LILYGO TTGO T-Higrow BEM280 ESP32 WiFi Bluetooth DHT11 Soil Temperature and Humidity Detection Electrolyte Sensor Module
$99.74
Type #1 / Type #2 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Product main upgrade function attributes
1:Change the original ESP32 module to a single ESP32 chip.
2:The charging IC is changed from the original TP5400 to TP4054.
3:The original MICR seat is changed to TYPE-C.
4:The original normal power supply mode is changed to the button sleep wake-up mode (or the customer does the timing wake-up by himself).
5:The size of the board is 45MM smaller than the previous length, and the width is increased by 2.54MM
Added part
1:Added sleep button wake-up function (IO35)
2:Added the function of testing soil salinity (CD4060BM+TL034IDR)
3:Increase the intensity test of light (BH1750FVI)
4:Reserved external device expansion (single bus serial port IIC—-21~22)
Advantage
The battery life is much longer than before. In the case of testing moisture, you can test the soil salt and photosynthetic absorption, reasonable fertilization and proper sunshine.
Hardware:Specifications
Chipset:ESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa single- /dual-core 32-bit LX6 microprocessor
FLASH:QSPI flash 4MB
SRAM:520 kB SRAM
Button:IO0
Wake up:IO35
USB to TTL:CP2104
Modular interface:UART,SPI, SDIO, I2C, LED PWM, TV PWM, I2S, IRGPIO, capacitor touch sensor, ADC, DACLNA pre-amplifier
On-board clock:40MHz crystal oscillator
Temperature and humidity:DHT12
Reserved extension interface:21~22
Working current:About 150 mA
Sleep current:About 220 uA
Working temperature range:-4OC~+85C
Size&Weight:155.04*35*8.19mm(13.65g)
Power Supply:Specifications
Power Supply Input:USB 5V/1A
Charging current:500mA
Battery Input:3.7-4.2V
Battery:(Note:battery is not includes)
Charge IC:TP4054
JST Connector:2Pin 1.25mm
USB:Type-C
Wi-Fi:Description
Standard:FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC (ESP32 chip)
Protocol:802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and AMSDU polymerization, support 0.4uS Protection interval
Frequency range:2.4GHz~2.5GHz(2400M~2483.5M)
Transmit Power:22dBm
Communication distance:300M
Bluetooth:Description
Protocol:Meet bluetooth V4.2BR/EDR and BLE standard
Radio frequency:With -97dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH
Audio frequency:CVSD&SBC audio frequency
Software specification:Description
Wi-Fi Mode:Station/SoftAP/SoftAP+Station/P2P
Security mechanism:WPA/WPA2/WPA2-Enterprise/WPS
Encryption Type:AES/RSA/ECC/SHA
Firmware upgrade:UART download/OTA (Through network/host to download and write firmware)
Software Development:Support cloud server development /SDK for user firmware development
Networking protocol:Pv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT
User Configuration:AT+Instruction set, cloud server, android/iOSapp
OS:FreeRTOS
Package includes
1 x T-Higrow ESP32 WiFi Bluetooth Module
Weight | 0.022 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.