-talkies, digital radio stations, etc., can output up to 3 watts, 15V voltage supply, 1MHZ to 1000MHZ can work frequency range.Technical indicators1. The supply voltage Voltage:DC + 12 ~ 15V (typical 15V @ …
1-1000M 3W HF FM VHF UHF FM Shortwave Broadband Amplifier Upgrade Improved VersionRead More
Geekcreit LTDZ 35M-4400M Handheld Simple Spectrum Analyzer Measurement of interphone Signal
$159.96Test & Measuring ModuleAdd to cartNew update version:Update from December, please use the new manual.Introduction:>>>Click here to openThis product uses the local oscillator signal and the external test signal to obtain the difference frequency signal, and calculates the amplitude of the external test signal through the detector. Using a high-precision VCO source, the heterodyne signal frequency can be measured very …
Geekcreit LTDZ 35M-4400M Handheld Simple Spectrum Analyzer Measurement of interphone SignalRead More
Reviews
There are no reviews yet.